board configs -- unique names for flash chips

Don't give the same names to both flash chips on two OMAP boards.

For OSK, enable DCC downloads (removing a warning).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

diff --git a/tcl/board/omap2420_h4.cfg b/tcl/board/omap2420_h4.cfg
index 12efa0531bbaeb3dd40842c8dc6ff0d0cb33c156..d789e25313aa63a5f1493c41a0fca923caa0e0e8 100644 (file)
--- a/tcl/board/omap2420_h4.cfg
+++ b/tcl/board/omap2420_h4.cfg
@@ -8,7 +8,5 @@ reset_config trst_and_srst separate
 # Board configs can vary a *LOT* ... parts, jumpers, etc.
 # This GP board boots from cs0 using NOR (2x32M), and also
 # has 64M NAND on cs6.
-set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME cfi 0x04000000 0x02000000 2 2 $_TARGETNAME
-set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME cfi 0x06000000 0x02000000 2 2 $_TARGETNAME
+flash bank h4.u10 cfi 0x04000000 0x02000000 2 2 $_TARGETNAME
+flash bank h4.u11 cfi 0x06000000 0x02000000 2 2 $_TARGETNAME

diff --git a/tcl/board/osk5912.cfg b/tcl/board/osk5912.cfg
index c33ae285ce8c2aec416774be987e36478cf05bff..f4378f8cfed5316fd26d14345dcb2f29302c7367 100644 (file)
--- a/tcl/board/osk5912.cfg
+++ b/tcl/board/osk5912.cfg
@@ -19,10 +19,8 @@ etm_dummy config $_TARGETNAME
 
 # standard boards populate two 16 MB chips, but manufacturing
 # options or an expansion board could change this config.
-set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME cfi 0x00000000 0x01000000 2 2 $_TARGETNAME
-set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME cfi 0x01000000 0x01000000 2 2 $_TARGETNAME
+flash bank osk.u1 cfi 0x00000000 0x01000000 2 2 $_TARGETNAME
+flash bank osk.u2 cfi 0x01000000 0x01000000 2 2 $_TARGETNAME
 
 proc osk5912_init {} {
        omap5912_reset
@@ -32,3 +30,5 @@ proc osk5912_init {} {
        flash probe 1
 }
 $_TARGETNAME configure -event reset-init { osk5912_init }
+
+arm7_9 dcc_downloads enable