Make sure the user is aware he can lock the device though unlock is not
possible without access to MDM-AP.
Change-Id: I92676530e95d19489c6739748a99c2895849f90f
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4403
Tested-by: jenkins
+if {[using_hla]} {
+ echo ""
+ echo "!!!!!!!!!!!!!!!!!!!!!! WARNING !!!!!!!!!!!!!!!!! WARNING !!!!!!!!!!!!!!!!!!!!!!"
+ echo " Kinetis MCUs have a MDM-AP dedicated mainly to MCU security related functions."
+ echo " A high level adapter (like a ST-Link) you are currently using cannot access"
+ echo " the MDM-AP, so commands like 'mdm mass_erase' are not available in your"
+ echo " configuration. Also security locked state of the device will not be reported."
+ echo ""
+ echo " Be very careful as you can lock the device though there is no way to unlock"
+ echo " it without mass erase. Don't set write protection on the first block."
+ echo "!!!!!!!!!!!!!!!!!!!!!! WARNING !!!!!!!!!!!!!!!!! WARNING !!!!!!!!!!!!!!!!!!!!!!"
+ echo ""
+} {
# Detect secured MCU or boot lock-up in RESET/WDOG loop
$_CHIPNAME.cpu configure -event examine-start {
kinetis mdm check_security
# Detect secured MCU or boot lock-up in RESET/WDOG loop
$_CHIPNAME.cpu configure -event examine-start {
kinetis mdm check_security
+if {[using_hla]} {
+ echo ""
+ echo "!!!!!!!!!!!!!!!!!!!!!! WARNING !!!!!!!!!!!!!!!!! WARNING !!!!!!!!!!!!!!!!!!!!!!"
+ echo " Kinetis MCUs have a MDM-AP dedicated mainly to MCU security related functions."
+ echo " A high level adapter (like a ST-Link) you are currently using cannot access"
+ echo " the MDM-AP, so commands like 'mdm mass_erase' are not available in your"
+ echo " configuration. Also security locked state of the device will not be reported."
+ echo " Expect problems connecting to a blank device without boot ROM."
+ echo ""
+ echo " Be very careful as you can lock the device though there is no way to unlock"
+ echo " it without mass erase. Don't set write protection on the first block."
+ echo "!!!!!!!!!!!!!!!!!!!!!! WARNING !!!!!!!!!!!!!!!!! WARNING !!!!!!!!!!!!!!!!!!!!!!"
+ echo ""
+} {
# Detect secured MCU or boot lock-up in RESET/WDOG loop
$_CHIPNAME.cpu configure -event examine-start {
kinetis mdm check_security
# Detect secured MCU or boot lock-up in RESET/WDOG loop
$_CHIPNAME.cpu configure -event examine-start {
kinetis mdm check_security
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)