summary |
shortlog |
log |
commit | commitdiff |
review |
tree
raw |
patch |
inline | side by side (from parent 1:
c46dd49)
Change-Id: Icdb517224e8bcf41a16498088e09955048077d35
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1864
Tested-by: jenkins
Reviewed-by: Bill Traynor <btraynor@gmail.com>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
*((uint32_t *)arg) = buf_get_u32(in, 0, 32);
}
*((uint32_t *)arg) = buf_get_u32(in, 0, 32);
}
static int etb_read_ram(struct etb *etb, uint32_t *data, int num_frames)
{
struct scan_field fields[3];
static int etb_read_ram(struct etb *etb, uint32_t *data, int num_frames)
{
struct scan_field fields[3];
jtag_add_dr_scan(etb->tap, 3, fields, TAP_IDLE);
for (i = 0; i < num_frames; i++) {
jtag_add_dr_scan(etb->tap, 3, fields, TAP_IDLE);
for (i = 0; i < num_frames; i++) {
- /* ensure nR/W reamins set to read */
+ /* ensure nR/W remains set to read */
buf_set_u32(&temp2, 0, 1, 0);
/* address remains set to 0x4 (RAM data) until we read the last frame */
buf_set_u32(&temp2, 0, 1, 0);
/* address remains set to 0x4 (RAM data) until we read the last frame */
{
.name = "etb",
.mode = COMMAND_ANY,
{
.name = "etb",
.mode = COMMAND_ANY,
- .help = "Emebdded Trace Buffer command group",
+ .help = "Embedded Trace Buffer command group",
.chain = etb_config_command_handlers,
},
COMMAND_REGISTRATION_DONE
.chain = etb_config_command_handlers,
},
COMMAND_REGISTRATION_DONE
* and a new branch was encountered in cycle ctx->pipe_index + retval;
*/
LOG_WARNING(
* and a new branch was encountered in cycle ctx->pipe_index + retval;
*/
LOG_WARNING(
- "abandoned branch encountered, correctnes of analysis uncertain");
+ "abandoned branch encountered, correctness of analysis uncertain");
ctx->pipe_index += retval;
continue;
}
ctx->pipe_index += retval;
continue;
}
/* if we got here the branch was a normal PC change
* (or a periodic synchronization point, which means the same for that matter)
/* if we got here the branch was a normal PC change
* (or a periodic synchronization point, which means the same for that matter)
- * if we didn't accquire a complete PC continue with the next cycle
+ * if we didn't acquire a complete PC continue with the next cycle
*/
if (!ctx->pc_ok)
continue;
*/
if (!ctx->pc_ok)
continue;
- /* indirect branch to the exception vector means an exception occured */
+ /* indirect branch to the exception vector means an exception occurred */
if ((ctx->last_branch <= 0x20)
|| ((ctx->last_branch >= 0xffff0000) &&
(ctx->last_branch <= 0xffff0020))) {
if ((ctx->last_branch <= 0x20)
|| ((ctx->last_branch >= 0xffff0000) &&
(ctx->last_branch <= 0xffff0020))) {
return retval;
else if (retval == ERROR_TRACE_INSTRUCTION_UNAVAILABLE) {
/* TODO: handle incomplete images
return retval;
else if (retval == ERROR_TRACE_INSTRUCTION_UNAVAILABLE) {
/* TODO: handle incomplete images
- * for now we just quit the analsysis*/
+ * for now we just quit the analysis*/
/* IGNORED:
* - CPRT tracing (coprocessor register transfers)
* - debug request (causes debug entry on trigger)
/* IGNORED:
* - CPRT tracing (coprocessor register transfers)
* - debug request (causes debug entry on trigger)
- * - stall on FIFOFULL (preventing tracedata lossage)
+ * - stall on FIFOFULL (preventing tracedata loss)
* check whether our setting "took".
*
* - The "clock" and "mode" bits are interpreted differently.
* check whether our setting "took".
*
* - The "clock" and "mode" bits are interpreted differently.
- * See ARM IHI 0014O table 2-17 for the old behavior, and
+ * See ARM IHI 0014O table 2-17 for the old behaviour, and
* table 2-18 for the new. With ETB it's best to specify
* "normal full" ...
*/
* table 2-18 for the new. With ETB it's best to specify
* "normal full" ...
*/
{
.name = "etm",
.mode = COMMAND_ANY,
{
.name = "etm",
.mode = COMMAND_ANY,
- .help = "Emebdded Trace Macrocell command group",
+ .help = "Embedded Trace Macrocell command group",
.usage = "",
.chain = etm_config_command_handlers,
},
.usage = "",
.chain = etm_config_command_handlers,
},
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)