delete obsolete code
authoroharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>
Thu, 4 Dec 2008 09:35:00 +0000 (09:35 +0000)
committeroharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>
Thu, 4 Dec 2008 09:35:00 +0000 (09:35 +0000)
git-svn-id: svn://svn.berlios.de/openocd/trunk@1211 b42882b7-edfa-0310-969c-e2dbd0fdcd60

src/ecosboard.c

index 349ff6d6570c08e44cbc530a64bec29e350a3be6..b6fbc495bd4b95558c91b77890ebd778ca9d8997 100644 (file)
@@ -353,6 +353,9 @@ extern target_type_t *target_types[];
 
 extern char _stext, _etext; // Defined by the linker
 
+static char *start_of_code=&_stext;
+static char *end_of_code=&_etext;
+
 void start_profile(void)
 {
        // This starts up the system-wide profiling, gathering
@@ -370,9 +373,9 @@ void start_profile(void)
        //       too large, the usefulness of the profile is reduced.
 
        // no more interrupts than 1/10ms.
-       //    profile_on(&_stext, &_etext, 16, 10000); // DRAM
        //profile_on((void *)0, (void *)0x40000, 16, 10000); // SRAM
-       profile_on(0, &_etext, 16, 10000); // SRAM & DRAM
+//     profile_on(0, &_etext, 16, 10000); // SRAM & DRAM
+       profile_on(start_of_code, end_of_code, 16, 10000); // Nios DRAM
 }
 #endif
 
@@ -1917,7 +1920,7 @@ int main(int argc, char *argv[])
                                reboot();
                        }
 
-                       err = mount("/dev/ram", "/config", "jffs2");
+                       err = mount("", "/config", "ramfs");
                        if (err < 0)
                        {
                                diag_printf("unable to mount ram block device\n");
@@ -2553,122 +2556,3 @@ static int logfs_fo_close(struct CYG_FILE_TAG *fp)
        return ENOERR;
 }
 
-static bool
-ramiodev_init( struct cyg_devtab_entry *tab )
-{
-       return true;
-}
-
-static Cyg_ErrNo
-ramiodev_bread( cyg_io_handle_t handle, void *buf, cyg_uint32 *len,
-                  cyg_uint32 pos)
-{
-       if (*len+pos>ramblockdevice_size)
-       {
-               *len=ramblockdevice_size-pos;
-       }
-       memcpy(buf, ramblockdevice+pos, *len);
-       return ENOERR;
-}
-
-static Cyg_ErrNo
-ramiodev_bwrite( cyg_io_handle_t handle, const void *buf, cyg_uint32 *len,
-                   cyg_uint32 pos )
-{
-       if (((pos%4)!=0)||(((*len)%4)!=0))
-       {
-               diag_printf("Unaligned write %d %d!", pos, *len);
-       }
-
-       memcpy(ramblockdevice+pos, buf, *len);
-       return ENOERR;
-}
-
-static Cyg_ErrNo
-ramiodev_get_config( cyg_io_handle_t handle,
-                       cyg_uint32 key,
-                       void* buf,
-                       cyg_uint32* len)
-{
-    switch (key) {
-    case CYG_IO_GET_CONFIG_FLASH_ERASE:
-    {
-        if ( *len != sizeof( cyg_io_flash_getconfig_erase_t ) )
-             return -EINVAL;
-        {
-            cyg_io_flash_getconfig_erase_t *e = (cyg_io_flash_getconfig_erase_t *)buf;
-            char *startpos = ramblockdevice + e->offset;
-
-            if (((e->offset%(64*1024))!=0)||((e->len%(64*1024))!=0))
-            {
-               diag_printf("Erease is not aligned %d %d\n", e->offset, e->len);
-            }
-
-            memset(startpos, 0xff, e->len);
-
-            e->flasherr = 0;
-        }
-        return ENOERR;
-    }
-    case CYG_IO_GET_CONFIG_FLASH_DEVSIZE:
-    {
-        if ( *len != sizeof( cyg_io_flash_getconfig_devsize_t ) )
-             return -EINVAL;
-        {
-            cyg_io_flash_getconfig_devsize_t *d =
-                (cyg_io_flash_getconfig_devsize_t *)buf;
-
-                       d->dev_size = ramblockdevice_size;
-        }
-        return ENOERR;
-    }
-
-    case CYG_IO_GET_CONFIG_FLASH_BLOCKSIZE:
-    {
-        cyg_io_flash_getconfig_blocksize_t *b =
-            (cyg_io_flash_getconfig_blocksize_t *)buf;
-        if ( *len != sizeof( cyg_io_flash_getconfig_blocksize_t ) )
-             return -EINVAL;
-
-        // offset unused for now
-               b->block_size = 64*1024;
-        return ENOERR;
-    }
-
-    default:
-        return -EINVAL;
-    }
-}
-
-static Cyg_ErrNo
-ramiodev_set_config( cyg_io_handle_t handle,
-                       cyg_uint32 key,
-                       const void* buf,
-                       cyg_uint32* len)
-{
-
-    switch (key) {
-    default:
-        return -EINVAL;
-    }
-} // ramiodev_set_config()
-
-// get_config/set_config should be added later to provide the other flash
-// operations possible, like erase etc.
-
-BLOCK_DEVIO_TABLE( cyg_io_ramdev1_ops,
-                   &ramiodev_bwrite,
-                   &ramiodev_bread,
-                   0, // no select
-                   &ramiodev_get_config,
-                   &ramiodev_set_config
-    );
-
-
-BLOCK_DEVTAB_ENTRY( cyg_io_ramdev1,
-                    "/dev/ram",
-                    0,
-                    &cyg_io_ramdev1_ops,
-                    &ramiodev_init,
-                    0, // No lookup required
-                    NULL );

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)