cfg: Added st nucleo board configs.

This patch adds board configs for Nucleo FXXX boards.

Change-Id: I25bfd7d63f734bad710917efa67bc6096aa60ef8
Signed-off-by: Jens Hoffmann <jehoffma@gmail.com>
Reviewed-on: http://openocd.zylin.com/2022
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

diff --git a/contrib/99-openocd.rules b/contrib/99-openocd.rules
index d2e86e1bbfcc95c187e7731c2ee24a04bb504814..44ab9cc87259ad7f1a48053324c0b32f3a8888a5 100644 (file)
--- a/contrib/99-openocd.rules
+++ b/contrib/99-openocd.rules
@@ -60,6 +60,9 @@ ATTRS{idVendor}=="0483", ATTRS{idProduct}=="3744", MODE="664", GROUP="plugdev"
 # STLink v2
 ATTRS{idVendor}=="0483", ATTRS{idProduct}=="3748", MODE="664", GROUP="plugdev"
 
 # STLink v2
 ATTRS{idVendor}=="0483", ATTRS{idProduct}=="3748", MODE="664", GROUP="plugdev"
 

+# STLink v2-1
+ATTRS{idVendor}=="0483", ATTRS{idProduct}=="374b", MODE="664", GROUP="plugdev"
+

 # Hilscher NXHX Boards
 ATTRS{idVendor}=="0640", ATTRS{idProduct}=="0028", MODE="664", GROUP="plugdev"
 
 # Hilscher NXHX Boards
 ATTRS{idVendor}=="0640", ATTRS{idProduct}=="0028", MODE="664", GROUP="plugdev"
 

diff --git a/tcl/board/st_nucleo_f030r8.cfg b/tcl/board/st_nucleo_f030r8.cfg
new file mode 100644 (file)
index 0000000..5589c9c
--- /dev/null
+++ b/tcl/board/st_nucleo_f030r8.cfg
@@ -0,0 +1,9 @@
+# This is an ST NUCLEO-F030R8 board with a single STM32F030R8T6 chip.
+# http://www.st.com/web/catalog/tools/FM116/SC959/SS1532/LN1847/PF259997
+
+source [find interface/stlink-v2-1.cfg]
+
+source [find target/stm32f0x_stlink.cfg]
+
+# use hardware reset, connect under reset
+reset_config srst_only srst_nogate

diff --git a/tcl/board/st_nucleo_f103rb.cfg b/tcl/board/st_nucleo_f103rb.cfg
new file mode 100644 (file)
index 0000000..8876db7
--- /dev/null
+++ b/tcl/board/st_nucleo_f103rb.cfg
@@ -0,0 +1,9 @@
+# This is an ST NUCLEO F103RB board with a single STM32F103RBT6 chip.
+# http://www.st.com/web/catalog/tools/FM116/SC959/SS1532/LN1847/PF259875
+
+source [find interface/stlink-v2-1.cfg]
+
+source [find target/stm32f1x_stlink.cfg]
+
+# use hardware reset, connect under reset
+reset_config srst_only srst_nogate

diff --git a/tcl/board/st_nucleo_f401re.cfg b/tcl/board/st_nucleo_f401re.cfg
new file mode 100644 (file)
index 0000000..da84f14
--- /dev/null
+++ b/tcl/board/st_nucleo_f401re.cfg
@@ -0,0 +1,9 @@
+# This is an ST NUCLEO F401RE board with a single STM32F401RET6 chip.
+# http://www.st.com/web/catalog/tools/FM116/SC959/SS1532/LN1847/PF260000
+
+source [find interface/stlink-v2-1.cfg]
+
+source [find target/stm32f4x_stlink.cfg]
+
+# use hardware reset, connect under reset
+reset_config srst_only srst_nogate