Engine) mode built into many FTDI chips, such as the FT2232, FT4232 and FT232H.
The driver is using libusb-1.0 in asynchronous mode to talk to the FTDI device,
-bypassing intermediate libraries like libftdi or D2XX.
+bypassing intermediate libraries like libftdi.
Support for new FTDI based adapters can be added completely through
configuration files, without the need to patch and rebuild OpenOCD.
for FTDI chips. These interfaces have several commands, used to
configure the driver before initializing the JTAG scan chain:
-@deffn {Config Command} {usb_blaster device_desc} description
-Provides the USB device description (the @emph{iProduct string})
-of the FTDI FT245 device. If not
-specified, the FTDI default value is used. This setting is only valid
-if compiled with FTD2XX support.
-@end deffn
-
@deffn {Config Command} {usb_blaster vid_pid} vid pid
The vendor ID and product ID of the FTDI FT245 device. If not specified,
default values are used.
/*******************************************************************************
* Driver for OpenJTAG Project (www.openjtag.org) *
- * Compatible with libftdi and ftd2xx drivers. *
+ * Compatible with libftdi drivers. *
* *
* Cypress CY7C65215 support *
* Copyright (C) 2015 Vianney le Clément de Saint-Marcq, Essensium NV *
uint16_t ublast_pid;
uint16_t ublast_vid_uninit;
uint16_t ublast_pid_uninit;
- char *ublast_device_desc;
struct libusb_device_handle *libusb_dev;
char *firmware_path;
char *lowlevel_name;
struct ublast_lowlevel *drv;
- char *ublast_device_desc;
uint16_t ublast_vid, ublast_pid;
uint16_t ublast_vid_uninit, ublast_pid_uninit;
int flags;
};
/*
- * Available lowlevel drivers (FTDI, FTD2xx, ...)
+ * Available lowlevel drivers (FTDI, libusb, ...)
*/
struct drvs_map {
char *name;
info.drv->ublast_pid = info.ublast_pid;
info.drv->ublast_vid_uninit = info.ublast_vid_uninit;
info.drv->ublast_pid_uninit = info.ublast_pid_uninit;
- info.drv->ublast_device_desc = info.ublast_device_desc;
info.drv->firmware_path = info.firmware_path;
info.flags |= info.drv->flags;
return info.drv->close(info.drv);
}
-COMMAND_HANDLER(ublast_handle_device_desc_command)
-{
- if (CMD_ARGC != 1)
- return ERROR_COMMAND_SYNTAX_ERROR;
-
- info.ublast_device_desc = strdup(CMD_ARGV[0]);
-
- return ERROR_OK;
-}
-
COMMAND_HANDLER(ublast_handle_vid_pid_command)
{
if (CMD_ARGC > 4) {
static const struct command_registration ublast_subcommand_handlers[] = {
- {
- .name = "device_desc",
- .handler = ublast_handle_device_desc_command,
- .mode = COMMAND_CONFIG,
- .help = "set the USB device description of the USB-Blaster",
- .usage = "description-string",
- },
{
.name = "vid_pid",
.handler = ublast_handle_vid_pid_command,
+++ /dev/null
-# -*- mode: makefile -*-
-#
-default: _complain_
-include ./local.uses
-
-%: _complain_
-
-
-_complain_:
- @echo ""
- @echo " Try the target: cygwin.buildtest or linux.buildtest "
- @echo ""
-
-remove.install:
- rm -rf ${INSTALL_DIR}
-
-.PHONY: remove.install
-
-cygwin.buildtest:
- ${MAKE} -f Makefile.ftd2xx clean all
- ${MAKE} -f Makefile.openocd cygwin.easy.permutations
- ${MAKE} -f Makefile.openocd mingw32.easy.permutations
- ${MAKE} -f Makefile.libftdi all
- ${MAKE} -f Makefile.openocd cygwin.libftdi
-
-linux.buildtest:
- ${MAKE} linux.easy.buildtest
- ${MAKE} linux.ftd2xx_installed
- ${MAKE} linux.ft2232_libftdi
- @echo ""
- @echo ""
- @echo "========================================"
- @echo " Linux Build Tests Complete "
- @echo "========================================"
- @echo ""
- @echo ""
-
-
-linux.easy.buildtest:
- @test -d openocd || (echo "Where the source to openocd?" && exit 1)
- ${MAKE} -f Makefile.openocd bootstrap
- ${MAKE} -f Makefile.ftd2xx all
- ${MAKE} -f Makefile.openocd linux.easy.permutations
-
-linux.ftd2xx_installed:
- ${MAKE} remove.install
- ${MAKE} linux.ftd2xx_installed.setup
- ${MAKE} -f Makefile.openocd $@
-
- linux.ft2232_libftdi:
- ${MAKE} remove.install
- ${MAKE} -f Makefile.libusb all
- ${MAKE} -f Makefile.confuse all
- ${MAKE} -f Makefile.libftdi all
- ${MAKE} -f Makefile.openocd $@
-
-# This target is used to "install" files from
-# the FTDICHIP.COM tar.gz unpack directory
-# into "a proper place" - where they should be found.
-linux.ftd2xx_installed.setup:
- mkdir -p ${INSTALL_DIR}/include
- mkdir -p ${EXEC_PREFIX}/lib
- @#
- @# Sanity check - make sure the .H file is findable
- @#
- @f=$(FTD2XX_LINUX_DIR)/ftd2xx.h && \
- test -f $$f || (echo "Error: $$f not found" ; exit 1)
- @#
- @# Header files are simple... just copy them.
- @#
- cp $(FTD2XX_LINUX_DIR)/ftd2xx.h $(PREFIX)/include/.
- cp $(FTD2XX_LINUX_DIR)/WinTypes.h $(PREFIX)/include/.
- @#
- @# .SO files are harder.
- @# (1) copy them, (2) make links
- @#
- cp $(FTD2XX_LINUX_DIR)/libftd2xx.so.$(FTD2XX_LINUX_VERSION) $(EXEC_PREFIX)/lib/.
- cd $(EXEC_PREFIX)/lib && rm -f libftd2xx.so.0
- cd $(EXEC_PREFIX)/lib && ln -s libftd2xx.so.$(FTD2XX_LINUX_VERSION) libftd2xx.so.0
- cd $(EXEC_PREFIX)/lib && rm -f libftd2xx.so
- cd $(EXEC_PREFIX)/lib && ln -s libftd2xx.so.$(FTD2XX_LINUX_VERSION) libftd2xx.so
-
-
-all.download:
- mkdir -p ${VIRGINS}
- ${MAKE} -f Makefile.confuse download
- ${MAKE} -f Makefile.libftdi download
- ${MAKE} -f Makefile.ftd2xx download
- ${MAKE} -f Makefile.libusb download
-
-.PHONY: linux.buildtest \
- linux.easy.buildtest \
- linux.ftd2xx_installed \
- linux.ft22232_libftdi \
- linux.ftd2xx_installed.setup
+++ /dev/null
-# -*- mode: makefile -*-
-default: _complain_
-include ./local.uses
-
-TARFILE_LOCAL=${VIRGINS}/confuse-${LIBCONFUSE_VERSION}.tar.gz
-TARFILE_URL =http://www.intra2net.com/de/produkte/opensource/ftdi/TGZ/confuse-${LIBCONFUSE_VERSION}.tar.gz
-
-CONFUSE_SRC_DIR =${HERE}/confuse-${LIBCONFUSE_VERSION}
-CONFUSE_BUILD_DIR =${HERE}/confuse-build
-
-download:
- wget -O ${TARFILE_LOCAL} ${TARFILE_URL}
-
-unpack:
- rm -rf ${CONFUSE_SRC_DIR}
- tar xfz ${TARFILE_LOCAL}
-
-clean::
- rm -rf ${CONFUSE_SRC_DIR}
-
-configure:
- rm -rf ${CONFUSE_BUILD_DIR}
- mkdir ${CONFUSE_BUILD_DIR}
- cd ${CONFUSE_BUILD_DIR} && ${CONFUSE_SRC_DIR}/configure \
- --prefix=${PREFIX} \
- --exec-prefix=${EXEC_PREFIX}
-
-clean::
- rm -rf ${CONFUSE_BUILD_DIR}
-
-build:
- cd ${CONFUSE_BUILD_DIR} && ${MAKE}
-
-install:
- cd ${CONFUSE_BUILD_DIR} && ${MAKE} install
-
-all: unpack configure build install
-
-_complain_:
- @echo ""
- @echo "Please try one of these targets: bootstrap, clean, configure, build, install"
- @echo " Or read the makefile and learn about the permutation test targets"
- @echo ""
- @echo "You also might find the download and unpack targets helpful."
- @echo ""
- @exit 1
+++ /dev/null
-# -*- mode: makefile -*-
-#
-default: _complain_
-
-include ./local.uses
-
-# WARNING... the file on the ftdi chip site has a SPACE in the filename GRRR!!!
