i.MX25: Set OOB size (MXC NFC)

SPAS register (OOB size) is left wrong after reset with respect to 2KiB page NAND chip. That will lead to ECC errors after 'reset halt'.

Change-Id: If5a4685cb8d6be35879453951611ef1059da219c
Signed-off-by: Timo Ketola <timo@exertus.fi>
Reviewed-on: http://openocd.zylin.com/384
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

diff --git a/src/flash/nand/mxc.c b/src/flash/nand/mxc.c
index b6694ca0dd3dfe39291a3e9d4471c980c5f51335..30170190ea4db97aa3051f90f23d61d11d10a329 100644 (file)
--- a/src/flash/nand/mxc.c
+++ b/src/flash/nand/mxc.c
@@ -39,6 +39,7 @@
  * !! all function only tested with 2k page nand device; mxc_write_page
  *    writes the 4 MAIN_BUFFER's and is not compatible with < 2k page
  * !! oob must be be used due to NFS bug
+ * !! oob must be 64 bytes per 2KiB page
 */
 #ifdef HAVE_CONFIG_H
 #include "config.h"
@@ -48,6 +49,8 @@
 #include "mxc.h"
 #include <target/target.h>
 
+#define        OOB_SIZE        64
+
 #define nfc_is_v1() (mxc_nf_info->mxc_version == MXC_VERSION_MX27 || \
                                        mxc_nf_info->mxc_version == MXC_VERSION_MX31)
 #define nfc_is_v2() (mxc_nf_info->mxc_version == MXC_VERSION_MX25 || \
@@ -732,6 +735,7 @@ static int initialize_nf_controller(struct nand_device *nand)
                LOG_DEBUG("MXC_NF : work without ECC mode");
        }
        if (nfc_is_v2()) {
+               target_write_u16(target, MXC_NF_V2_SPAS, OOB_SIZE / 2);
                if (nand->page_size) {
                        uint16_t pages_per_block = nand->erase_size / nand->page_size;
                        work_mode |= MXC_NF_V2_CFG1_PPB(ffs(pages_per_block) - 6);