X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Ftarget%2Fstm32w108xx.cfg;h=0470bf6ce8f1f71ce1c78bd957a0e79f35c28fb1;hp=864917f4fcec5256c0487f2724ae720dbe271e19;hb=78c87f5e81f8b3ee2a72aa546f87985596cb2b9f;hpb=1663a17d9d5f5988a8d129a6da36ebcf728d79a2

diff --git a/tcl/target/stm32w108xx.cfg b/tcl/target/stm32w108xx.cfg
index 864917f4fc..0470bf6ce8 100644
--- a/tcl/target/stm32w108xx.cfg
+++ b/tcl/target/stm32w108xx.cfg
@@ -1,7 +1,7 @@
 #
 # Target configuration for the ST STM32W108xx chips
 #
-# Processor: ARM Cortex M3
+# Processor: ARM Cortex-M3
 # Date:      2013-06-09
 # Author:    Giuseppe Barba <giuseppe.barba@gmail.com>
 
@@ -37,15 +37,16 @@ if { [info exists CPUTAPID] } {
 set _ENDIAN little
 
 swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
 
 if {[using_jtag]} {
  if { [info exists BSTAPID] } {
    set _BSTAPID $BSTAPID
-   swj_newdap $_CHIPNAME bs -irlen 4 -ircapture 0xe -irmask 0xf -expected-id _BSTAPID
+   jtag newtap $_CHIPNAME bs -irlen 4 -ircapture 0xe -irmask 0xf -expected-id _BSTAPID
  } else {
    set _BSTAPID_1 0x169a862b
    set _BSTAPID_2 0x269a862b
-   swj_newdap $_CHIPNAME bs -irlen 4 -ircapture 0xe -irmask 0xf \
+   jtag newtap $_CHIPNAME bs -irlen 4 -ircapture 0xe -irmask 0xf \
 		-expected-id $_BSTAPID_1 -expected-id $_BSTAPID_2
  }
 }
@@ -53,7 +54,7 @@ if {[using_jtag]} {
 # Set Target
 #
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME
+target create $_TARGETNAME cortex_m -endian $_ENDIAN -dap $_CHIPNAME.dap
 $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
 
 
@@ -63,6 +64,8 @@ set _FLASHNAME $_CHIPNAME.flash
 # 64k (0x10000) of flash
 flash bank $_FLASHNAME em357 0x08000000 0x10000 0 0 $_TARGETNAME
 
+reset_config srst_nogate
+
 if {![using_hla]} {
    cortex_m reset_config sysresetreq
 }