arm964e: Add support for ARM946E target.
authorddraskovic <ddraskovic@sequans.com>
Thu, 4 Nov 2010 13:33:10 +0000 (14:33 +0100)
committerØyvind Harboe <oyvind.harboe@zylin.com>
Thu, 4 Nov 2010 13:52:47 +0000 (14:52 +0100)
So far most of the people have been using existing ARM966E in the
place of ARM946E, because they have practically the same scan chains.

However, ARM946E has caches, which further complicates JATG handling
via scan-chain. this was preventing single-stepping for ARM946E when
SW breakpoints are used.

This patch thus introduces :
1) Correct cache handling on memory write
2) Possibility to flush whole cache and turn it off during debug, or
just to flush affected lines (faster and better)
3) Correct SW breakpoint handling and correct single-stepping
4) Corrects the bug on CP15 read and write, so CP15 values
are now correctly R/W

src/target/Makefile.am
src/target/arm946e.c [new file with mode: 0644]
src/target/arm946e.h [new file with mode: 0644]
src/target/target.c

index e01e0774b78bee1bcb1d626e448c83ba23ed1cff..1e29ae7d5c2400188d6e94a6cb8de8b8c17fa2ca 100644 (file)
@@ -60,6 +60,7 @@ ARM7_9_SRC = \
        arm9tdmi.c \
        arm920t.c \
        arm966e.c \
        arm9tdmi.c \
        arm920t.c \
        arm966e.c \
+       arm946e.c \
        arm926ejs.c \
        feroceon.c
 
        arm926ejs.c \
        feroceon.c
 
@@ -124,6 +125,7 @@ noinst_HEADERS = \
        arm920t.h \
        arm926ejs.h \
        arm966e.h \
        arm920t.h \
        arm926ejs.h \
        arm966e.h \
+       arm946e.h \
        arm11.h \
        arm11_dbgtap.h \
        armv4_5.h \
        arm11.h \
        arm11_dbgtap.h \
        armv4_5.h \
diff --git a/src/target/arm946e.c b/src/target/arm946e.c
new file mode 100644 (file)
index 0000000..b9b9cef
--- /dev/null
@@ -0,0 +1,712 @@
+/***************************************************************************
+ *   Copyright (C) 2005 by Dominic Rath                                    *
+ *   Dominic.Rath@gmx.de                                                   *
+ *                                                                         *
+ *   Copyright (C) 2008 by Spencer Oliver                                  *
+ *   spen@spen-soft.co.uk                                                  *
+ *                                                                         *
+ *   Copyright (C) 2010 by Drasko DRASKOVIC                                *
+ *   drasko.draskovic@gmail.com                                            *
+ *                                                                         *
+ *   This program is free software; you can redistribute it and/or modify  *
+ *   it under the terms of the GNU General Public License as published by  *
+ *   the Free Software Foundation; either version 2 of the License, or     *
+ *   (at your option) any later version.                                   *
+ *                                                                         *
+ *   This program is distributed in the hope that it will be useful,       *
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
+ *   GNU General Public License for more details.                          *
+ *                                                                         *
+ *   You should have received a copy of the GNU General Public License     *
+ *   along with this program; if not, write to the                         *
+ *   Free Software Foundation, Inc.,                                       *
+ *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
+ ***************************************************************************/
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "arm946e.h"
+#include "target_type.h"
+#include "arm_opcodes.h"
+
+#include "breakpoints.h"
+
+#if 0
+#define _DEBUG_INSTRUCTION_EXECUTION_
+#endif
+
+#define NB_CACHE_WAYS 4
+
+static uint32_t dc = 0x0;
+static uint32_t ic = 0x0;
+
+/**
+ * flag to give info about cache manipulation during debug :
+ * "0" -       cache lines are invalidated "on the fly", for affected addresses.
+ *                     This is prefered from performance point of view.
+ * "1" -       cache is invalidated and switched off on debug_entry, and switched back on on restore.
+ *                     It is kept off during debugging.
