summary |
shortlog |
log |
commit | commitdiff |
review |
tree
raw |
patch |
inline | side by side (from parent 1:
45d90aa)
- TDI/DO is not pin 2 and in fact, we don't even need to mention which
pin number it is. "TDI/DO pin" is descriptive enough.
- FT2232D link didn't work anymore. It could have been updated to the
current working FT2232D link but changed to link the FT2232H instead
which is the latest generation and the most commonly used these days.
- Taking advantage of the change, link to the MPSSE document updated.
It still worked but through a redirection, so updated just in case the
redirection stops working.
Change-Id: Ia7d01bbcac2158026831edb010a6b50f58351e42
Signed-off-by: Diego Herranz <diegoherranz@diegoherranz.com>
Reviewed-on: http://openocd.zylin.com/4908
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
*
* This code uses information contained in the MPSSE specification which was
* found here:
*
* This code uses information contained in the MPSSE specification which was
* found here:
- * http://www.ftdichip.com/Documents/AppNotes/AN2232C-01_MPSSE_Cmnd.pdf
+ * https://www.ftdichip.com/Support/Documents/AppNotes/AN2232C-01_MPSSE_Cmnd.pdf
* Hereafter this is called the "MPSSE Spec".
*
* Hereafter this is called the "MPSSE Spec".
*
- * The datasheet for the ftdichip.com's FT2232D part is here:
- * http://www.ftdichip.com/Documents/DataSheets/DS_FT2232D.pdf
+ * The datasheet for the ftdichip.com's FT2232H part is here:
+ * https://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT2232H.pdf
*
* Also note the issue with code 0x4b (clock data to TMS) noted in
* http://developer.intra2net.com/mailarchive/html/libftdi/2009/msg00292.html
*
* Also note the issue with code 0x4b (clock data to TMS) noted in
* http://developer.intra2net.com/mailarchive/html/libftdi/2009/msg00292.html
if (oe->data_mask)
ftdi_set_signal(oe, enable ? '1' : '0');
else {
if (oe->data_mask)
ftdi_set_signal(oe, enable ? '1' : '0');
else {
- /* Sets TDI/DO pin (pin 2) to input during rx when both pins are connected
+ /* Sets TDI/DO pin to input during rx when both pins are connected
to SWDIO */
if (enable)
direction |= jtag_direction_init & 0x0002U;
to SWDIO */
if (enable)
direction |= jtag_direction_init & 0x0002U;
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)