doc:usb_adapters: add lsusb dump of esp_usb_jtag

Also, esp_usb_jtag added to the supported driver list of
"adapter serial" command.

Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: Ie65cbf9b44f5de6d7995102d1a281161468f6103
Reviewed-on: https://review.openocd.org/c/openocd/+/7440
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

diff --git a/doc/openocd.texi b/doc/openocd.texi
index aa1707b7dfae81e21278fa62b319244b1596e53b..b9ad3ff77d2ea17ce281bd2ea606b29fe86c389e 100644 (file)
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -2480,7 +2480,7 @@ This command is only available if your libusb1 is at least version 1.0.16.
 Specifies the @var{serial_string} of the adapter to use.
 If this command is not specified, serial strings are not checked.
 Only the following adapter drivers use the serial string from this command:
-arm-jtag-ew, cmsis_dap, ft232r, ftdi, hla (stlink, ti-icdi), jlink, kitprog, opendus,
+arm-jtag-ew, cmsis_dap, esp_usb_jtag, ft232r, ftdi, hla (stlink, ti-icdi), jlink, kitprog, opendus,
 openjtag, osbdm, presto, rlink, st-link, usb_blaster (ublast2), usbprog, vsllink, xds110.
 @end deffn
 

diff --git a/doc/usb_adapters/esp_usb_jtag/303a_1001_esp_usb_jtag.txt b/doc/usb_adapters/esp_usb_jtag/303a_1001_esp_usb_jtag.txt
new file mode 100644 (file)
index 0000000..8da58e5
--- /dev/null
+++ b/doc/usb_adapters/esp_usb_jtag/303a_1001_esp_usb_jtag.txt
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: GPL-2.0-or-later OR GFDL-1.2-no-invariants-or-later
+
+# Optional comment
+
+Bus 002 Device 035: ID 303a:1001
+Device Descriptor:
+  bLength                18
+  bDescriptorType         1
+  bcdUSB               2.00
+  bDeviceClass          239 Miscellaneous Device
+  bDeviceSubClass         2
+  bDeviceProtocol         1 Interface Association
+  bMaxPacketSize0        64
+  idVendor           0x303a
+  idProduct          0x1001
+  bcdDevice            1.01
+  iManufacturer           1 Espressif
+  iProduct                2 USB JTAG/serial debug unit
+  iSerial                 3 7C:DF:A1:A2:8F:38
+  bNumConfigurations      1
+  Configuration Descriptor:
+    bLength                 9
+    bDescriptorType         2
+    wTotalLength       0x0062
+    bNumInterfaces          3
+    bConfigurationValue     1
+    iConfiguration          0
+    bmAttributes         0xc0
+      Self Powered
+    MaxPower              500mA
+    Interface Association:
+      bLength                 8
+      bDescriptorType        11
+      bFirstInterface         0
+      bInterfaceCount         2
+      bFunctionClass          2 Communications
+      bFunctionSubClass       2 Abstract (modem)
+      bFunctionProtocol       0
+      iFunction               0
+    Interface Descriptor:
+      bLength                 9
+      bDescriptorType         4
+      bInterfaceNumber        0
+      bAlternateSetting       0
+      bNumEndpoints           1
+      bInterfaceClass         2 Communications
+      bInterfaceSubClass      2 Abstract (modem)
+      bInterfaceProtocol      0
+      iInterface              0
+      CDC Header:
+        bcdCDC               1.10
+      CDC ACM:
+        bmCapabilities       0x02
+          line coding and serial state
+      CDC Union:
+        bMasterInterface        0
+        bSlaveInterface         1
+      CDC Call Management:
+        bmCapabilities       0x03
+          call management
+          use DataInterface
+        bDataInterface          1
+      Endpoint Descriptor:
+        bLength                 7
+        bDescriptorType         5
+        bEndpointAddress     0x82  EP 2 IN
+        bmAttributes            3
+          Transfer Type            Interrupt
+          Synch Type               None
+          Usage Type               Data
+        wMaxPacketSize     0x0040  1x 64 bytes
+        bInterval               1
+    Interface Descriptor:
+      bLength                 9
+      bDescriptorType         4
+      bInterfaceNumber        1
+      bAlternateSetting       0
+      bNumEndpoints           2
+      bInterfaceClass        10 CDC Data
+      bInterfaceSubClass      2
+      bInterfaceProtocol      0
+      iInterface              0
+      Endpoint Descriptor:
+        bLength                 7
+        bDescriptorType         5
+        bEndpointAddress     0x01  EP 1 OUT
+        bmAttributes            2
+          Transfer Type            Bulk
+          Synch Type               None
+          Usage Type               Data
+        wMaxPacketSize     0x0040  1x 64 bytes
+        bInterval               1
+      Endpoint Descriptor:
+        bLength                 7
+        bDescriptorType         5
+        bEndpointAddress     0x81  EP 1 IN
+        bmAttributes            2
+          Transfer Type            Bulk
+          Synch Type               None
+          Usage Type               Data
+        wMaxPacketSize     0x0040  1x 64 bytes
+        bInterval               1
+    Interface Descriptor:
+      bLength                 9
+      bDescriptorType         4
+      bInterfaceNumber        2
+      bAlternateSetting       0
+      bNumEndpoints           2
+      bInterfaceClass       255 Vendor Specific Class
+      bInterfaceSubClass    255 Vendor Specific Subclass
+      bInterfaceProtocol      1
+      iInterface              0
+      Endpoint Descriptor:
+        bLength                 7
+        bDescriptorType         5
+        bEndpointAddress     0x02  EP 2 OUT
+        bmAttributes            2
+          Transfer Type            Bulk
+          Synch Type               None
+          Usage Type               Data
+        wMaxPacketSize     0x0040  1x 64 bytes
+        bInterval               1
+      Endpoint Descriptor:
+        bLength                 7
+        bDescriptorType         5
+        bEndpointAddress     0x83  EP 3 IN
+        bmAttributes            2
+          Transfer Type            Bulk
+          Synch Type               None
+          Usage Type               Data
+        wMaxPacketSize     0x0040  1x 64 bytes
+        bInterval               1
+Device Status:     0x0001
+  Self Powered

diff --git a/doc/usb_adapters/readme.txt b/doc/usb_adapters/readme.txt
index 1d995e99f1d1847fb96b66a2301eab71a4f73b2e..19df4cf70fc65374ff474926697e62837e9228b1 100644 (file)
--- a/doc/usb_adapters/readme.txt
+++ b/doc/usb_adapters/readme.txt
@@ -15,6 +15,7 @@ OpenOCD gerrit, as explained in HACKING.
 
 The dumps are organized in subfolders corresponding to OpenOCD drivers:
 - cmsis_dap;
+- esp_usb_jtag;
 - ft232r;
 - ftdi;
 - icdi;