+ */
+static uint8_t arm946e_preserve_cache;
+
+int arm946e_post_debug_entry(struct target *target);
+void arm946e_pre_restore_context(struct target *target);
+static int arm946e_read_cp15(struct target *target, int reg_addr, uint32_t *value);
+
+
+int arm946e_init_arch_info(struct target *target, struct arm946e_common *arm946e, struct jtag_tap *tap)
+{
+       struct arm7_9_common *arm7_9 = &arm946e->arm7_9_common;
+
+       /* initialize arm7/arm9 specific info (including armv4_5) */
+       arm9tdmi_init_arch_info(target, arm7_9, tap);
+
+       arm946e->common_magic = ARM946E_COMMON_MAGIC;
+
+       /**
+        * The ARM946E-S implements the ARMv5TE architecture which
+        * has the BKPT instruction, so we don't have to use a watchpoint comparator
+        */
+       arm7_9->arm_bkpt = ARMV5_BKPT(0x0);
+       arm7_9->thumb_bkpt = ARMV5_T_BKPT(0x0) & 0xffff;
+
+
+       arm7_9->post_debug_entry = arm946e_post_debug_entry;
+       arm7_9->pre_restore_context = arm946e_pre_restore_context;
+
+       /**
+        * disabling linefills leads to lockups, so keep them enabled for now
+        * this doesn't affect correctness, but might affect timing issues, if
+        * important data is evicted from the cache during the debug session
+        */
+       arm946e_preserve_cache = 0;
+
+       /* override hw single-step capability from ARM9TDMI */
+       //arm7_9->has_single_step = 1;
+
+       return ERROR_OK;
+}
+
+static int arm946e_target_create(struct target *target, Jim_Interp *interp)
+{
+       struct arm946e_common *arm946e = calloc(1,sizeof(struct arm946e_common));
+
+       arm946e_init_arch_info(target, arm946e, target->tap);
+
+       return ERROR_OK;
+}
+
+static int arm946e_verify_pointer(struct command_context *cmd_ctx,
+               struct arm946e_common *arm946e)
+{
+       if (arm946e->common_magic != ARM946E_COMMON_MAGIC) {
+               command_print(cmd_ctx, "target is not an ARM946");
+               return ERROR_TARGET_INVALID;
+       }
+       return ERROR_OK;
+}
+
+/*
+ * REVISIT:  The "read_cp15" and "write_cp15" commands could hook up
+ * to eventual mrc() and mcr() routines ... the reg_addr values being
+ * constructed (for CP15 only) from Opcode_1, Opcode_2, and CRn values.
+ * See section 7.3 of the ARM946E-S TRM.
+ */
+static int arm946e_read_cp15(struct target *target, int reg_addr, uint32_t *value)
+{
+       int retval = ERROR_OK;
+       struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
+       struct arm_jtag *jtag_info = &arm7_9->jtag_info;
+       struct scan_field fields[3];
+       uint8_t reg_addr_buf = reg_addr & 0x3f;
+       uint8_t nr_w_buf = 0;
+
+       if ((retval = arm_jtag_scann(jtag_info, 0xf, TAP_IDLE)) != ERROR_OK)
+       {
+               return retval;
+       }
+       retval = arm_jtag_set_instr(jtag_info, jtag_info->intest_instr, NULL, TAP_IDLE);
+       if (retval != ERROR_OK)
+               return retval;
+
+       fields[0].num_bits = 32;
+       /* REVISIT: table 7-2 shows that bits 31-31 need to be
+        * specified for accessing BIST registers ...