-# We fix that with the "-O" option to wget.
-ZIPFILE_LOCAL=${VIRGINS}/cdm.${FTD2XX_WIN32_VERSION}.zip
-ZIPFILE_URL ="http://www.ftdichip.com/Drivers/CDM/CDM ${FTD2XX_WIN32_VERSION}.zip"
-
-TARFILE_LOCAL=${VIRGINS}/libftd2xx${FTD2XX_LINUX_VERSION}.tar.gz
-TARFILE_URL =http://www.ftdichip.com/Drivers/D2XX/Linux/libftd2xx${FTD2XX_LINUX_VERSION}.tar.gz
-
-TARFILE_64_LOCAL=${VIRGINS}/libftd2xx${FTD2XX_LINUX_VERSION}_x86_64.tar.gz
-TARFILE_64_URL =http://www.ftdichip.com/Drivers/D2XX/Linux/libftd2xx${FTD2XX_LINUX_VERSION}_x86_64.tar.gz
-
-
-download.win32:
- mkdir -p ${VIRGINS}
- wget -O ${ZIPFILE_LOCAL} ${ZIPFILE_URL}
-
-unpack.win32:
- rm -rf ${FTD2XX_WIN32_DIR}
- mkdir -p ${FTD2XX_WIN32_DIR}
- cd ${FTD2XX_WIN32_DIR} && unzip ${ZIPFILE_LOCAL}
-
-clean::
- rm -rf ${FTD2XX_WIN32_DIR}
-
-download.linux:
- mkdir -p ${VIRGINS}
- wget -O ${TARFILE_LOCAL} ${TARFILE_URL}
-
-clean::
- rm -rf ${FTD2XX_LINUX_DIR}
-
-unpack.linux:
- rm -rf ${FTD2XX_LINUX_DIR}
- mkdir -p ${FTD2XX_LINUX_DIR}
- tar xfz ${TARFILE_LOCAL}
-
-download.linux.x86_64:
- mkdir -p ${VIRGINS}
- wget -O ${TARFILE_LOCAL} ${TARFILE_URL}
-
-unpack.linux.x86_64:
- rm -rf ${FTD2XX_LINUX_64_DIR}
- mkdir -p ${FTD2XX_LINUX_64_DIR}
- tar xfz ${TARFILE_64_LOCAL}
-
-clean::
- rm -rf ${FTD2XX_LINUX_64_DIR}
-
-download: download.win32 download.linux
-
-unpack.cygwin unpack.mingw32: unpack.win32
-
-unpack: unpack.${BUILD_SYSNAME}
-
-# Nothing to do here
-build:
- @echo "Done"
-
-#Nothing to do here
-configure:
- @echo "Done"
-
-# Nothing to do here
-install:
- @echo "Done"
-
-all: unpack configure build install
-
-.PHONY: install
-
-# Nothing to do here
-clean::
- @echo "Done"
-
-_complain_:
- @echo ""
- @echo "Please try one of these targets: bootstrap, clean, configure, build, install"
- @echo " Or read the makefile and learn about the permutation test targets"
- @echo ""
- @echo "You also might find the download and unpack targets helpful."
- @echo ""
- @exit 1
+++ /dev/null
-# -*- mode: makefile -*-
-default: _complain_
-include ./local.uses
-
-TARFILE_LOCAL = ${VIRGINS}/libftdi-${LIBFTDI_VERSION}.tar.gz
-TARFILE_URL = http://www.intra2net.com/de/produkte/opensource/ftdi/TGZ/libftdi-${LIBFTDI_VERSION}.tar.gz
-
-LIBFTDI_SRC_DIR = ${HERE}/libftdi-${LIBFTDI_VERSION}
-LIBFTDI_BUILD_DIR= ${HERE}/libftdi-build
-
-download:
- mkdir -p virgins
- wget -O ${TARFILE_LOCAL} ${TARFILE_URL}
-
-clean::
- rm -rf ${LIBFTDI_SRC_DIR}
-
-unpack:
- tar xf ${TARFILE_LOCAL}
-
-PATH := ${EXEC_PREFIX}/bin:${PATH}
-export PATH
-
-clean::
- rm -rf ${LIBFTDI_BUILD_DIR}
-
-configure:
- rm -rf ${LIBFTDI_BUILD_DIR}
- mkdir -p ${LIBFTDI_BUILD_DIR}
- cd ${LIBFTDI_BUILD_DIR} && ${LIBFTDI_SRC_DIR}/configure \
- --prefix=${PREFIX} \
- --exec-prefix=${EXEC_PREFIX}
-
-build:
- cd ${LIBFTDI_BUILD_DIR} && ${MAKE}
-
-install:
- cd ${LIBFTDI_BUILD_DIR} && ${MAKE} install
-
-all: unpack configure build install
-
-.PHONY: install
-
-_complain_:
- @echo ""
- @echo "Please try one of these targets: bootstrap, clean, configure, build, install"
- @echo " Or read the makefile and learn about the permutation test targets"
- @echo ""
- @echo "You also might find the download and unpack targets helpful."
- @echo ""
- @exit 1
+++ /dev/null
-# -*- mode: makefile -*-
-default: _complain_
-
-include ./local.uses
-
-ifeq (x"$BUILD_SYSNAME",x"cygwin")
-$(error Please use the Win32 specific port of LibUSB not the Unix version)
-endif
-ifeq (x"$BUILD_SYSNAME",x"mingw32")
-$(error Please use the win32 specific port of LibUSB not the Unix version)
-endif
-
-TARFILE_LOCAL = ${VIRGINS}/libusb-${LIBUSB_VERSION_linux}.tar.bz2
-TARFILE_URL = http://downloads.sourceforge.net/libusb/libusb-${LIBUSB_VERSION_linux}.tar.gz
-
-LIBUSB_SRC_DIR = ${HERE}/libusb-${LIBUSB_VERSION}
-LIBUSB_BUILD_DIR = ${HERE}/libusb-build
-
-download:
- wget -O ${TARFILE_LOCAL} ${TARFILE_URL}
-
-unpack:
- rm -rf ${LIBUSB_SRC_DIR}
- tar xfz ${TARFILE_LOCAL}
-
-clean::
- rm -rf ${LIBUSB_SRC_DIR}
-
-configure:
- rm -rf ${LIBUSB_BUILD_DIR}
- mkdir -p ${LIBUSB_BUILD_DIR}
- cd ${LIBUSB_BUILD_DIR} && ${LIBUSB_SRC_DIR}/configure \
- --prefix=${PREFIX} --exec-prefix=${EXEC_PREFIX}
-
-clean::
- rm -rf ${LIBUSB_BUILD_DIR}
-
-build:
- cd ${LIBUSB_BUILD_DIR} && ${MAKE}
-
-install:
- cd ${LIBUSB_BUILD_DIR} && ${MAKE} install
-
-all: unpack configure build install
-
-.PHONY: install
-
-_complain_:
- @echo ""
- @echo "Please try one of these targets: bootstrap, clean, configure, build, install"
- @echo " Or read the makefile and learn about the permutation test targets"
- @echo ""
- @echo "You also might find the download and unpack targets helpful."
- @echo ""
- @exit 1
+++ /dev/null
-# -*- mode: makefile -*-
-#
-default: _complain_
-
-include ./local.uses
-
-
-SRC_DIR ?= $(HERE)/openocd
-BUILD_SUFFIX ?= $(BUILD_MACHINE)
-BUILD_DIR =$(HERE)/openocd.$(BUILD_SUFFIX)
-
-checkout:
- svn co https://svn.berlios.de/svnroot/repos/openocd/trunk openocd
-
-remove.install:
- rm -rf ${INSTALL_DIR}
-
-#========================================
-# Win32 Build Permutations
-# none
-# parport
-# ftd2xx - (ftdichip)
-# libftd
-CONFIG_OPTIONS_win32_none =
-CONFIG_OPTIONS_win32_parport = --enable-parport
-CONFIG_OPTIONS_win32_ftd2xx = --enable-parport --enable-ft2232_ftd2xx --with-ftd2xx-win32-zipdir=$(FTD2XX_WIN32_DIR)
-
-CYGWIN_EASY_PERMUTATIONS += none
-CYGWIN_EASY_PERMUTATIONS += parport
-CYGWIN_EASY_PERMUTATIONS += ftd2xx
-
-MINGW32_EASY_PERMUTATIONS += none
-MINGW32_EASY_PERMUTATIONS += parport
-MINGW32_EASY_PERMUTATIONS += ftd2xx
-
-
-# This is not a possible permutation, it is manual :-(
-# Why? Because "libftdi" installs things into install/include
-# which would efect the 'ftd2xx' win32 build
-CONFIG_OPTIONS_win32_libftdi = --enable-parport --enable-ft2232_libftdi
-
-# Default build for win32... is the ftd2xx type build.
