X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Ftarget%2Fstm32l.cfg;h=1fa06f0f4698fe3d26c80564ee76926309b75c0a;hp=37bd50512fa9c2f26c5c306c2cc382c87d259a8c;hb=1ea25b85bb8ad4b4ccde1b8bff0cffe24bbb2f97;hpb=333df54fb70601559806d991d5a59c80b1943b5e;ds=sidebyside

diff --git a/tcl/target/stm32l.cfg b/tcl/target/stm32l.cfg
index 37bd50512f..1fa06f0f46 100644
--- a/tcl/target/stm32l.cfg
+++ b/tcl/target/stm32l.cfg
@@ -38,12 +38,17 @@ if {[using_jtag]} {
 if { [info exists CPUTAPID] } {
    set _CPUTAPID $CPUTAPID
 } else {
-  # See STM Document RM0038
-  # Section 24.6.3
-   set _CPUTAPID 0x4ba00477
+   if { [using_jtag] } {
+      # See STM Document RM0038
+      # Section 24.6.3
+      set _CPUTAPID 0x4ba00477
+   } {
+      set _CPUTAPID1 0x2ba01477
+      set _CPUTAPID2 0x0bc11477
+   }
 }
 
-swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID1 -expected-id $_CPUTAPID2
 
 if { [info exists BSTAPID] } {
    # FIXME this never gets used to override defaults...
@@ -55,7 +60,7 @@ if { [info exists BSTAPID] } {
 }
 
 if {[using_jtag]} {
- jtag newtap $_CHIPNAME bs -irlen 5 -expected-id $_BSTAPID
+ swj_newdap $_CHIPNAME bs -irlen 5 -expected-id $_BSTAPID
 }
 
 set _TARGETNAME $_CHIPNAME.cpu
@@ -67,9 +72,11 @@ $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE
 set _FLASHNAME $_CHIPNAME.flash
 flash bank $_FLASHNAME stm32lx 0x08000000 0 0 0 $_TARGETNAME
 
-# if srst is not fitted use SYSRESETREQ to
-# perform a soft reset
-cortex_m reset_config sysresetreq
+if {![using_hla]} {
+   # if srst is not fitted use SYSRESETREQ to
+   # perform a soft reset
+   cortex_m reset_config sysresetreq
+}
 
 proc stm32l_enable_HSI {} {
 	# Enable HSI as clock source