+        */
+       fields[0].out_value = NULL;
+       fields[0].in_value = NULL;
+
+       fields[1].num_bits = 6;
+       fields[1].out_value = &reg_addr_buf;
+       fields[1].in_value = NULL;
+
+       fields[2].num_bits = 1;
+       fields[2].out_value = &nr_w_buf;
+       fields[2].in_value = NULL;
+
+       jtag_add_dr_scan(jtag_info->tap, 3, fields, TAP_IDLE);
+
+       fields[0].in_value = (uint8_t *)value;
+       jtag_add_dr_scan(jtag_info->tap, 3, fields, TAP_IDLE);
+
+       jtag_add_callback(arm_le_to_h_u32, (jtag_callback_data_t)value);
+
+#ifdef _DEBUG_INSTRUCTION_EXECUTION_
+       LOG_DEBUG("addr: 0x%x value: %8.8x", reg_addr, *value);
+#endif
+
+       if ((retval = jtag_execute_queue()) != ERROR_OK)
+       {
+               return retval;
+       }
+
+       return ERROR_OK;
+}
+
+int arm946e_write_cp15(struct target *target, int reg_addr, uint32_t value)
+{
+       int retval = ERROR_OK;
+       struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
+       struct arm_jtag *jtag_info = &arm7_9->jtag_info;
+       struct scan_field fields[3];
+       uint8_t reg_addr_buf = reg_addr & 0x3f;
+       uint8_t nr_w_buf = 1;
+       uint8_t value_buf[4];
+
+       buf_set_u32(value_buf, 0, 32, value);
+
+       if ((retval = arm_jtag_scann(jtag_info, 0xf, TAP_IDLE)) != ERROR_OK)
+       {
+               return retval;
+       }
+       retval = arm_jtag_set_instr(jtag_info, jtag_info->intest_instr, NULL, TAP_IDLE);
+       if (retval != ERROR_OK)
+               return retval;
+
+       fields[0].num_bits = 32;
+       fields[0].out_value = value_buf;
+       fields[0].in_value = NULL;
+
+       fields[1].num_bits = 6;
+       fields[1].out_value = &reg_addr_buf;
+       fields[1].in_value = NULL;
+
+       fields[2].num_bits = 1;
+       fields[2].out_value = &nr_w_buf;
+       fields[2].in_value = NULL;
+
+       jtag_add_dr_scan(jtag_info->tap, 3, fields, TAP_IDLE);
+
+#ifdef _DEBUG_INSTRUCTION_EXECUTION_
+       LOG_DEBUG("addr: 0x%x value: %8.8x", reg_addr, value);
+#endif
+
+       if ((retval = jtag_execute_queue()) != ERROR_OK)
+       {
+               return retval;
+       }
+
+       return ERROR_OK;
+}
+
+uint32_t arm946e_invalidate_whole_dcache(struct target *target)
+{
+
+   uint32_t csize = 0;
+   uint32_t shift = 0;
+   uint32_t cp15_idx, seg, dtag;
+   int nb_idx, idx = 0;
+   int retval;
+
+   /* Get cache type */
+   arm946e_read_cp15(target, 0x01, (uint32_t *) &csize);
+
+   csize = (csize >> 18) & 0x0F;
+
+       if (csize == 0)
+               shift = 0;
+       else
+               shift = csize - 0x3; /* Now 0 = 4KB, 1 = 8KB, ... */
+
+       /* Cache size, given in bytes */
+       csize = 1 << (12 + shift);
+       /* One line (index) is 32 bytes (8 words) long */
+       nb_idx = (csize / 32);  /* gives nb of lines (indexes) in the cache */
+
+       /* Loop for all segmentde (i.e. ways) */
+       for( seg=0; seg < NB_CACHE_WAYS; seg++)
+       {
+               /* Loop for all indexes */
+               for(idx=0; idx < nb_idx; idx++)
+               {
+                       /* Form and write cp15 index (segment + line idx) */
+                       cp15_idx = seg << 30 | idx << 5;
+                       retval = arm946e_write_cp15(target, 0x3a, cp15_idx);
+                       if (retval != ERROR_OK)
+                       {
+                               LOG_DEBUG("ERROR writing index\n");
+                               return retval;
+                       }
+
+                       /* Read dtag */
+                       arm946e_read_cp15(target, 0x16, (uint32_t *) &dtag);
+
+                       /* Check cache line VALID bit */
+                       if ( !(dtag >> 4 & 0x1) )
+                               continue;
+
+                       /* Clean data cache line */
+                       retval = arm946e_write_cp15(target, 0x35, 0x1);
+                       if (retval != ERROR_OK)
+                       {
+                               LOG_DEBUG("ERROR cleaning cache line\n");
+                               return retval;
+                       }
+
+                       /* Flush data cache line */
+                       retval = arm946e_write_cp15(target, 0x1a, 0x1);
+                       if (retval != ERROR_OK)
+                       {
+                               LOG_DEBUG("ERROR flushing cache line\n");