-PERMUTE_win32 ?= ftd2xx
-CONFIG_OPTIONS_win32 ?= $(CONFIG_OPTIONS_win32_$(PERMUTE_win32))
-CONFIG_OPTIONS_cygwin = $(CONFIG_OPTIONS_win32)
-CONFIG_OPTIONS_mingw32 = $(CONFIG_OPTIONS_win32)
-
-#========================================
-# Linux Build Permuatations
-# none
-# parport
-# ft2232_ftd2xx
-# ft2232_libftdi
-CONFIG_OPTIONS_linux_none =
-LINUX_EASY_PERMUTATIONS += none
-
-CONFIG_OPTIONS_linux_parport = --enable-parport
-LINUX_EASY_PERMUTATIONS += parport
-
-CONFIG_OPTIONS_linux_ft2232_libftdi = --enable-parport --enable-ft2232-libftdi
-#this cannot be done as part of the permutations.
-#LINUX_EASY_PERMUTATIONS += ft2232_libftdi
-
-CONFIG_OPTIONS_linux_ft2232_ftd2xx_static = \
- --enable-parport \
- --enable-ft2232-ftd2xx --with-ftd2xx-lib=static --with-ftd2xx-linux-tardir=$(FTD2XX_LINUX_DIR)
-LINUX_EASY_PERMUTATIONS += ft2232_ftd2xx_static
-
-# this is not a possible permutation it is manual :-(
-# why? because it interfers with the other permutations
-# by "installing files" in the $(INSTALL_DIR)
-CONFIG_OPTIONS_linux_ftd2xx_installed = \
- --enable-parport \
- --enable-ft2232-ftd2xx \
- --with-ftd2xx-lib=shared
-
-# The default build permutation is
-PERMUTE_linux ?= ft2232_ftd2xx_static
-CONFIG_OPTIONS_linux = $(CONFIG_OPTIONS_linux_$(PERMUTE_linux))
-
-CONFIG_OPTIONS_darwin=\
- --enable-ftd2232-libftdi
-
-# Which build are we doing?
-CONFIG_OPTIONS := $(CONFIG_OPTIONS_$(BUILD_SYSNAME))
-
-bootstrap:
- cd $(SRC_DIR) && bash ./bootstrap
-
-clean::
- rm -rf $(BUILD_DIR)
-
-ifndef CFLAGS
-_CFLAGS=true
-else
-_CFLAGS=export CFLAGS="${CFLAGS}"
-endif
-
-
-# if this was given... then pass it on
-configure:
- @echo " Build Sysname: $(BUILD_SYSNAME)"
- @echo " Config Options: $(CONFIG_OPTIONS)"
- rm -rf $(BUILD_DIR)
- mkdir $(BUILD_DIR)
- ${_CFLAGS} && \
- cd $(BUILD_DIR) && \
- $(SRC_DIR)/configure \
- --prefix=$(PREFIX) \
- --exec-prefix=$(EXEC_PREFIX) \
- $(CONFIG_OPTIONS)
-
-build:
- cd $(BUILD_DIR) && $(MAKE)
-
-install:
- cd $(BUILD_DIR) && $(MAKE) install
-
-all: configure build install
-
-.PHONY: install
-
-# The "cygwin.libftdi" requires that libftdi be built
-# and installed *PRIOR* to running this target.
-# it is not part of the permutations because ...
-# it interfers with the ftd2xx based builds
-cygwin.libftdi:
- $(MAKE) -f Makefile.openocd bootstrap
- $(MAKE) BUILD_SUFFIX=$@ PERMUTE_win32=libftdi -f Makefile.openocd all
-
-cygwin.easy.permutations: remove.install ${CYGWIN_EASY_PERMUTATIONS:%=_cygwin.%}
-
-_cygwin.%:
- @echo ""
- @echo ""
- @echo "========================================"
- @echo "Permutation Build... $@"
- @echo "========================================"
- @echo ""
- @echo ""
- $(MAKE) PERMUTE_win32=$* BUILD_SUFFIX=cygwin.$* -f Makefile.openocd all
- $(EXEC_PREFIX)/bin/openocd -v
-
-mingw32.easy.permutations: remove.install ${MINGW32_EASY_PERMUTATIONS:%=_mingw32.%}
-
-# I (duane) build openocd-mingw32 via Cygwin.
-# Sadly, the "mingw32" buid for cygwin does not include
-# the required "elf.h" header files... so ...
-# we have them in our own private helper place.
-_mingw32.%:
- @echo ""
- @echo ""
- @echo "========================================"
- @echo "Permutation Build... $@"
- @echo "========================================"
- @echo ""
- @echo ""
- CFLAGS="-mno-cygwin -I$(HERE)/mingw32_help/include" \
- $(MAKE) -f Makefile.openocd all ;\
- $(EXEC_PREFIX)/bin/openocd -v
-
-win32.permutations: mingw32.permutations cygwin.permutations
-
-
-# SMOKE TEST - Build every linux permuation...
-# If "openocd -v" does exit(0) we are good enough.
-
-linux.easy.permutations: remove.install ${LINUX_EASY_PERMUTATIONS:%=_linux.%}
-
-
-_linux.%:
- @echo ""
- @echo ""
- @echo "========================================"
- @echo "Permutation Build... $@"
- @echo "========================================"
- @echo ""
- @echo ""
- $(MAKE) PERMUTE_linux=$* BUILD_SUFFIX=linux.$* -f Makefile.openocd all
- $(EXEC_PREFIX)/bin/openocd -v
-
-linux.ftd2xx_installed:
- ${MAKE} -f Makefile.openocd _$@
-
-linux.ft2232_libftdi:
- ${MAKE} -f Makefile.openocd _$@
-
-_complain_:
- @echo ""
- @echo "Please try one of these targets: bootstrap, clean, configure, build, install"
- @echo " Or read the makefile and learn about the permutation test targets"
- @echo ""
- @exit 1
+++ /dev/null
--- Duane Ellis'es test case for building numerous openocd configurations...
-Dec 26,2008
----------------------------------------------------------------------------
-
-1) Make a directory some where..
-
- mkdir ~/test
-
-2) Change to that directory
-
- cd ~/test
-
-3) Checkout OpenOCD in that directory.
-
- cd ~/test
- svn co https://svn.berlios.de/svnroot/repos/openocd/trunk openocd
-
-4) Copy the "build.test1" directory to the "~/work" directory.
-
-
- cd ~/test
- cp ~/openocd/testing/build.test1/. ~/test/.
-
-5) If needed, download various components.
-
- cd ~/work
- make all.download
-
-
-6) For Linux - type:
-
- cd ~/work
- make linux.buildtest
-
-7) For Cygwin - type:
-
- cd ~/work
- make cygwin.buildtest
+++ /dev/null
-# -*- mode: makefile -*-
-HERE := $(shell pwd)
-
-# Solve problems on systems with DASH.. Grrr...
-SHELL=/bin/bash
-export SHELL
-
-VIRGINS=${HERE}/virgins
-
-# Determine the build platform.
-BUILD_SYSNAME_Linux =linux
-BUILD_SYSNAME_linux =linux
-BUILD_SYSNAME_CYGWIN_NT =cygwin
-BUILD_SYSNAME_MINGW32_NT =mingw32
-BUILD_SYSNAME_Darwin =darwin
-BUILD_SYSNAME_darwin =darwin
-BUILD_SYSNAME :=$(BUILD_SYSNAME_$(shell uname --sysname | cut -d'-' -f1))
-
-# And machine (ie: i686, x86_64, or what)
-BUILD_MACHINE :=$(BUILD_SYSNAME).$(shell uname -m)
-
-
-INSTALL_DIR := $(HERE)/install
-PREFIX := ${INSTALL_DIR}
-EXEC_PREFIX := ${INSTALL_DIR}/${BUILD_MACHINE}
-
-LIBFTDI_VERSION=0.14
-LIBCONFUSE_VERSION=2.5
-
-LIBUSB_VERSION_linux=0.1.12
-
-LIBUSB_VERSION=${LIBUSB_VERSION_${BUILD_SYSNAME}}
-
-FTD2XX_WIN32_VERSION=2.04.14
-FTD2XX_WIN32_DIR = ${HERE}/ftd2xx.win32
-
-FTD2XX_LINUX_VERSION=0.4.16
-FTD2XX_LINUX_DIR = ${HERE}/libftd2xx${FTD2XX_LINUX_VERSION}
-FTD2XX_LINUX_64_DIR = ${HERE}/libftd2xx${FTD2XX_LINUX_VERSION}_x86_64
+++ /dev/null
-/* elf.h
-
- Copyright 2005 Red Hat, Inc.
-
-This file is part of Cygwin.
