Code Review / openocd.git / commitdiff
? search:
summary | shortlog | log | commit | commitdiff | review | tree
raw | patch | inline | side by side (parent: f5aa2e1)
tcl/board: Add Raspberry Pi 4 model B board 67/6367/5
authorJian-Hong Pan <chienhung.pan@gmail.com>
Sun, 11 Jul 2021 04:54:39 +0000 (12:54 +0800)
committerAntonio Borneo <borneo.antonio@gmail.com>
Sat, 31 Jul 2021 09:09:29 +0000 (10:09 +0100)
OpenOCD cannot connect to BCM2711's JTAG interface on RPi 4B board until
the reset configuration mode is set as trst_only.

According to Table 94. GPIO Pins Alternative Function Assignment of
Broadcom's BCM2711 ARM Peripherals datasheet [1] and Raspberry Pi's GPIO
control in config.txt document [2], only Test Reset (TRST) pin (no
System Reset, SRST) is exposed.

[1] https://datasheets.raspberrypi.org/bcm2711/bcm2711-peripherals.pdf
[2] https://www.raspberrypi.org/documentation/configuration/config-txt/gpio.md

Change-Id: I806f0be9700fa0f0944b42c8a651a5731adc762b
Link: http://openocd.zylin.com/#/c/6364/1
Signed-off-by: Jian-Hong Pan <chienhung.pan@gmail.com>
Reviewed-on: http://openocd.zylin.com/6367
Tested-by: jenkins
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
tcl/board/rpi4b.cfg [new file with mode: 0644] patch | blob

diff --git a/tcl/board/rpi4b.cfg b/tcl/board/rpi4b.cfg
new file mode 100644 (file)
index 0000000..5b046af
--- /dev/null
+++ b/tcl/board/rpi4b.cfg
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+# This is the Raspberry Pi 4 model B board with BCM2711 chip
+# https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2711/README.md
+#
+# Enable JTAG GPIO on Raspberry Pi boards
+# https://www.raspberrypi.org/documentation/configuration/config-txt/gpio.md
+
+source [find target/bcm2711.cfg]
+transport select jtag
+
+# Raspberry Pi boards only expose Test Reset (TRST) pin, no System Reset (SRST)
+reset_config trst_only
Open On-Chip Debugger

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)