+                               return retval;
+                       }
+               }
+       }
+
+       return ERROR_OK;
+}
+
+uint32_t arm946e_invalidate_whole_icache(struct target *target)
+{
+       int retval;
+
+       LOG_DEBUG("FLUSHING I$");
+
+       /**
+        *  Invalidate (flush) I$
+        *  mcr 15, 0, r0, cr7, cr5, {0}
+        */
+       retval = arm946e_write_cp15(target, 0x0f, 0x1);
+       if (retval != ERROR_OK)
+       {
+               LOG_DEBUG("ERROR flushing I$\n");
+               return retval;
+       }
+
+       return ERROR_OK;
+}
+
+int arm946e_post_debug_entry(struct target *target)
+{
+       uint32_t ctr_reg = 0x0;
+       uint32_t retval = ERROR_OK;
+
+       /* See if CACHES are enabled, and save that info
+        * in the global vars, so that arm946e_pre_restore_context() can use them */
+       arm946e_read_cp15(target, 0x02, (uint32_t *) &ctr_reg);
+       dc = (ctr_reg >> 2) & 0x01;
+       ic = (ctr_reg >> 12) & 0x01;
+
+       if (arm946e_preserve_cache)
+       {
+               if (dc == 1)
+               {
+                       /* Clean and flush D$ */
+                       arm946e_invalidate_whole_dcache(target);
+
+                       /* Disable D$ */
+                       ctr_reg &= ~(1 << 2);
+               }
+
+               if (ic == 1)
+               {
+                       /* Flush I$ */
+                       arm946e_invalidate_whole_icache(target);
+
+                       /* Disable I$ */
+                       ctr_reg &= ~(1 << 12);
+               }
+
+               /* Write the new configuration */
+               retval = arm946e_write_cp15(target, 0x02, ctr_reg);
+               if (retval != ERROR_OK)
+               {
+                       LOG_DEBUG("ERROR disabling cache");
+                       return retval;
+               }
+       } /* if preserve_cache */
+
+       return ERROR_OK;
+}
+
+void arm946e_pre_restore_context(struct target *target)
+{
+       uint32_t ctr_reg = 0x0;
+       uint32_t retval;
+
+       if (arm946e_preserve_cache)
+       {
+               /* Get the contents of the CTR reg */
+               arm946e_read_cp15(target, 0x02, (uint32_t *) &ctr_reg);
+
+               /**
+                * Read-modify-write CP15 test state register
+                * to reenable I/D-cache linefills
+                */
+               if (dc == 1)
+               {
+                       /* Enable D$ */
+                       ctr_reg |= 1 << 2;
+               }
+
+               if (ic == 1)
+               {
+                       /* Enable I$ */
+                       ctr_reg |= 1 << 12;
+               }
+
+               /* Write the new configuration */
+               retval = arm946e_write_cp15(target, 0x02, ctr_reg);
+               if (retval != ERROR_OK)
+               {
+                       LOG_DEBUG("ERROR enabling cache\n");
+               }
+       } /* if preserve_cache */
+}
+
+uint32_t arm946e_invalidate_dcache(struct target *target, uint32_t address,
+               uint32_t size, uint32_t count)
+{
+       uint32_t csize = 0x0;
+       uint32_t shift = 0;
+       uint32_t cur_addr = 0x0;
+       uint32_t cp15_idx, set, way, dtag;
+       int nb_idx;
+       uint32_t i = 0;
+       int retval;
+
+       for(i = 0; i < count*size; i++)
+       {
+               cur_addr = address + i;
+
+               /* Get cache type */
+               arm946e_read_cp15(target, 0x01, (uint32_t *) &csize);
+
+               /* Conclude cache size to find number of lines */
+               csize = (csize >> 18) & 0x0F;
+
+               if (csize == 0)
+                       shift = 0;
+               else
+                       shift = csize - 0x3; /* Now 0 = 4KB, 1 = 8KB, ... */
+
+               csize = 1 << (12 + shift);
+               nb_idx = (csize / 32);
+
+               set = (cur_addr >> 5) & 0xff;   /* set field is 8 bits long */
+
+               for (way = 0; way < NB_CACHE_WAYS; way++)
+               {
+                       /**
+                        * Find if the affected address is kept in the cache.
+                        * Because JTAG Scan Chain 15 offers limited approach,
+                        * we have to loop through all cache ways (segments) and
+                        * read cache tags, then compare them with with address.