-
-This software is a copyrighted work licensed under the terms of the
-Cygwin license. Please consult the file "CYGWIN_LICENSE" for
-details. */
-
-#ifndef _ELF_H_
-#define _ELF_H_
-
-#include <stdint.h>
-
-typedef signed char int8_t;
-typedef unsigned char u_int8_t;
-typedef short int16_t;
-typedef unsigned short u_int16_t;
-typedef int int32_t;
-typedef unsigned int u_int32_t;
-typedef long long int64_t;
-typedef unsigned long long u_int64_t;
-typedef int32_t register_t;
-
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-#include <sys/types.h>
-#include <sys/elf32.h>
-#include <sys/elf64.h>
-#include <sys/elf_generic.h>
-#ifdef __cplusplus
-}
-#endif
-
-#endif /*_ELF_H_*/
+++ /dev/null
-/* sys/cdefs.h
-
- Copyright 1998, 2000, 2001 Red Hat, Inc.
-
-This file is part of Cygwin.
-
-This software is a copyrighted work licensed under the terms of the
-Cygwin license. Please consult the file "CYGWIN_LICENSE" for
-details. */
-
-#ifndef _SYS_CDEFS_H
-#define _SYS_CDEFS_H
-#ifdef __cplusplus
-#define __BEGIN_DECLS extern "C" {
-#define __END_DECLS }
-#else
-#define __BEGIN_DECLS
-#define __END_DECLS
-#endif
-#define __P(protos) protos /* full-blown ANSI C */
-#define __CONCAT(__x,__y) __x##__y
-#endif
+++ /dev/null
-/*-
- * Copyright (c) 1996-1998 John D. Polstra.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $FreeBSD: src/sys/sys/elf32.h,v 1.8 2002/05/30 08:32:18 dfr Exp $
- */
-
-#ifndef _SYS_ELF32_H_
-#define _SYS_ELF32_H_ 1
-
-#include <sys/elf_common.h>
-
-/*
- * ELF definitions common to all 32-bit architectures.
- */
-
-typedef u_int32_t Elf32_Addr;
-typedef u_int16_t Elf32_Half;
-typedef u_int32_t Elf32_Off;
-typedef int32_t Elf32_Sword;
-typedef u_int32_t Elf32_Word;
-typedef u_int32_t Elf32_Size;
-typedef Elf32_Off Elf32_Hashelt;
-
-/*
- * ELF header.
- */
-
-typedef struct {
- unsigned char e_ident[EI_NIDENT]; /* File identification. */
- Elf32_Half e_type; /* File type. */
- Elf32_Half e_machine; /* Machine architecture. */
- Elf32_Word e_version; /* ELF format version. */
- Elf32_Addr e_entry; /* Entry point. */
- Elf32_Off e_phoff; /* Program header file offset. */
- Elf32_Off e_shoff; /* Section header file offset. */
- Elf32_Word e_flags; /* Architecture-specific flags. */
- Elf32_Half e_ehsize; /* Size of ELF header in bytes. */
- Elf32_Half e_phentsize; /* Size of program header entry. */
- Elf32_Half e_phnum; /* Number of program header entries. */
- Elf32_Half e_shentsize; /* Size of section header entry. */
- Elf32_Half e_shnum; /* Number of section header entries. */
- Elf32_Half e_shstrndx; /* Section name strings section. */
-} Elf32_Ehdr;
-
-/*
- * Section header.
- */
-
-typedef struct {
- Elf32_Word sh_name; /* Section name (index into the
- section header string table). */
- Elf32_Word sh_type; /* Section type. */
- Elf32_Word sh_flags; /* Section flags. */
- Elf32_Addr sh_addr; /* Address in memory image. */
- Elf32_Off sh_offset; /* Offset in file. */
- Elf32_Size sh_size; /* Size in bytes. */
- Elf32_Word sh_link; /* Index of a related section. */
- Elf32_Word sh_info; /* Depends on section type. */
- Elf32_Size sh_addralign; /* Alignment in bytes. */
- Elf32_Size sh_entsize; /* Size of each entry in section. */
-} Elf32_Shdr;
-
-/*
- * Program header.
- */
-
-typedef struct {
- Elf32_Word p_type; /* Entry type. */
- Elf32_Off p_offset; /* File offset of contents. */
- Elf32_Addr p_vaddr; /* Virtual address in memory image. */
- Elf32_Addr p_paddr; /* Physical address (not used). */
- Elf32_Size p_filesz; /* Size of contents in file. */
- Elf32_Size p_memsz; /* Size of contents in memory. */
- Elf32_Word p_flags; /* Access permission flags. */
- Elf32_Size p_align; /* Alignment in memory and file. */
-} Elf32_Phdr;
-
-/*
- * Dynamic structure. The ".dynamic" section contains an array of them.
- */
-
-typedef struct {
- Elf32_Sword d_tag; /* Entry type. */
- union {
- Elf32_Size d_val; /* Integer value. */
- Elf32_Addr d_ptr; /* Address value. */
- } d_un;
-} Elf32_Dyn;
-
-/*
- * Relocation entries.
- */
-
-/* Relocations that don't need an addend field. */
-typedef struct {
- Elf32_Addr r_offset; /* Location to be relocated. */
- Elf32_Word r_info; /* Relocation type and symbol index. */
-} Elf32_Rel;
-
-/* Relocations that need an addend field. */
-typedef struct {
- Elf32_Addr r_offset; /* Location to be relocated. */
- Elf32_Word r_info; /* Relocation type and symbol index. */
- Elf32_Sword r_addend; /* Addend. */
-} Elf32_Rela;
-
-/* Macros for accessing the fields of r_info. */
-#define ELF32_R_SYM(info) ((info) >> 8)
-#define ELF32_R_TYPE(info) ((unsigned char)(info))
-
-/* Macro for constructing r_info from field values. */
-#define ELF32_R_INFO(sym, type) (((sym) << 8) + (unsigned char)(type))
-
-/*
- * Symbol table entries.
- */
-
-typedef struct {
- Elf32_Word st_name; /* String table index of name. */
- Elf32_Addr st_value; /* Symbol value. */
- Elf32_Size st_size; /* Size of associated object. */
- unsigned char st_info; /* Type and binding information. */
- unsigned char st_other; /* Reserved (not used). */
- Elf32_Half st_shndx; /* Section index of symbol. */
-} Elf32_Sym;
-
-/* Macros for accessing the fields of st_info. */
-#define ELF32_ST_BIND(info) ((info) >> 4)
-#define ELF32_ST_TYPE(info) ((info) & 0xf)
-
-/* Macro for constructing st_info from field values. */
-#define ELF32_ST_INFO(bind, type) (((bind) << 4) + ((type) & 0xf))
-
-#endif /* !_SYS_ELF32_H_ */
+++ /dev/null
-/*-
- * Copyright (c) 1996-1998 John D. Polstra.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $FreeBSD: src/sys/sys/elf64.h,v 1.10 2002/05/30 08:32:18 dfr Exp $
- */
-
-#ifndef _SYS_ELF64_H_
-#define _SYS_ELF64_H_ 1
-
-#include <sys/elf_common.h>
-
-/*
- * ELF definitions common to all 64-bit architectures.
- */
-
-typedef uint64_t Elf64_Addr;
-typedef uint16_t Elf64_Half;
-typedef uint32_t Elf64_Word;
-typedef int32_t Elf64_Sword;
-typedef uint64_t Elf64_Xword;
-typedef int64_t Elf64_Sxword;
-typedef uint64_t Elf64_Off;
-typedef uint16_t Elf64_Section;
-typedef Elf64_Half Elf64_Versym;
-typedef uint16_t Elf64_Quarter;
-
-/*
- * Types of dynamic symbol hash table bucket and chain elements.
- *
- * This is inconsistent among 64 bit architectures, so a machine dependent
- * typedef is required.
- */
-
-#ifdef __alpha__
-typedef Elf64_Off Elf64_Hashelt;
-#else
-typedef Elf64_Half Elf64_Hashelt;
-#endif
-
-/*
- * ELF header.
- */
-
-typedef struct {
- unsigned char e_ident[EI_NIDENT]; /* File identification. */
- Elf64_Half e_type; /* File type. */
- Elf64_Half e_machine; /* Machine architecture. */
- Elf64_Word e_version; /* ELF format version. */
- Elf64_Addr e_entry; /* Entry point. */
- Elf64_Off e_phoff; /* Program header file offset. */
- Elf64_Off e_shoff; /* Section header file offset. */
- Elf64_Word e_flags; /* Architecture-specific flags. */
- Elf64_Half e_ehsize; /* Size of ELF header in bytes. */
- Elf64_Half e_phentsize; /* Size of program header entry. */
- Elf64_Half e_phnum; /* Number of program header entries. */
- Elf64_Half e_shentsize; /* Size of section header entry. */
- Elf64_Half e_shnum; /* Number of section header entries. */
- Elf64_Half e_shstrndx; /* Section name strings section. */
-} Elf64_Ehdr;
-
-/*
- * Section header.
