X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=blobdiff_plain;f=tcl%2Ftarget%2Fstr912.cfg;h=38545ac905c27e68adb4780c53e8ddfa83c15627;hp=d84458495eee154462533eb69205dc10c99eeba1;hb=d4e195ad1b544b0396cab4c70437371958769196;hpb=2dfa5e9c844a5a3f8aaca146c874f13570b8f667 diff --git a/tcl/target/str912.cfg b/tcl/target/str912.cfg index d84458495e..38545ac905 100644 --- a/tcl/target/str912.cfg +++ b/tcl/target/str912.cfg @@ -1,56 +1,58 @@ # script for str9 if { [info exists CHIPNAME] } { - set _CHIPNAME $CHIPNAME + set _CHIPNAME $CHIPNAME } else { - set _CHIPNAME str912 + set _CHIPNAME str912 } if { [info exists ENDIAN] } { - set _ENDIAN $ENDIAN + set _ENDIAN $ENDIAN } else { - set _ENDIAN little + set _ENDIAN little } # jtag speed. We need to stick to 16kHz until we've finished reset. -jtag_rclk 16 +adapter_khz 16 -jtag_nsrst_delay 100 +adapter_nsrst_delay 100 jtag_ntrst_delay 100 #use combined on interfaces or targets that can't set TRST/SRST separately reset_config trst_and_srst -if { [info exists FLASHTAPID ] } { +if { [info exists FLASHTAPID] } { set _FLASHTAPID $FLASHTAPID } else { set _FLASHTAPID 0x04570041 } jtag newtap $_CHIPNAME flash -irlen 8 -ircapture 0x1 -irmask 0x1 -expected-id $_FLASHTAPID -if { [info exists CPUTAPID ] } { +if { [info exists CPUTAPID] } { set _CPUTAPID $CPUTAPID } else { set _CPUTAPID 0x25966041 } -jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID -if { [info exists BSTAPID ] } { +if { [info exists BSTAPID] } { set _BSTAPID $BSTAPID } else { + # possible values: 0x1457f041, 0x2457f041 + # we ignore version in check below set _BSTAPID 0x1457f041 } -jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_BSTAPID +jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_BSTAPID -ignore-version set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm966e -$_TARGETNAME configure -event reset-start { jtag_rclk 16 } +$_TARGETNAME configure -event reset-start { adapter_khz 16 } $_TARGETNAME configure -event reset-init { # We can increase speed now that we know the target is halted. - #jtag_rclk 3000 + #adapter_khz 3000 # -- Enable 96K RAM # PFQBC enabled / DTCM & AHB wait-states disabled @@ -63,10 +65,7 @@ $_TARGETNAME configure -event reset-init { $_TARGETNAME configure -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 0 #flash bank str9x 0 0 -set _FLASHNAME $_CHIPNAME.flash -flash bank $_FLASHNAME str9x 0x00000000 0x00080000 0 0 0 -set _FLASHNAME $_CHIPNAME.flash -flash bank $_FLASHNAME str9x 0x00080000 0x00008000 0 0 0 - -# For more information about the configuration files, take a look at: -# openocd.texi +set _FLASHNAME $_CHIPNAME.flash0 +flash bank $_FLASHNAME str9x 0x00000000 0x00080000 0 0 $_TARGETNAME +set _FLASHNAME $_CHIPNAME.flash1 +flash bank $_FLASHNAME str9x 0x00080000 0x00008000 0 0 $_TARGETNAME