flash/nor/spi: Add issi is25lq040b to device list

The HiFive Inventor uses this flash chip, so adding it will allow for
openocd to be used to program it. These values were taken from the
chip's documentation.

Signed-off-by: Fawaz Tirmizi <fawaz@rivosinc.com>
Change-Id: I15c9d35f99d4500f73134cdc2d1b9ab6279b491c
Reviewed-on: https://review.openocd.org/c/openocd/+/7135
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

diff --git a/src/flash/nor/spi.c b/src/flash/nor/spi.c
index eed747b5851f7dc231846315a41a70fc65135cc5..373a9a14413ab70e2dec52a174a1ee4233a6c0a0 100644 (file)
--- a/src/flash/nor/spi.c
+++ b/src/flash/nor/spi.c
@@ -112,6 +112,7 @@ const struct flash_device flash_devices[] = {
        FLASH_ID("gd gd25q128c",        0x03, 0xeb, 0x02, 0xd8, 0xc7, 0x001840c8, 0x100, 0x10000, 0x1000000),
        FLASH_ID("gd gd25q256c",        0x13, 0x00, 0x12, 0xdc, 0xc7, 0x001940c8, 0x100, 0x10000, 0x2000000),
        FLASH_ID("gd gd25q512mc",       0x13, 0x00, 0x12, 0xdc, 0xc7, 0x002040c8, 0x100, 0x10000, 0x4000000),
+       FLASH_ID("issi is25lq040b",     0x03, 0xeb, 0x02, 0x20, 0xc7, 0x0013409d, 0x100, 0x1000,  0x80000),
        FLASH_ID("issi is25lp032",      0x03, 0x00, 0x02, 0xd8, 0xc7, 0x0016609d, 0x100, 0x10000, 0x400000),
        FLASH_ID("issi is25lp064",      0x03, 0x00, 0x02, 0xd8, 0xc7, 0x0017609d, 0x100, 0x10000, 0x800000),
        FLASH_ID("issi is25lp128d",     0x03, 0xeb, 0x02, 0xd8, 0xc7, 0x0018609d, 0x100, 0x10000, 0x1000000),