- */
-
-typedef struct {
- Elf64_Word sh_name; /* Section name (index into the
- section header string table). */
- Elf64_Word sh_type; /* Section type. */
- Elf64_Xword sh_flags; /* Section flags. */
- Elf64_Addr sh_addr; /* Address in memory image. */
- Elf64_Off sh_offset; /* Offset in file. */
- Elf64_Xword sh_size; /* Size in bytes. */
- Elf64_Word sh_link; /* Index of a related section. */
- Elf64_Word sh_info; /* Depends on section type. */
- Elf64_Xword sh_addralign; /* Alignment in bytes. */
- Elf64_Xword sh_entsize; /* Size of each entry in section. */
-} Elf64_Shdr;
-
-/*
- * Program header.
- */
-
-typedef struct {
- Elf64_Word p_type; /* Entry type. */
- Elf64_Word p_flags; /* Access permission flags. */
- Elf64_Off p_offset; /* File offset of contents. */
- Elf64_Addr p_vaddr; /* Virtual address in memory image. */
- Elf64_Addr p_paddr; /* Physical address (not used). */
- Elf64_Xword p_filesz; /* Size of contents in file. */
- Elf64_Xword p_memsz; /* Size of contents in memory. */
- Elf64_Xword p_align; /* Alignment in memory and file. */
-} Elf64_Phdr;
-
-/*
- * Dynamic structure. The ".dynamic" section contains an array of them.
- */
-
-typedef struct {
- Elf64_Sxword d_tag; /* Entry type. */
- union {
- Elf64_Xword d_val; /* Integer value. */
- Elf64_Addr d_ptr; /* Address value. */
- } d_un;
-} Elf64_Dyn;
-
-/*
- * Relocation entries.
- */
-
-/* Relocations that don't need an addend field. */
-typedef struct {
- Elf64_Addr r_offset; /* Location to be relocated. */
- Elf64_Xword r_info; /* Relocation type and symbol index. */
-} Elf64_Rel;
-
-/* Relocations that need an addend field. */
-typedef struct {
- Elf64_Addr r_offset; /* Location to be relocated. */
- Elf64_Xword r_info; /* Relocation type and symbol index. */
- Elf64_Sxword r_addend; /* Addend. */
-} Elf64_Rela;
-
-/* Macros for accessing the fields of r_info. */
-#define ELF64_R_SYM(info) ((info) >> 32)
-#define ELF64_R_TYPE(info) ((unsigned char)(info))
-
-/* Macro for constructing r_info from field values. */
-#define ELF64_R_INFO(sym, type) (((sym) << 32) + (unsigned char)(type))
-
-/*
- * Symbol table entries.
- */
-
-typedef struct {
- Elf64_Word st_name; /* String table index of name. */
- unsigned char st_info; /* Type and binding information. */
- unsigned char st_other; /* Reserved (not used). */
- Elf64_Section st_shndx; /* Section index of symbol. */
- Elf64_Addr st_value; /* Symbol value. */
- Elf64_Xword st_size; /* Size of associated object. */
-} Elf64_Sym;
-
-/* Macros for accessing the fields of st_info. */
-#define ELF64_ST_BIND(info) ((info) >> 4)
-#define ELF64_ST_TYPE(info) ((info) & 0xf)
-
-/* Macro for constructing st_info from field values. */
-#define ELF64_ST_INFO(bind, type) (((bind) << 4) + ((type) & 0xf))
-
-#endif /* !_SYS_ELF64_H_ */
+++ /dev/null
-/*-
- * Copyright (c) 1998 John D. Polstra.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $FreeBSD: src/sys/sys/elf_common.h,v 1.15 2004/05/05 02:38:54 marcel Exp $
- */
-
-#ifndef _SYS_ELF_COMMON_H_
-#define _SYS_ELF_COMMON_H_ 1
-
-/*
- * ELF definitions that are independent of architecture or word size.
- */
-
-/*
- * Note header. The ".note" section contains an array of notes. Each
- * begins with this header, aligned to a word boundary. Immediately
- * following the note header is n_namesz bytes of name, padded to the
- * next word boundary. Then comes n_descsz bytes of descriptor, again
- * padded to a word boundary. The values of n_namesz and n_descsz do
- * not include the padding.
- */
-
-typedef struct {
- u_int32_t n_namesz; /* Length of name. */
- u_int32_t n_descsz; /* Length of descriptor. */
- u_int32_t n_type; /* Type of this note. */
-} Elf_Note;
-
-/* Indexes into the e_ident array. Keep synced with
- http://www.sco.com/developer/gabi/ch4.eheader.html */
-#define EI_MAG0 0 /* Magic number, byte 0. */
-#define EI_MAG1 1 /* Magic number, byte 1. */
-#define EI_MAG2 2 /* Magic number, byte 2. */
-#define EI_MAG3 3 /* Magic number, byte 3. */
-#define EI_CLASS 4 /* Class of machine. */
-#define EI_DATA 5 /* Data format. */
-#define EI_VERSION 6 /* ELF format version. */
-#define EI_OSABI 7 /* Operating system / ABI identification */
-#define EI_ABIVERSION 8 /* ABI version */
-#define OLD_EI_BRAND 8 /* Start of architecture identification. */
-#define EI_PAD 9 /* Start of padding (per SVR4 ABI). */
-#define EI_NIDENT 16 /* Size of e_ident array. */
-
-/* Values for the magic number bytes. */
-#define ELFMAG0 0x7f
-#define ELFMAG1 'E'
-#define ELFMAG2 'L'
-#define ELFMAG3 'F'
-#define ELFMAG "\177ELF" /* magic string */
-#define SELFMAG 4 /* magic string size */
-
-/* Values for e_ident[EI_VERSION] and e_version. */
-#define EV_NONE 0
-#define EV_CURRENT 1
-
-/* Values for e_ident[EI_CLASS]. */
-#define ELFCLASSNONE 0 /* Unknown class. */
-#define ELFCLASS32 1 /* 32-bit architecture. */
-#define ELFCLASS64 2 /* 64-bit architecture. */
-
-/* Values for e_ident[EI_DATA]. */
-#define ELFDATANONE 0 /* Unknown data format. */
-#define ELFDATA2LSB 1 /* 2's complement little-endian. */
-#define ELFDATA2MSB 2 /* 2's complement big-endian. */
-
-/* Values for e_ident[EI_OSABI]. */
-#define ELFOSABI_SYSV 0 /* UNIX System V ABI */
-#define ELFOSABI_NONE ELFOSABI_SYSV /* symbol used in old spec */
-#define ELFOSABI_HPUX 1 /* HP-UX operating system */
-#define ELFOSABI_NETBSD 2 /* NetBSD */
-#define ELFOSABI_LINUX 3 /* GNU/Linux */
-#define ELFOSABI_HURD 4 /* GNU/Hurd */
-#define ELFOSABI_86OPEN 5 /* 86Open common IA32 ABI */
-#define ELFOSABI_SOLARIS 6 /* Solaris */
-#define ELFOSABI_MONTEREY 7 /* Monterey */
-#define ELFOSABI_IRIX 8 /* IRIX */
-#define ELFOSABI_FREEBSD 9 /* FreeBSD */
-#define ELFOSABI_TRU64 10 /* TRU64 UNIX */
-#define ELFOSABI_MODESTO 11 /* Novell Modesto */
-#define ELFOSABI_OPENBSD 12 /* OpenBSD */
-#define ELFOSABI_ARM 97 /* ARM */
-#define ELFOSABI_STANDALONE 255 /* Standalone (embedded) application */
-
-/* e_ident */
-#define IS_ELF(ehdr) ((ehdr).e_ident[EI_MAG0] == ELFMAG0 && \
- (ehdr).e_ident[EI_MAG1] == ELFMAG1 && \
- (ehdr).e_ident[EI_MAG2] == ELFMAG2 && \
- (ehdr).e_ident[EI_MAG3] == ELFMAG3)
-
-/* Values for e_type. */
-#define ET_NONE 0 /* Unknown type. */
-#define ET_REL 1 /* Relocatable. */
-#define ET_EXEC 2 /* Executable. */
-#define ET_DYN 3 /* Shared object. */
-#define ET_CORE 4 /* Core file. */
-
-/* Values for e_machine. */
-#define EM_NONE 0 /* Unknown machine. */
-#define EM_M32 1 /* AT&T WE32100. */
-#define EM_SPARC 2 /* Sun SPARC. */
-#define EM_386 3 /* Intel i386. */
-#define EM_68K 4 /* Motorola 68000. */
-#define EM_88K 5 /* Motorola 88000. */
-#define EM_486 6 /* Intel i486. */
-#define EM_860 7 /* Intel i860. */
-#define EM_MIPS 8 /* MIPS R3000 Big-Endian only */
-
-/* Extensions. This list is not complete. */
-#define EM_S370 9 /* IBM System/370 */
-#define EM_MIPS_RS4_BE 10 /* MIPS R4000 Big-Endian */ /* Depreciated */
-#define EM_PARISC 15 /* HPPA */
-#define EM_SPARC32PLUS 18 /* SPARC v8plus */
-#define EM_PPC 20 /* PowerPC 32-bit */
-#define EM_PPC64 21 /* PowerPC 64-bit */
-#define EM_ARM 40 /* ARM */
-#define EM_SPARCV9 43 /* SPARC v9 64-bit */
-#define EM_IA_64 50 /* Intel IA-64 Processor */
-#define EM_X86_64 62 /* Advanced Micro Devices x86-64 */
-#define EM_ALPHA 0x9026 /* Alpha (written in the absence of an ABI */
-
-/* Special section indexes. */
-#define SHN_UNDEF 0 /* Undefined, missing, irrelevant. */
