target/arm: Add PLD command to ARM disassembler. 48/4348/4
authorJames Marshall <jcmarsh@gwmail.gwu.edu>
Wed, 17 Jan 2018 02:08:16 +0000 (21:08 -0500)
committerMatthias Welwarsky <matthias@welwarsky.de>
Fri, 22 Jun 2018 06:42:27 +0000 (07:42 +0100)
Updates the ARM disassembler to handle PLD (PreLoad Data) commands.
Previously handled by printing a TODO message. There are three forms of
the command: literal, register, and immediate. Simply decode based off
of the A1 encoding for the instructions in the ARM ARM. Also fixes mask
to handle PLDW commands.

Change-Id: I63bf97f16af254e838462c7cfac80f6c4681c556
Signed-off-by: James Marshall <jcmarsh@gwmail.gwu.edu>
Reviewed-on: http://openocd.zylin.com/4348
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
src/target/arm_disassembler.c

index 17948d6da49beecd893c997e544f8d9a0e9eebdd..8eb819446b545c1d163bd135cab299490982d4e7 100644 (file)
@@ -118,15 +118,78 @@ static int evaluate_pld(uint32_t opcode,
                        uint32_t address, struct arm_instruction *instruction)
 {
        /* PLD */
                        uint32_t address, struct arm_instruction *instruction)
 {
        /* PLD */
-       if ((opcode & 0x0d70f000) == 0x0550f000) {
+       if ((opcode & 0x0d30f000) == 0x0510f000) {
+               uint8_t Rn;
+               uint8_t U;
+               unsigned offset;
+
                instruction->type = ARM_PLD;
                instruction->type = ARM_PLD;
+               Rn = (opcode & 0xf0000) >> 16;
+               U = (opcode & 0x00800000) >> 23;
+               if (Rn == 0xf) {
+                       /* literal */
+                       offset = opcode & 0x0fff;
+                       snprintf(instruction->text, 128,
+                                "0x%8.8" PRIx32 "\t0x%8.8" PRIx32 "\tPLD %s%d",
+                                address, opcode, U ? "" : "-", offset);
+               } else {
+                       uint8_t I, R;
 
 
-               snprintf(instruction->text,
-                               128,
-                               "0x%8.8" PRIx32 "\t0x%8.8" PRIx32 "\tPLD ...TODO...",
-                               address,
-                               opcode);
+                       I = (opcode & 0x02000000) >> 25;
+                       R = (opcode & 0x00400000) >> 22;
+
+                       if (I) {
+                               /* register PLD{W} [<Rn>,+/-<Rm>{, <shift>}] */
+                               offset = (opcode & 0x0F80) >> 7;
+                               uint8_t Rm;
+                               Rm = opcode & 0xf;
+
+                               if (offset == 0) {
+                                       /* No shift */
+                                       snprintf(instruction->text, 128,
+                                                "0x%8.8" PRIx32 "\t0x%8.8" PRIx32 "\tPLD%s [r%d, %sr%d]",
+                                                address, opcode, R ? "" : "W", Rn, U ? "" : "-", Rm);
+
+                               } else {
+                                       uint8_t shift;
+                                       shift = (opcode & 0x60) >> 5;
 
 
+                                       if (shift == 0x0) {
+                                               /* LSL */
+                                               snprintf(instruction->text, 128,
+                                                        "0x%8.8" PRIx32 "\t0x%8.8" PRIx32 "\tPLD%s [r%d, %sr%d, LSL #0x%x)",
+                                                        address, opcode, R ? "" : "W", Rn, U ? "" : "-", Rm, offset);
+                                       } else if (shift == 0x1) {
+                                               /* LSR */
+                                               snprintf(instruction->text, 128,
+                                                        "0x%8.8" PRIx32 "\t0x%8.8" PRIx32 "\tPLD%s [r%d, %sr%d, LSR #0x%x)",
+                                                        address, opcode, R ? "" : "W", Rn, U ? "" : "-", Rm, offset);
+                                       } else if (shift == 0x2) {
+                                               /* ASR */
+                                               snprintf(instruction->text, 128,
+                                                        "0x%8.8" PRIx32 "\t0x%8.8" PRIx32 "\tPLD%s [r%d, %sr%d, ASR #0x%x)",
+                                                        address, opcode, R ? "" : "W", Rn, U ? "" : "-", Rm, offset);
+                                       } else if (shift == 0x3) {
+                                               /* ROR */
+                                               snprintf(instruction->text, 128,
+                                                        "0x%8.8" PRIx32 "\t0x%8.8" PRIx32 "\tPLD%s [r%d, %sr%d, ROR #0x%x)",
+                                                        address, opcode, R ? "" : "W", Rn, U ? "" : "-", Rm, offset);
+                                       }
+                               }
+                       } else {
+                               /* immediate PLD{W} [<Rn>, #+/-<imm12>] */
+                               offset = opcode & 0x0fff;
+                               if (offset == 0) {
+                                       snprintf(instruction->text, 128,
+                                                "0x%8.8" PRIx32 "\t0x%8.8" PRIx32 "\tPLD%s [r%d]",
+                                                address, opcode, R ? "" : "W", Rn);
+                               } else {
+                                       snprintf(instruction->text, 128,
+                                                "0x%8.8" PRIx32 "\t0x%8.8" PRIx32 "\tPLD%s [r%d, #%s%d]",
+                                                address, opcode, R ? "" : "W", Rn, U ? "" : "-", offset);
+                               }
+                       }
+               }
                return ERROR_OK;
        }
        /* DSB */
                return ERROR_OK;
        }
        /* DSB */

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)