+                        */
+
+                       /* Form and write cp15 index (segment + line idx) */
+                       cp15_idx = way << 30 | set << 5;
+                       retval = arm946e_write_cp15(target, 0x3a, cp15_idx);
+                       if (retval != ERROR_OK)
+                       {
+                               LOG_DEBUG("ERROR writing index\n");
+                               return retval;
+                       }
+
+                       /* Read dtag */
+                       arm946e_read_cp15(target, 0x16, (uint32_t *) &dtag);
+
+                       /* Check cache line VALID bit */
+                       if ( !(dtag >> 4 & 0x1) )
+                               continue;
+
+                       /* If line is valid and corresponds to affected address - invalidate it */
+                       if (dtag >> 5 == cur_addr >> 5)
+                       {
+                               /* Clean data cache line */
+                               retval = arm946e_write_cp15(target, 0x35, 0x1);
+                               if (retval != ERROR_OK)
+                               {
+                                       LOG_DEBUG("ERROR cleaning cache line\n");
+                                       return retval;
+                               }
+
+                               /* Flush data cache line */
+                               retval = arm946e_write_cp15(target, 0x1c, 0x1);
+                               if (retval != ERROR_OK)
+                               {
+                                       LOG_DEBUG("ERROR flushing cache line\n");
+                                       return retval;
+                               }
+
+                               break;
+                       }
+               } /* loop through all 4 ways */
+       } /* loop through all addresses */
+
+       return ERROR_OK;
+}
+
+uint32_t arm946e_invalidate_icache(struct target *target, uint32_t address,
+               uint32_t size, uint32_t count)
+{
+       uint32_t cur_addr = 0x0;
+       uint32_t cp15_idx, set, way, itag;
+       uint32_t i = 0;
+       int retval;
+
+       for(i = 0; i < count*size; i++)
+       {
+               cur_addr = address + i;
+
+               set = (cur_addr >> 5) & 0xff;   /* set field is 8 bits long */
+
+               for (way = 0; way < NB_CACHE_WAYS; way++)
+               {
+                       /* Form and write cp15 index (segment + line idx) */
+                       cp15_idx = way << 30 | set << 5;
+                       retval = arm946e_write_cp15(target, 0x3a, cp15_idx);
+                       if (retval != ERROR_OK)
+                       {
+                               LOG_DEBUG("ERROR writing index\n");
+                               return retval;
+                       }
+
+                       /* Read itag */
+                       arm946e_read_cp15(target, 0x17, (uint32_t *) &itag);
+
+                       /* Check cache line VALID bit */
+                       if ( !(itag >> 4 & 0x1) )
+                               continue;
+
+                       /* If line is valid and corresponds to affected address - invalidate it */
+                       if (itag >> 5 == cur_addr >> 5)
+                       {
+                               /* Flush I$ line */
+                               retval = arm946e_write_cp15(target, 0x1d, 0x0);
+                               if (retval != ERROR_OK)
+                               {
+                                       LOG_DEBUG("ERROR flushing cache line\n");
+                                       return retval;
+                               }
+
+                               break;
+                       }
+               } /* way loop */
+       } /* addr loop */
+
+       return ERROR_OK;
+}
+
+/** Writes a buffer, in the specified word size, with current MMU settings. */
+int arm946e_write_memory(struct target *target, uint32_t address,
+               uint32_t size, uint32_t count, uint8_t *buffer)
+{
+       int retval;
+
+       LOG_DEBUG("-");
+
+       /* Invalidate D$ if it is ON */
+       if (!arm946e_preserve_cache && dc == 1)
+       {
+               arm946e_invalidate_dcache(target, address, size, count);
+       }
+
+       /**
+        * Write memory
+        */
+       if ( ( retval = arm7_9_write_memory(target, address,
+                       size, count, buffer) ) != ERROR_OK )
+       {
+               return retval;
+       }
+
+       /* *
+        * Invalidate I$ if it is ON.
+        *
+        * D$ has been cleaned and flushed before mem write thus forcing it to behave like write-through,
+        * because arm7_9_write_memory() has seen non-valid bit in D$
+        * and wrote data into physical RAM (without touching or allocating the cache line).
+        * From ARM946ES Technical Reference Manual we can see that it uses "allocate on read-miss"
+        * policy for both I$ and D$ (Chapter 3.2 and 3.3)
+        *
+        * Explanation :
+        * "ARM system developer's guide: designing and optimizing system software" by
+        * Andrew N. Sloss, Dominic Symes and Chris Wright,
+        * Chapter 12.3.3 Allocating Policy on a Cache Miss :
+        * A read allocate on cache miss policy allocates a cache line only during a read from main memory.
+        * If the victim cache line contains valid data, then it is written to main memory before the cache line
+        * is filled with new data.