-#define SHN_LORESERVE 0xff00 /* First of reserved range. */
-#define SHN_LOPROC 0xff00 /* First processor-specific. */
-#define SHN_HIPROC 0xff1f /* Last processor-specific. */
-#define SHN_ABS 0xfff1 /* Absolute values. */
-#define SHN_COMMON 0xfff2 /* Common data. */
-#define SHN_HIRESERVE 0xffff /* Last of reserved range. */
-
-/* sh_type */
-#define SHT_NULL 0 /* inactive */
-#define SHT_PROGBITS 1 /* program defined information */
-#define SHT_SYMTAB 2 /* symbol table section */
-#define SHT_STRTAB 3 /* string table section */
-#define SHT_RELA 4 /* relocation section with addends */
-#define SHT_HASH 5 /* symbol hash table section */
-#define SHT_DYNAMIC 6 /* dynamic section */
-#define SHT_NOTE 7 /* note section */
-#define SHT_NOBITS 8 /* no space section */
-#define SHT_REL 9 /* relocation section - no addends */
-#define SHT_SHLIB 10 /* reserved - purpose unknown */
-#define SHT_DYNSYM 11 /* dynamic symbol table section */
-#define SHT_NUM 12 /* number of section types */
-#define SHT_LOOS 0x60000000 /* First of OS specific semantics */
-#define SHT_HIOS 0x6fffffff /* Last of OS specific semantics */
-#define SHT_LOPROC 0x70000000 /* reserved range for processor */
-#define SHT_HIPROC 0x7fffffff /* specific section header types */
-#define SHT_LOUSER 0x80000000 /* reserved range for application */
-#define SHT_HIUSER 0xffffffff /* specific indexes */
-
-/* Flags for sh_flags. */
-#define SHF_WRITE 0x1 /* Section contains writable data. */
-#define SHF_ALLOC 0x2 /* Section occupies memory. */
-#define SHF_EXECINSTR 0x4 /* Section contains instructions. */
-#define SHF_TLS 0x400 /* Section contains TLS data. */
-#define SHF_MASKPROC 0xf0000000 /* Reserved for processor-specific. */
-
-/* Values for p_type. */
-#define PT_NULL 0 /* Unused entry. */
-#define PT_LOAD 1 /* Loadable segment. */
-#define PT_DYNAMIC 2 /* Dynamic linking information segment. */
-#define PT_INTERP 3 /* Pathname of interpreter. */
-#define PT_NOTE 4 /* Auxiliary information. */
-#define PT_SHLIB 5 /* Reserved (not used). */
-#define PT_PHDR 6 /* Location of program header itself. */
-#define PT_TLS 7 /* Thread local storage segment */
-
-#define PT_COUNT 8 /* Number of defined p_type values. */
-
-#define PT_LOOS 0x60000000 /* OS-specific */
-#define PT_HIOS 0x6fffffff /* OS-specific */
-#define PT_LOPROC 0x70000000 /* First processor-specific type. */
-#define PT_HIPROC 0x7fffffff /* Last processor-specific type. */
-
-/* Values for p_flags. */
-#define PF_X 0x1 /* Executable. */
-#define PF_W 0x2 /* Writable. */
-#define PF_R 0x4 /* Readable. */
-
-/* Values for d_tag. */
-#define DT_NULL 0 /* Terminating entry. */
-#define DT_NEEDED 1 /* String table offset of a needed shared
- library. */
-#define DT_PLTRELSZ 2 /* Total size in bytes of PLT relocations. */
-#define DT_PLTGOT 3 /* Processor-dependent address. */
-#define DT_HASH 4 /* Address of symbol hash table. */
-#define DT_STRTAB 5 /* Address of string table. */
-#define DT_SYMTAB 6 /* Address of symbol table. */
-#define DT_RELA 7 /* Address of ElfNN_Rela relocations. */
-#define DT_RELASZ 8 /* Total size of ElfNN_Rela relocations. */
-#define DT_RELAENT 9 /* Size of each ElfNN_Rela relocation entry. */
-#define DT_STRSZ 10 /* Size of string table. */
-#define DT_SYMENT 11 /* Size of each symbol table entry. */
-#define DT_INIT 12 /* Address of initialization function. */
-#define DT_FINI 13 /* Address of finalization function. */
-#define DT_SONAME 14 /* String table offset of shared object
- name. */
-#define DT_RPATH 15 /* String table offset of library path. [sup] */
-#define DT_SYMBOLIC 16 /* Indicates "symbolic" linking. [sup] */
-#define DT_REL 17 /* Address of ElfNN_Rel relocations. */
-#define DT_RELSZ 18 /* Total size of ElfNN_Rel relocations. */
-#define DT_RELENT 19 /* Size of each ElfNN_Rel relocation. */
-#define DT_PLTREL 20 /* Type of relocation used for PLT. */
-#define DT_DEBUG 21 /* Reserved (not used). */
-#define DT_TEXTREL 22 /* Indicates there may be relocations in
- non-writable segments. [sup] */
-#define DT_JMPREL 23 /* Address of PLT relocations. */
-#define DT_BIND_NOW 24 /* [sup] */
-#define DT_INIT_ARRAY 25 /* Address of the array of pointers to
- initialization functions */
-#define DT_FINI_ARRAY 26 /* Address of the array of pointers to
- termination functions */
-#define DT_INIT_ARRAYSZ 27 /* Size in bytes of the array of
- initialization functions. */
-#define DT_FINI_ARRAYSZ 28 /* Size in bytes of the array of
- terminationfunctions. */
-#define DT_RUNPATH 29 /* String table offset of a null-terminated
- library search path string. */
-#define DT_FLAGS 30 /* Object specific flag values. */
-#define DT_ENCODING 32 /* Values greater than or equal to DT_ENCODING
- and less than DT_LOOS follow the rules for
- the interpretation of the d_un union
- as follows: even == 'd_ptr', even == 'd_val'
- or none */
-#define DT_PREINIT_ARRAY 32 /* Address of the array of pointers to
- pre-initialization functions. */
-#define DT_PREINIT_ARRAYSZ 33 /* Size in bytes of the array of
- pre-initialization functions. */
-
-#define DT_COUNT 33 /* Number of defined d_tag values. */
-
-#define DT_LOOS 0x6000000d /* First OS-specific */
-#define DT_HIOS 0x6fff0000 /* Last OS-specific */
-#define DT_LOPROC 0x70000000 /* First processor-specific type. */
-#define DT_HIPROC 0x7fffffff /* Last processor-specific type. */
-
-/* Values for DT_FLAGS */
-#define DF_ORIGIN 0x0001 /* Indicates that the object being loaded may
- make reference to the $ORIGIN substitution
- string */
-#define DF_SYMBOLIC 0x0002 /* Indicates "symbolic" linking. */
-#define DF_TEXTREL 0x0004 /* Indicates there may be relocations in
- non-writable segments. */
-#define DF_BIND_NOW 0x0008 /* Indicates that the dynamic linker should
- process all relocations for the object
- containing this entry before transferring
- control to the program. */
-#define DF_STATIC_TLS 0x0010 /* Indicates that the shared object or
- executable contains code using a static
- thread-local storage scheme. */
-
-/* Values for n_type. Used in core files. */
-#define NT_PRSTATUS 1 /* Process status. */
-#define NT_FPREGSET 2 /* Floating point registers. */
-#define NT_PRPSINFO 3 /* Process state info. */
-
-/* Symbol Binding - ELFNN_ST_BIND - st_info */
-#define STB_LOCAL 0 /* Local symbol */
-#define STB_GLOBAL 1 /* Global symbol */
-#define STB_WEAK 2 /* like global - lower precedence */
-#define STB_LOPROC 13 /* reserved range for processor */
-#define STB_HIPROC 15 /* specific symbol bindings */
-
-/* Symbol type - ELFNN_ST_TYPE - st_info */
-#define STT_NOTYPE 0 /* Unspecified type. */
-#define STT_OBJECT 1 /* Data object. */
-#define STT_FUNC 2 /* Function. */
-#define STT_SECTION 3 /* Section. */
-#define STT_FILE 4 /* Source file. */
-#define STT_TLS 6 /* TLS object. */
-#define STT_LOPROC 13 /* reserved range for processor */
-#define STT_HIPROC 15 /* specific symbol types */
-
-/* Special symbol table indexes. */
-#define STN_UNDEF 0 /* Undefined symbol index. */
-
-#endif /* !_SYS_ELF_COMMON_H_ */
+++ /dev/null
-/*-
- * Copyright (c) 1998 John D. Polstra.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $FreeBSD: src/sys/sys/elf_generic.h,v 1.6 2002/07/20 02:56:11 peter Exp $
- */
-
-#ifndef _SYS_ELF_GENERIC_H_
-#define _SYS_ELF_GENERIC_H_ 1
-
-#include <sys/cdefs.h>
-
-/*
- * Definitions of generic ELF names which relieve applications from
- * needing to know the word size.
