X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Ftarget%2Fstm32f4x.cfg;h=a7ec5eab3e18e5f59c3724c42520ed614cd933a9;hp=ecd39de77ca5e82070364738007d4c26b7fb75bb;hb=9c4d2946548f72d77f103b978ab30501d5953f04;hpb=41a968ec055c309d2eb669c20f831e169b4dc2e2;ds=sidebyside

diff --git a/tcl/target/stm32f4x.cfg b/tcl/target/stm32f4x.cfg
index ecd39de77c..a7ec5eab3e 100644
--- a/tcl/target/stm32f4x.cfg
+++ b/tcl/target/stm32f4x.cfg
@@ -73,13 +73,13 @@ $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE
 set _FLASHNAME $_CHIPNAME.flash
 flash bank $_FLASHNAME stm32f2x 0 0 0 0 $_TARGETNAME
 
-# JTAG speed should be <= F_CPU/6. F_CPU after reset is 8MHz, so use F_JTAG = 1MHz
+# JTAG speed should be <= F_CPU/6. F_CPU after reset is 16MHz, so use F_JTAG = 2MHz
 #
 # Since we may be running of an RC oscilator, we crank down the speed a
 # bit more to be on the safe side. Perhaps superstition, but if are
 # running off a crystal, we can run closer to the limit. Note
 # that there can be a pretty wide band where things are more or less stable.
-adapter_khz 1000
+adapter_khz 2000
 
 adapter_nsrst_delay 100
 if {[using_jtag]} {