+        * Under this strategy, a write of new data to memory does not update the contents of the cache memory
+        * unless a cache line was allocated on a previous read from main memory.
+        * If the cache line contains valid data, then the write updates the cache and may update the main memory if
+        * the cache write policy is write-through.
+        * If the data is not in the cache, the controller writes to main memory only.
+        */
+       if (!arm946e_preserve_cache && ic == 1)
+       {
+               arm946e_invalidate_icache(target, address, size, count);
+       }
+
+       return ERROR_OK;
+
+}
+
+int arm946e_read_memory(struct target *target, uint32_t address,
+               uint32_t size, uint32_t count, uint8_t *buffer)
+{
+       int retval;
+
+       LOG_DEBUG("-");
+
+       if ( ( retval = arm7_9_read_memory(target, address,
+                       size, count, buffer) ) != ERROR_OK )
+       {
+               return retval;
+       }
+
+       return ERROR_OK;
+}
+
+
+COMMAND_HANDLER(arm946e_handle_cp15_command)
+{
+       int retval;
+       struct target *target = get_current_target(CMD_CTX);
+       struct arm946e_common *arm946e = target_to_arm946(target);
+
+       retval = arm946e_verify_pointer(CMD_CTX, arm946e);
+       if (retval != ERROR_OK)
+               return retval;
+
+       if (target->state != TARGET_HALTED)
+       {
+               command_print(CMD_CTX, "target must be stopped for \"%s\" command", CMD_NAME);
+               return ERROR_OK;
+       }
+
+       /* one or more argument, access a single register (write if second argument is given */
+       if (CMD_ARGC >= 1)
+       {
+               uint32_t address;
+               COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], address);
+
+               if (CMD_ARGC == 1)
+               {
+                       uint32_t value;
+                       if ((retval = arm946e_read_cp15(target, address, &value)) != ERROR_OK)
+                       {
+                               command_print(CMD_CTX,
+                                               "couldn't access reg %" PRIi32,
+                                               address);
+                               return ERROR_OK;
+                       }
+                       if ((retval = jtag_execute_queue()) != ERROR_OK)
+                       {
+                               return retval;
+                       }
+
+                       command_print(CMD_CTX, "%" PRIi32 ": %8.8" PRIx32,
+                                       address, value);
+               }
+               else if (CMD_ARGC == 2)
+               {
+                       uint32_t value;
+                       COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], value);
+                       if ((retval = arm946e_write_cp15(target, address, value)) != ERROR_OK)
+                       {
+                               command_print(CMD_CTX,
+                                               "couldn't access reg %" PRIi32,
+                                               address);
+                               return ERROR_OK;
+                       }
+                       command_print(CMD_CTX, "%" PRIi32 ": %8.8" PRIx32,
+                                       address, value);
+               }
+       }
+
+       return ERROR_OK;
+}
+
+static const struct command_registration arm946e_exec_command_handlers[] = {
+       {
+               .name = "cp15",
+               .handler = arm946e_handle_cp15_command,
+               .mode = COMMAND_EXEC,
+               .usage = "regnum [value]",
+               .help = "display/modify cp15 register",
+       },
+       COMMAND_REGISTRATION_DONE
+};
+
+const struct command_registration arm946e_command_handlers[] = {
+       {
+               .chain = arm9tdmi_command_handlers,
+       },
+       {
+               .name = "arm946e",
+               .mode = COMMAND_ANY,
+               .help = "arm946e command group",
+               .chain = arm946e_exec_command_handlers,
+       },
+       COMMAND_REGISTRATION_DONE
+};
+
+/** Holds methods for ARM946 targets. */
+struct target_type arm946e_target =
+{
+       .name = "arm946e",
+
+       .poll = arm7_9_poll,
+       .arch_state = arm_arch_state,
+
+       .target_request_data = arm7_9_target_request_data,
+
+       .halt = arm7_9_halt,
+       .resume = arm7_9_resume,
+       .step = arm7_9_step,
+
+       .assert_reset = arm7_9_assert_reset,
+       .deassert_reset = arm7_9_deassert_reset,
+       .soft_reset_halt = arm7_9_soft_reset_halt,
+
+       .get_gdb_reg_list = arm_get_gdb_reg_list,
+
+       //.read_memory = arm7_9_read_memory,
+       //.write_memory = arm7_9_write_memory,