- */
-
-#ifndef __ELF_WORD_SIZE
-# define __ELF_WORD_SIZE 32
-#endif
-
-#if __ELF_WORD_SIZE != 32 && __ELF_WORD_SIZE != 64
-#error "__ELF_WORD_SIZE must be defined as 32 or 64"
-#endif
-
-#define ELF_CLASS __CONCAT(ELFCLASS,__ELF_WORD_SIZE)
-
-#if BYTE_ORDER == LITTLE_ENDIAN
-#define ELF_DATA ELFDATA2LSB
-#elif BYTE_ORDER == BIG_ENDIAN
-#define ELF_DATA ELFDATA2MSB
-#else
-#error "Unknown byte order"
-#endif
-
-#if __ELF_WORD_SIZE == 32
-#define __elfN(x) elf32_##x
-#define __ElfN(x) Elf32_##x
-#define __ELFN(x) ELF32_##x
-#else
-#define __elfN(x) elf364_##x
-#define __ElfN(x) Elf364_##x
-#define __ELFN(x) ELF364_##x
-#endif
-#define __ElfType(x) typedef __ElfN(x) Elf_##x
-
-#define FOO
-__ElfType(Addr);
-__ElfType(Half);
-__ElfType(Off);
-__ElfType(Sword);
-__ElfType(Word);
-__ElfType(Size);
-__ElfType(Hashelt);
-__ElfType(Ehdr);
-__ElfType(Shdr);
-__ElfType(Phdr);
-__ElfType(Dyn);
-__ElfType(Rel);
-__ElfType(Rela);
-__ElfType(Sym);
-
-#define ELF_R_SYM __ELFN(R_SYM)
-#define ELF_R_TYPE __ELFN(R_TYPE)
-#define ELF_R_INFO __ELFN(R_INFO)
-#define ELF_ST_BIND __ELFN(ST_BIND)
-#define ELF_ST_TYPE __ELFN(ST_TYPE)
-#define ELF_ST_INFO __ELFN(ST_INFO)
-
-#endif /* !_SYS_ELF_GENERIC_H_ */
+++ /dev/null
-# -*- mode: makefile -*-
-#========================================
-# DO NOT DELETE THE LINE BELOW
-_default: default
-# DO NOT DELETE THE LINE_ABOVE
-#========================================
-
-#========================================
-#
-# There are no user configurable options here.
-#
-# All user configurable options are in local.uses
-#
-include ./local.uses
-#
-#========================================
-
-#========================================
-# This is the USB driver for the FTDI2XX chips.
-# It is a "closed" solution from FTDICHIP.COM
-# Some claim it is faster then the open/free
-# solution: win32-libusb+libftdi.
-#
-ftd2xx.download:
- mkdir -p ${VIRGINS}
- wget -O ${FTD2XX_ZIPFILE_LOCAL} \
- ${FTD2XX_ZIPFILE_URL}
-
-ftd2xx.unpack:
- rm -rf ${FTD2XX_WIN32_DIR}
- mkdir -p ${FTD2XX_WIN32_DIR}
- cd ${FTD2XX_WIN32_DIR} && unzip \
- ${FTD2XX_ZIPFILE_LOCAL}
-
-ftd2xx.build:
- @echo "Nothing to do for: $@"
-
-ftd2xx.configure:
- @echo "Nothing to do for: $@"
-
-ftd2xx.install:
- @echo "Nothing to do for: $@"
-
-clean::
- rm -rf ${FTD2XX_WIN32_DIR}
-
-ftd2xx.all: ftd2xx.unpack ftd2xx.configure \
- ftd2xx.build ftd2xx.install
-
-
-#========================================-
-# LIBFTDI - requires LIBCONFUSE..
-# So we handle it here :-(
-
-libconfuse.download:
- mkdir -p virgins
- wget -O ${LIBCONFUSE_TARFILE_LOCAL} \
- ${LIBCONFUSE_TARFILE_URL}
-
-libconfuse.unpack:
- tar xfz ${LIBCONFUSE_TARFILE_LOCAL}
-
-clean::
- rm -rf ${LIBCONFUSE_SRC_DIR}
-
-libconfuse.configure:
- rm -rf ${LIBCONFUSE_BUILD_DIR}
- mkdir -p ${LIBCONFUSE_BUILD_DIR}
- cd ${LIBCONFUSE_BUILD_DIR} && \
- ${LIBCONFUSE_SRC_DIR}/configure \
- --prefix=${PREFIX}
-
-clean::
- rm -rf ${LIBCONFUSE_BUILD_DIR}
-
-libconfuse.build:
- cd ${LIBCONFUSE_BUILD_DIR} && ${MAKE}
-
-libconfuse.install:
- cd ${LIBCONFUSE_BUILD_DIR} && ${MAKE} install
-
-libconfuse.all: libconfuse.unpack libconfuse.configure \
- libconfuse.build libconfuse.install
-
-#========================================
-# LIBFTDI - the open source (and free)
-# alternative to (closed) FTD2XX drivers.
-
-libftdi.download:
- mkdir -p virgins
- wget -O ${LIBFTDI_TARFILE_LOCAL} \
- ${LIBFTDI_TARFILE_URL}
-
-libftdi.unpack:
- tar xfz ${LIBFTDI_TARFILE_LOCAL}
-
-clean::
- rm -rf ${LIBFTDI_SRC_DIR}
-
-libftdi.configure:
- rm -rf ${LIBFTDI_BUILD_DIR}
- mkdir -p ${LIBFTDI_BUILD_DIR}
- cd ${LIBFTDI_BUILD_DIR} && \
- ${LIBFTDI_SRC_DIR}/configure \
- --prefix=${PREFIX}
-
-clean::
- rm -rf ${LIBFTDI_BUILD_DIR}
-
-libftdi.build:
- cd ${LIBFTDI_BUILD_DIR} && ${MAKE}
-
-libftdi.install:
- cd ${LIBFTDI_BUILD_DIR} && ${MAKE} install
-
-libftdi.all: libftdi.unpack libftdi.configure \
- libftdi.build libftdi.install
-
-#========================================
-# Openocd...
-
-openocd.bootstrap:
- cd ${OPENOCD_SRC_DIR} && bash ./bootstrap
-
-openocd.configure:
- rm -rf ${OPENOCD_BUILD_DIR}
- mkdir -p ${OPENOCD_BUILD_DIR}
- cd ${OPENOCD_BUILD_DIR} && ${OPENOCD_SRC_DIR}/configure \
- --prefix=${INSTALL_DIR} \
- ${OPENOCD_CONFIG_OPTIONS}
-
-openocd.build:
- cd ${OPENOCD_BUILD_DIR} && ${MAKE}
-
-openocd.docs:
- cd ${OPENOCD_BUILD_DIR}/docs && ${MAKE}
-
-openocd.docs.pdf:
- cd ${OPENOCD_BUILD_DIR}/docs && ${MAKE} pdf
-
-openocd.docs.html:
- cd ${OPENOCD_BUILD_DIR}/docs && ${MAKE} html
-
-# fixme:
-# need to add a "make one huge html file target"
-
-openocd.install:
- cd ${OPENOCD_BUILD_DIR} && ${MAKE} install
-
-#========================================
-# The world...
-
-# Manual step.
-download.all: \
- ftd2xx.download \
- libconfuse.download \
- libftdi.download
-
-ifeq (x"${FT2232_DRIVER}",x"ftd2xx")
-prebuild: ftd2xx.all
-endif
-
-ifeq (x"${FT2232_DRIVER}",x"libftdi")
-prebuild: libconfuse.all libftdi.all
-endif
-
-remake: \
- openocd.bootstrap \
- openocd.configure \
- openocd.build \
- openocd.install
-
-initial.build : download.all prebuild remake
-
-all:
- @echo ""
- @echo " This makefile does not support an 'all' target"
- @echo ""
- @echo " If this is your *FIRST* time building... "
- @echo " Then use this command: \"make initial.build\""
- @echo ""
- @echo " The \"default\" target is for openocd developers"
- @echo " and rebuilds openocd completely.."
- @echo ""
-
-default:
- test -d ${OPENOCD_SRC_DIR} || (echo "Where is: The OPENOCD source?"; exit 1)
- ${MAKE} remake
-
-whatis_%:
- @echo ""
- @echo "Makevariable: $* => ${${*}}"
- @echo ""
+++ /dev/null
-
-This makefile is how I Duane Ellis (openocd@duaneellis.com) builds
-openocd test purposes on Cygwin. I have included it here so others
-might also make use of the same configuration that I use to develop
-Openocd.
