flash: fix stm32 failed probe using incorrect flash size

This fixes an issue if the device is manually probed after the initial probe
fails due to being unable to read flash size register. In this situation the
driver assumes the user has overridden the flash size when infact this may
not be the case.

It also seems on the older stm32f1 devices the flash register is not readable
when locked, this does not seem to apply to the newer parts - f0, f3, f4.

Change-Id: I125f872fcb2d962ca6705f97b62d957e2b31303b
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1187
Tested-by: jenkins
Reviewed-by: Johan Almquist <johan.almquist@assaabloy.com>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>

diff --git a/src/flash/nor/stm32f1x.c b/src/flash/nor/stm32f1x.c
index 8f2e69e6858a89b13c3d0c8ca4273cd19759c21e..7e32098c3276f4a1f7096ed7dc785ca9f7b475f5 100644 (file)
--- a/src/flash/nor/stm32f1x.c
+++ b/src/flash/nor/stm32f1x.c
@@ -125,6 +125,7 @@ struct stm32x_flash_bank {
        uint16_t default_rdp;
        int user_data_offset;
        int option_offset;
        uint16_t default_rdp;
        int user_data_offset;
        int option_offset;

+       uint32_t user_bank_size;

 };
 
 static int stm32x_mass_erase(struct flash_bank *bank);
 };
 
 static int stm32x_mass_erase(struct flash_bank *bank);


@@ -147,6 +148,7 @@ FLASH_BANK_COMMAND_HANDLER(stm32x_flash_bank_command)
        stm32x_info->probed = 0;
        stm32x_info->has_dual_banks = false;
        stm32x_info->register_base = FLASH_REG_BASE_B0;
        stm32x_info->probed = 0;
        stm32x_info->has_dual_banks = false;
        stm32x_info->register_base = FLASH_REG_BASE_B0;

+       stm32x_info->user_bank_size = bank->size;

 
        return ERROR_OK;
 }
 
        return ERROR_OK;
 }


@@ -963,9 +965,9 @@ static int stm32x_probe(struct flash_bank *bank)
 
        /* if the user sets the size manually then ignore the probed value
         * this allows us to work around devices that have a invalid flash size register value */
 
        /* if the user sets the size manually then ignore the probed value
         * this allows us to work around devices that have a invalid flash size register value */

-       if (bank->size) {
+       if (stm32x_info->user_bank_size) {

                LOG_INFO("ignoring flash probed value, using configured bank size");
                LOG_INFO("ignoring flash probed value, using configured bank size");

-               flash_size_in_kb = bank->size / 1024;
+               flash_size_in_kb = stm32x_info->user_bank_size / 1024;

        }
 
        LOG_INFO("flash size = %dkbytes", flash_size_in_kb);
        }
 
        LOG_INFO("flash size = %dkbytes", flash_size_in_kb);

diff --git a/src/flash/nor/stm32f2x.c b/src/flash/nor/stm32f2x.c
index 1d59e3c02c979fac920f0d58b08b5480fcb32313..aa749a510a1228819dfbbd47266b6090b4aa273d 100644 (file)
--- a/src/flash/nor/stm32f2x.c
+++ b/src/flash/nor/stm32f2x.c
@@ -158,6 +158,7 @@ struct stm32x_flash_bank {
        struct stm32x_options option_bytes;
        int probed;
        bool has_large_mem;             /* stm32f42x/stm32f43x family */
        struct stm32x_options option_bytes;
        int probed;
        bool has_large_mem;             /* stm32f42x/stm32f43x family */

+       uint32_t user_bank_size;

 };
 
 /* flash bank stm32x <base> <size> 0 0 <target#>
 };
 
 /* flash bank stm32x <base> <size> 0 0 <target#>


@@ -173,6 +174,7 @@ FLASH_BANK_COMMAND_HANDLER(stm32x_flash_bank_command)
        bank->driver_priv = stm32x_info;
 
        stm32x_info->probed = 0;
        bank->driver_priv = stm32x_info;
 
        stm32x_info->probed = 0;

+       stm32x_info->user_bank_size = bank->size;

 
        return ERROR_OK;
 }
 
        return ERROR_OK;
 }


@@ -793,9 +795,9 @@ static int stm32x_probe(struct flash_bank *bank)
 
        /* if the user sets the size manually then ignore the probed value
         * this allows us to work around devices that have a invalid flash size register value */
 
        /* if the user sets the size manually then ignore the probed value
         * this allows us to work around devices that have a invalid flash size register value */

-       if (bank->size) {
+       if (stm32x_info->user_bank_size) {

                LOG_INFO("ignoring flash probed value, using configured bank size");
                LOG_INFO("ignoring flash probed value, using configured bank size");

-               flash_size_in_kb = bank->size / 1024;
+               flash_size_in_kb = stm32x_info->user_bank_size / 1024;

        }
 
        LOG_INFO("flash size = %dkbytes", flash_size_in_kb);
        }
 
        LOG_INFO("flash size = %dkbytes", flash_size_in_kb);

diff --git a/src/flash/nor/stm32lx.c b/src/flash/nor/stm32lx.c
index a475841a3d3685eef01a4417fc3f4c24f81a8a8d..61ae57407c08605fae5ec60f2d1855260f6f8944 100644 (file)
--- a/src/flash/nor/stm32lx.c
+++ b/src/flash/nor/stm32lx.c
@@ -122,6 +122,7 @@ static int stm32lx_wait_until_bsy_clear(struct flash_bank *bank);
 struct stm32lx_flash_bank {
        int probed;
        bool has_dual_banks;
 struct stm32lx_flash_bank {
        int probed;
        bool has_dual_banks;

+       uint32_t user_bank_size;

 };
 
 /* flash bank stm32lx <base> <size> 0 0 <target#>
 };
 
 /* flash bank stm32lx <base> <size> 0 0 <target#>


@@ -145,6 +146,7 @@ FLASH_BANK_COMMAND_HANDLER(stm32lx_flash_bank_command)
 
        stm32lx_info->probed = 0;
        stm32lx_info->has_dual_banks = false;
 
        stm32lx_info->probed = 0;
        stm32lx_info->has_dual_banks = false;

+       stm32lx_info->user_bank_size = bank->size;

 
        return ERROR_OK;
 }
 
        return ERROR_OK;
 }


@@ -597,8 +599,8 @@ static int stm32lx_probe(struct flash_bank *bank)
 
        /* if the user sets the size manually then ignore the probed value
         * this allows us to work around devices that have a invalid flash size register value */
 
        /* if the user sets the size manually then ignore the probed value
         * this allows us to work around devices that have a invalid flash size register value */

-       if (bank->size) {
-               flash_size_in_kb = bank->size / 1024;
+       if (stm32lx_info->user_bank_size) {
+               flash_size_in_kb = stm32lx_info->user_bank_size / 1024;

                LOG_INFO("ignoring flash probed value, using configured bank size: %dkbytes", flash_size_in_kb);
        }
 
                LOG_INFO("ignoring flash probed value, using configured bank size: %dkbytes", flash_size_in_kb);
        }