+       .read_memory = arm946e_read_memory,
+       .write_memory = arm946e_write_memory,
+
+       .bulk_write_memory = arm7_9_bulk_write_memory,
+
+       .checksum_memory = arm_checksum_memory,
+       .blank_check_memory = arm_blank_check_memory,
+
+       .run_algorithm = armv4_5_run_algorithm,
+
+       .add_breakpoint = arm7_9_add_breakpoint,
+       .remove_breakpoint = arm7_9_remove_breakpoint,
+       //.add_breakpoint = arm946e_add_breakpoint,
+       //.remove_breakpoint = arm946e_remove_breakpoint,
+
+       .add_watchpoint = arm7_9_add_watchpoint,
+       .remove_watchpoint = arm7_9_remove_watchpoint,
+
+       .commands = arm946e_command_handlers,
+       .target_create = arm946e_target_create,
+       .init_target = arm9tdmi_init_target,
+       .examine = arm7_9_examine,
+       .check_reset = arm7_9_check_reset,
+};
diff --git a/src/target/arm946e.h b/src/target/arm946e.h
new file mode 100644 (file)
index 0000000..557674e
--- /dev/null
@@ -0,0 +1,53 @@
+/***************************************************************************
+ *   Copyright (C) 2005 by Dominic Rath                                    *
+ *   Dominic.Rath@gmx.de                                                   *
+ *                                                                         *
+ *   Copyright (C) 2008 by Spencer Oliver                                  *
+ *   spen@spen-soft.co.uk                                                  *
+ *                                                                         *
+ *   Copyright (C) 2010 by Drasko DRASKOVIC                                *
+ *   drasko.draskovic@gmail.com                                            *
+ *                                                                         *
+ *   This program is free software; you can redistribute it and/or modify  *
+ *   it under the terms of the GNU General Public License as published by  *
+ *   the Free Software Foundation; either version 2 of the License, or     *
+ *   (at your option) any later version.                                   *
+ *                                                                         *
+ *   This program is distributed in the hope that it will be useful,       *
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
+ *   GNU General Public License for more details.                          *
+ *                                                                         *
+ *   You should have received a copy of the GNU General Public License     *
+ *   along with this program; if not, write to the                         *
+ *   Free Software Foundation, Inc.,                                       *
+ *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
+ ***************************************************************************/
+#ifndef ARM946E_H
+#define ARM946E_H
+
+#include "arm9tdmi.h"
+
+#define        ARM946E_COMMON_MAGIC 0x20f920f9
+
+struct arm946e_common
+{
+       struct arm7_9_common arm7_9_common;
+       int common_magic;
+       uint32_t cp15_control_reg;
+};
+
+static inline struct arm946e_common *
+target_to_arm946(struct target *target)
+{
+       return container_of(target->arch_info, struct arm946e_common,
+                       arm7_9_common.armv4_5_common);
+}
+
+int arm946e_init_arch_info(struct target *target,
+               struct arm946e_common *arm946e, struct jtag_tap *tap);
+int arm946e_write_cp15(struct target *target, int reg_addr, uint32_t value);
+
+extern const struct command_registration arm946e_command_handlers[];
+
+#endif /* ARM946E_H */
index d200ebc98427b2a3a71c0ed466ab9453eca9b1f6..a282aab6ad908919c9307b981022267aa616d176 100644 (file)
@@ -58,6 +58,7 @@ extern struct target_type arm720t_target;
 extern struct target_type arm9tdmi_target;
 extern struct target_type arm920t_target;
 extern struct target_type arm966e_target;
 extern struct target_type arm9tdmi_target;
 extern struct target_type arm920t_target;
 extern struct target_type arm966e_target;
+extern struct target_type arm946e_target;
 extern struct target_type arm926ejs_target;
 extern struct target_type fa526_target;
 extern struct target_type feroceon_target;
 extern struct target_type arm926ejs_target;
 extern struct target_type fa526_target;
 extern struct target_type feroceon_target;
@@ -79,6 +80,7 @@ static struct target_type *target_types[] =
        &arm920t_target,
        &arm720t_target,
        &arm966e_target,
        &arm920t_target,
        &arm720t_target,
        &arm966e_target,
+       &arm946e_target,
        &arm926ejs_target,
        &fa526_target,
        &feroceon_target,
        &arm926ejs_target,
        &fa526_target,
        &feroceon_target,

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)