-
---Duane Ellis
-
-To make use of it do the following:
-
-(1) Check out openocd in the standard way.
-
-For example - in cygwin, type this:
-
- bash$ mkdir -p /home/duane/test
- bash$ cd /home/duane/test
- bash$ svn co https://svn.berlios.de/svnroot/repos/openocd/trunk openocd
-
-(2) COPY this folder "right above" where you have OpenOCD.
-
- bash$ cd /home/duane/test
- bash$ cp ./openocd/testing/build.test2/* /home/duane/test/.
-
-(3) OPTIONALLY
-
- You might want to review the file "local.uses"
- Change options and so forth at the top of the file.
-
-(4) Initially, you need to download some additional files.
- These include "libftdi", "libconfuse", and the ftd2xx drivers.
-
-(5) You also need to build the supporting libraries and install them
- (They are installed "locally" only)
-
- Type this command:
-
- bash$ cd /home/duane/test
-
- bash$ make initial.build
-
- which: (1) downloads files
- (2) builds the libs
- (3) builds OpenOCD
-
-(6) As you hack upon OpenOCD... to rebuild OpenOCD...
-
- bash$ cd /home/duane/test
-
- bash$ make remake
-
- which: (1) re-bootstraps
- (2) re-configures
- (3) re-builds
- (4) re-installs.
-
-=======
-**END**
-=======
+++ /dev/null
-# -*- mode: makefile -*-
-#========================================
-# DO NOT REMOVE THE LINE BELOW
-HERE := $(shell pwd)
-# DO NOT REMOVE THE LINE ABOVE
-#========================================
-
-# These are common CYGWIN build settings.
-# Comment out things you do not want.
-# Or unComment things you want.
-
-# PCs always have printer ports...
-X86_PRINTER_PORT ?= y
-
-# Chose *ONE* of these three solutions.
-#FTD2232_DRIVER = none
-FT2232_DRIVER = ftd2xx
-#FT2232_DRIVER = libftdi
-
-# Do you have "libusb" installed?
-ifeq (x"${FT2232_DRIVER}",x"libftdi")
-# With LIBFTDI... LIBUSB is manditory.
-USE_LIBUSB = y
-endif
-
-# By default... we assume libusb not present.
-USE_LIBUSB ?= n
-
-#========================================
-# DO NOT EDIT SETTINGS BELOW THIS LINE
-#========================================
-
-
-
-#========================================
-# House keeping...
-
-# Solve problems on systems with DASH.. Grrr...
-SHELL=/bin/bash
-export SHELL
-
-VIRGINS ?= ${HERE}/virgins
-INSTALL_DIR ?= $(HERE)/install
-PREFIX ?= ${INSTALL_DIR}
-
-# Determine the build platform.
-BUILD_SYSNAME_Linux =linux
-BUILD_SYSNAME_linux =linux
-BUILD_SYSNAME_CYGWIN_NT =cygwin
-BUILD_SYSNAME_MINGW32_NT =mingw32
-BUILD_SYSNAME_Darwin =darwin
-BUILD_SYSNAME_darwin =darwin
-BUILD_SYSNAME :=$(BUILD_SYSNAME_$(shell uname --sysname | cut -d'-' -f1))
-
-# And machine (ie: i686, x86_64, or what ever)
-BUILD_MACHINE :=$(BUILD_SYSNAME).$(shell uname -m)
-
-
-#========================================
-#
-
-FTD2XX_LINUX_VERSION=0.4.16
-FTD2XX_LINUX_DIR = ${HERE}/libftd2xx${FTD2XX_LINUX_VERSION}
-FTD2XX_LINUX_64_DIR = ${HERE}/libftd2xx${FTD2XX_LINUX_VERSION}_x86_64
-
-
-# Wiggler type interfaces are here.
-OPENOCD_CONFIG_OPTIONS_printer_y += --enable-parport
-OPENOCD_CONFIG_OPTIONS_printer_y += --enable-parport-giveio
-OPENOCD_CONFIG_OPTIONS_printer_y += --enable-gw16012
-OPENOCD_CONFIG_OPTIONS_printer_y += --enable-parport-giveio
-OPENOCD_CONFIG_OPTIONS_printer_y += --enable-amtjtagaccel
-
-
-# FTD2XX only supports these
-OPENOCD_CONFIG_OPTIONS_ft2232_none =
-OPENOCD_CONFIG_OPTIONS_ft2232_ftd2xx = --enable-ft2232_ftd2xx --enable-presto_ftd2xx --with-ftd2xx-win32-zipdir=${FTD2XX_WIN32_DIR}
-OPENOCD_CONFIG_OPTIONS_ft2232_libftdi = --enable-ft2232_libftdi --enable-presto_libftdi
-
-# LIBUSB - adds support for these.
-OPENOCD_CONFIG_OPTIONS_libusb_y += --enable-jlink
-OPENOCD_CONFIG_OPTIONS_libusb_y += --enable-usbprog
-OPENOCD_CONFIG_OPTIONS_libusb_y += --enable-rlink
-OPENOCD_CONFIG_OPTIONS_libusb_y += --enable-vsllink
-OPENOCD_CONFIG_OPTIONS_libusb_y += --enable-usbprog
-
-#========================================
-# EXPLICITY NOT SUPPORTED INTERFACES
-#
-# zy1000.c
-# This is a standalone hardware box
-# it is *NOT* a cygwin thing.
-#
-# at91rm9200.c
-# This is a uC/Linux (or linux) that
-# runs uC/Linux and uses the gpio pins
-# to bit-bang JTAG stuff.
-#
-# ep93xx.c
-# Just like at91rm9200 - different chip.
-
-#========================================
-# Build OPENOCD config options...
-# Always enable "dummy"
-OPENOCD_CONFIG_OPTIONS += --enable-dummy
-#
-# Today: Cannot enable 'oocd_trace' on cygwin.
-# it assumes/uses termios functions like
-# cfmakeraw() which do not exist on cygwin.
-#
-#OPENOCD_CONFIG_OPTIONS += --enable-oocd-trace
-#
-# Add printer options..
-OPENOCD_CONFIG_OPTIONS += ${OPENOCD_CONFIG_OPTIONS_printer_${X86_PRINTER_PORT}}
-
-# Add the FTD2232 based options.
-OPENOCD_CONFIG_OPTIONS += ${OPENOCD_CONFIG_OPTIONS_ft2232_${FT2232_DRIVER}}
-
-# Add LIBUSB based options.
-OPENOCD_CONFIG_OPTIONS += ${OPENOCD_CONFIG_OPTIONS_libusb_${USE_LIBUSB}}
-
-
-#========================================
-# WARNING... the file on the ftdi chip site has a SPACE in the filename GRRR!!!
-# We fix that with the "-O" option to wget.
-FTD2XX_WIN32_VERSION=2.04.14
-FTD2XX_WIN32_DIR = ${HERE}/ftd2xx.win32
-
-FTD2XX_ZIPFILE_LOCAL=${VIRGINS}/cdm.${FTD2XX_WIN32_VERSION}.zip
-# Damn thing has a space in the F-ing filename!
-FTD2XX_ZIPFILE_URL ="http://www.ftdichip.com/Drivers/CDM/CDM ${FTD2XX_WIN32_VERSION}.zip"
-
-
-#========================================
-# LIBCONFUSE - used by LIBFTDI..
-LIBCONFUSE_VERSION=2.5
-LIBCONFUSE_TARFILE_LOCAL=${VIRGINS}/confuse-${LIBCONFUSE_VERSION}.tar.gz
-LIBCONFUSE_TARFILE_URL =http://www.intra2net.com/de/produkte/opensource/ftdi/TGZ/confuse-${LIBCONFUSE_VERSION}.tar.gz
-
-LIBCONFUSE_SRC_DIR =${HERE}/confuse-${LIBCONFUSE_VERSION}
-LIBCONFUSE_BUILD_DIR =${HERE}/confuse-build
-
-
-#========================================
-# LIBFTDI... (which uses libusb, and libconfuse)
-LIBFTDI_VERSION=0.14
-LIBFTDI_TARFILE_LOCAL = ${VIRGINS}/libftdi-${LIBFTDI_VERSION}.tar.gz
-LIBFTDI_TARFILE_URL = http://www.intra2net.com/de/produkte/opensource/ftdi/TGZ/libftdi-${LIBFTDI_VERSION}.tar.gz
-
-LIBFTDI_SRC_DIR = ${HERE}/libftdi-${LIBFTDI_VERSION}
-LIBFTDI_BUILD_DIR= ${HERE}/libftdi-build
-
-#========================================
-# Finally - OpenOCD...
-#
-OPENOCD_BUILD_DIR =${HERE}/openocd-build
-OPENOCD_SRC_DIR =${HERE}/openocd
-
-#========================================
-# END ..
-#========================================
Code Review / openocd.git / commitdiff