X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Ftarget%2Fstm32f4x.cfg;h=09ce14a5dd50f6af1c218ff91aa295fdda2752ba;hp=73b1dc8eda447150ff6c29ae0076f05060363b96;hb=f21c12abecb9df244f147740166378ede7ea398e;hpb=2c76f1ac0e27c643539b604e23435f58fa0af016

diff --git a/tcl/target/stm32f4x.cfg b/tcl/target/stm32f4x.cfg
index 73b1dc8eda..09ce14a5dd 100644
--- a/tcl/target/stm32f4x.cfg
+++ b/tcl/target/stm32f4x.cfg
@@ -50,6 +50,8 @@ $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE
 set _FLASHNAME $_CHIPNAME.flash
 flash bank $_FLASHNAME stm32f2x 0 0 0 0 $_TARGETNAME
 
+flash bank $_CHIPNAME.otp stm32f2x 0x1fff7800 0 0 0 $_TARGETNAME
+
 # JTAG speed should be <= F_CPU/6. F_CPU after reset is 16MHz, so use F_JTAG = 2MHz
 #
 # Since we may be running of an RC oscilator, we crank down the speed a