LOG_WARNING("No working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
- ;
/* write algorithm code to working area */
retval = target_write_buffer(target, write_algorithm->address,
goto cleanup;
}
}
- ;
/* setup algo registers */
init_reg_param(®_params[0], "r0", 32, PARAM_OUT);
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
}
- ;
init_reg_param(®_params[0], "r4", 32, PARAM_OUT);
init_reg_param(®_params[1], "r5", 32, PARAM_OUT);
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
}
- ;
init_reg_param(®_params[0], "r0", 32, PARAM_OUT);
init_reg_param(®_params[1], "r1", 32, PARAM_OUT);
&write_algorithm) != ERROR_OK) {
LOG_WARNING("no working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- };
+ }
ret = target_write_buffer(target, write_algorithm->address,
sizeof(efm32x_flash_write_code), efm32x_flash_write_code);
LOG_WARNING("no large enough working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
- };
+ }
init_reg_param(®_params[0], "r0", 32, PARAM_IN_OUT); /* flash base (in), status (out) */
init_reg_param(®_params[1], "r1", 32, PARAM_OUT); /* count (word-32bit) */
LOG_WARNING("no working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
- ;
retval = target_write_buffer(target, write_algorithm->address,
sizeof(em357_flash_write_code), em357_flash_write_code);
break;
}
}
- ;
if (warea) {
struct reg_param reg_params[5];
" a working area > %zdB in order to write to SPIFI flash.",
sizeof(lpcspifi_flash_write_code));
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- };
+ }
retval = target_write_buffer(target, write_algorithm->address,
sizeof(lpcspifi_flash_write_code),
if (target_alloc_working_area(target, fifo_size, &fifo) != ERROR_OK) {
target_free_working_area(target, write_algorithm);
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- };
+ }
armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
armv7m_info.core_mode = ARM_MODE_THREAD;
&write_algorithm) != ERROR_OK) {
LOG_WARNING("no working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- };
+ }
retval = target_write_buffer(target, write_algorithm->address,
sizeof(mdr32fx_flash_write_code), mdr32fx_flash_write_code);
LOG_WARNING("no large enough working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
- };
+ }
init_reg_param(®_params[0], "r0", 32, PARAM_IN_OUT); /* flash base (in), status (out) */
init_reg_param(®_params[1], "r1", 32, PARAM_OUT); /* count (32bit) */
" a working area > %zdB in order to write to SPIFI flash.",
sizeof(mrvlqspi_flash_write_code));
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- };
+ }
retval = target_write_buffer(target, write_algorithm->address,
sizeof(mrvlqspi_flash_write_code),
if (target_alloc_working_area(target, fifo_size, &fifo) != ERROR_OK) {
target_free_working_area(target, write_algorithm);
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- };
+ }
armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
armv7m_info.core_mode = ARM_MODE_THREAD;
&write_algorithm) != ERROR_OK) {
LOG_WARNING("no working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- };
+ }
retval = target_write_buffer(target, write_algorithm->address,
sizeof(niietcm4_flash_write_code), niietcm4_flash_write_code);
LOG_WARNING("no large enough working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
- };
+ }
init_reg_param(®_params[0], "r0", 32, PARAM_IN_OUT); /* write_cmd base (in), status (out) */
init_reg_param(®_params[1], "r1", 32, PARAM_OUT); /* count (128bit) */
if ((ppfc & 0xFF) == 0x00) {
LOG_ERROR("Code region 0 size was pre-programmed at the factory, can't change flash protection settings");
return ERROR_FAIL;
- };
+ }
res = target_read_u32(chip->target, NRF51_UICR_CLENR0,
&clenr0);
LOG_ERROR("The chip was not pre-programmed with SoftDevice stack and UICR cannot be erased separately. Please issue mass erase before trying to write to this region");
return ERROR_FAIL;
- };
+ }
res = nrf51_nvmc_generic_erase(chip,
NRF51_NVMC_ERASEUICR,
LOG_ERROR("Code region 0 size was pre-programmed at the factory, "
"mass erase command won't work.");
return ERROR_FAIL;
- };
+ }
res = nrf51_erase_all(chip);
if (res != ERROR_OK) {
&write_algorithm) != ERROR_OK) {
LOG_WARNING("no working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- };
+ }
/* Change values for counters and row size, depending on variant */
if (pic32mx_info->dev_type == MX_1_2) {
&sysreq_wait_algorithm) != ERROR_OK) {
LOG_DEBUG("no working area for sysreq code");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- };
+ }
/* Write the code */
retval = target_write_buffer(target,
&write_algorithm) != ERROR_OK) {
LOG_DEBUG("no working area for block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- };
+ }
/* plus a buffer big enough for this data */
if (wcount * 4 < buffer_size)
}
LOG_DEBUG("retry target_alloc_working_area(%s, size=%u)",
target_name(target), (unsigned) buffer_size);
- };
+ }
target_write_buffer(target, write_algorithm->address,
sizeof(stellaris_write_code),
&write_algorithm) != ERROR_OK) {
LOG_WARNING("no working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- };
+ }
retval = target_write_buffer(target, write_algorithm->address,
sizeof(stm32x_flash_write_code), stm32x_flash_write_code);
LOG_WARNING("no large enough working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
- };
+ }
init_reg_param(®_params[0], "r0", 32, PARAM_IN_OUT); /* flash base (in), status (out) */
init_reg_param(®_params[1], "r1", 32, PARAM_OUT); /* count (halfword-16bit) */
&write_algorithm) != ERROR_OK) {
LOG_WARNING("no working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- };
+ }
retval = target_write_buffer(target, write_algorithm->address,
sizeof(stm32x_flash_write_code),
LOG_WARNING("no large enough working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
- };
+ }
armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
armv7m_info.core_mode = ARM_MODE_THREAD;
&write_algorithm) != ERROR_OK) {
LOG_WARNING("no working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- };
+ }
retval = target_write_buffer(target, write_algorithm->address,
sizeof(stm32l4_flash_write_code),
LOG_WARNING("no large enough working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
- };
+ }
armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
armv7m_info.core_mode = ARM_MODE_THREAD;
&write_algorithm) != ERROR_OK) {
LOG_DEBUG("no working area for block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- };
+ }
/* Write the flashing code */
retval = target_write_buffer(target,
if (target_alloc_working_area_try(target, sizeof(str7x_flash_write_code),
&write_algorithm) != ERROR_OK) {
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- };
+ }
uint8_t code[sizeof(str7x_flash_write_code)];
target_buffer_set_u32_array(target, code, ARRAY_SIZE(str7x_flash_write_code),
&write_algorithm) != ERROR_OK) {
LOG_WARNING("no working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- };
+ }
uint8_t code[sizeof(str9x_flash_write_code)];
target_buffer_set_u32_array(target, code, ARRAY_SIZE(str9x_flash_write_code),
LOG_ERROR("Can't set baud rate to max: %s",
ftdi_get_error_string(&ftdic));
return ERROR_JTAG_DEVICE_ERROR;
- };
+ }
#endif
#if BUILD_OPENJTAG_FTD2XX == 1
__func__);
target->state = TARGET_UNKNOWN;
return ERROR_TARGET_FAILURE;
- };
+ }
if (target->state == TARGET_UNKNOWN) {
LOG_ERROR("%s: Target status invalid - communication failure",
__func__);
return ERROR_TARGET_FAILURE;
- };
+ }
return ERROR_OK;
}
address += buf_cnt;
}
- ;
retval = xscale_load_ic(target, 0x0,
xscale->low_vectors);
Code Review / openocd.git / commitdiff