docs: update docs to include info on TI ICDI 24/924/15
authorSpencer Oliver <>
Thu, 8 Nov 2012 16:09:33 +0000 (16:09 +0000)
committerSpencer Oliver <>
Sun, 23 Dec 2012 21:46:31 +0000 (21:46 +0000)
Change-Id: I3009920f512f76901d187318ee50284db34ab6f7
Signed-off-by: Spencer Oliver <>
Tested-by: jenkins

index f2b2ffe990b50d4fb64323c4a392c0df10fb2585..5d1ef4ad8f6855160e966fecc27a8e047fcf61ff 100644 (file)
@@ -456,6 +456,11 @@ The simplest solution is to get linux to ignore the ST-LINK using one of the fol
 @item add "options usb-storage quirks=483:3744:i" to /etc/modprobe.conf
 @end itemize
+@section USB TI/Stellaris ICDI based
+Texas Instruments has an adapter called @b{ICDI}.
+It is not to be confused with the FTDI based adapters that were originally fitted to their
+evaluation boards. This is the adapter fitted to the Stellaris LaunchPad.
 @section USB Other
 @itemize @bullet
 @item @b{USBprog}
@@ -2804,27 +2809,31 @@ which are not currently documented here.
 @end quotation
 @end deffn
-@deffn {Interface Driver} {stlink}
-ST Micro ST-LINK adapter.
+@deffn {Interface Driver} {hla}
+This is a driver that supports multiple High Level Adapters.
+This type of adapter does not expose some of the lower level api's
+that OpenOCD would normally use to access the target.
+Currently supported adapters include the ST STLINK and TI ICDI.
-@deffn {Config Command} {stlink_device_desc} description
+@deffn {Config Command} {hla_device_desc} description
 Currently Not Supported.
 @end deffn
-@deffn {Config Command} {stlink_serial} serial
+@deffn {Config Command} {hla_serial} serial
 Currently Not Supported.
 @end deffn
-@deffn {Config Command} {stlink_layout} (@option{sg}|@option{usb})
-Specifies the stlink layout to use.
+@deffn {Config Command} {hla_layout} (@option{stlink}|@option{icdi})
+Specifies the adapter layout to use.
 @end deffn
-@deffn {Config Command} {stlink_vid_pid} vid pid
-The vendor ID and product ID of the STLINK device.
+@deffn {Config Command} {hla_vid_pid} vid pid
+The vendor ID and product ID of the device.
 @end deffn
 @deffn {Config Command} {stlink_api} api_level
-Manually sets the stlink api used, valid options are 1 or 2.
+Manually sets the stlink api used, valid options are 1 or 2. (@b{STLINK Only}).
 @end deffn
 @end deffn

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 (RSA)