simplify and unconfuse target_run_algorithm()
authorDavid Brownell <dbrownell@users.sourceforge.net>
Sun, 4 Apr 2010 07:38:39 +0000 (00:38 -0700)
committerDavid Brownell <dbrownell@users.sourceforge.net>
Sun, 4 Apr 2010 07:38:39 +0000 (00:38 -0700)
For some reason there are *two* schemes for interposing logic into
the run_algorithm() code path...  One is a standard procedural wapper
around the target method invocation.

the other (superfluous) one hacked the method table by splicing
a second procedural wrapper into the method table.  Remove it:

* Rename its  slightly-more-featureful wrapper so it becomes
  the standard procedural wrapper, leaving its added logic
  (where it should have been in the first place.

          Also add a paranoia check, to report targets that don't
  support algorithms without traversing a NULL pointer, and
  tweak its code structure a bit so it's easier to modify.

* Get rid of the superfluous/conusing method table hacks.

This is a net simplification, making it simpler to analyse what's
going on, and then interpose logic . ... by ensuring there's only one
natural place for it to live.

------------

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
src/target/target.c
src/target/target_type.h

index 868241ebdad4ea75d9f4c6efaad9aefe236a583a..75c41d381f700e7a83e67d9d628d87edfc7d443d 100644 (file)
@@ -629,16 +629,46 @@ static int target_soft_reset_halt_imp(struct target *target)
        return target->type->soft_reset_halt_imp(target);
 }
 
-static int target_run_algorithm_imp(struct target *target, int num_mem_params, struct mem_param *mem_params, int num_reg_params, struct reg_param *reg_param, uint32_t entry_point, uint32_t exit_point, int timeout_ms, void *arch_info)
+/**
+ * Downloads a target-specific native code algorithm to the target,
+ * and executes it.  * Note that some targets may need to set up, enable,
+ * and tear down a breakpoint (hard or * soft) to detect algorithm
+ * termination, while others may support  lower overhead schemes where
+ * soft breakpoints embedded in the algorithm automatically terminate the
+ * algorithm.
+ *
+ * @param target used to run the algorithm
+ * @param arch_info target-specific description of the algorithm.
+ */
+int target_run_algorithm(struct target *target,
+               int num_mem_params, struct mem_param *mem_params,
+               int num_reg_params, struct reg_param *reg_param,
+               uint32_t entry_point, uint32_t exit_point,
+               int timeout_ms, void *arch_info)
 {
+       int retval = ERROR_FAIL;
+
        if (!target_was_examined(target))
        {
                LOG_ERROR("Target not examined yet");
-               return ERROR_FAIL;
+               goto done;
+       }
+       if (target->type->run_algorithm) {
+               LOG_ERROR("Target type '%s' does not support %s",
+                               target_type_name(target), __func__);
+               goto done;
        }
-       return target->type->run_algorithm_imp(target, num_mem_params, mem_params, num_reg_params, reg_param, entry_point, exit_point, timeout_ms, arch_info);
+
+       retval = target->type->run_algorithm(target,
+                       num_mem_params, mem_params,
+                       num_reg_params, reg_param,
+                       entry_point, exit_point, timeout_ms, arch_info);
+
+done:
+       return retval;
 }
 
+
 int target_read_memory(struct target *target,
                uint32_t address, uint32_t size, uint32_t count, uint8_t *buffer)
 {
@@ -711,17 +741,6 @@ int target_step(struct target *target,
 }
 
 
-int target_run_algorithm(struct target *target,
-               int num_mem_params, struct mem_param *mem_params,
-               int num_reg_params, struct reg_param *reg_param,
-               uint32_t entry_point, uint32_t exit_point,
-               int timeout_ms, void *arch_info)
-{
-       return target->type->run_algorithm(target,
-                       num_mem_params, mem_params, num_reg_params, reg_param,
-                       entry_point, exit_point, timeout_ms, arch_info);
-}
-
 /**
  * Reset the @c examined flag for the given target.
  * Pure paranoia -- targets are zeroed on allocation.
@@ -785,9 +804,6 @@ static int target_init_one(struct command_context *cmd_ctx,
        type->soft_reset_halt_imp = target->type->soft_reset_halt;
        type->soft_reset_halt = target_soft_reset_halt_imp;
 
-       type->run_algorithm_imp = target->type->run_algorithm;
-       type->run_algorithm = target_run_algorithm_imp;
-
        /* Sanity-check MMU support ... stub in what we must, to help
         * implement it in stages, but warn if we need to do so.
         */
index 70eb96253754a457879b13806ce99e1aade98c9b..d3db8b55decc7aa8ce82eb031d78a0e90527b0bc 100644 (file)
@@ -146,8 +146,6 @@ struct target_type
         */
        int (*remove_watchpoint)(struct target *target, struct watchpoint *watchpoint);
 
-       /* target algorithm support */
-       int (*run_algorithm_imp)(struct target *target, int num_mem_params, struct mem_param *mem_params, int num_reg_params, struct reg_param *reg_param, uint32_t entry_point, uint32_t exit_point, int timeout_ms, void *arch_info);
        /**
         * Target algorithm support.  Do @b not call this method directly,
         * use target_run_algorithm() instead.

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)