nrf51: refine and extend known devices table 93/2593/3
authorPeter A. Bigot <pab@pabigot.com>
Tue, 10 Mar 2015 13:44:28 +0000 (08:44 -0500)
committerPaul Fertser <fercerpav@gmail.com>
Sun, 17 May 2015 20:18:14 +0000 (21:18 +0100)
The notation Gx0 in the nRF51 Series Compatibility Matrix indicates that
the specified HWID is valid only for build code 0 of each chip, and for
subsequent builds the HWID will be different.  Replace the Gx0 notation
with G0 throughout, and add the missing HWID for nRF51422 QFAC A1
(present on the newer nRF51 developer boards).

See: https://www.nordicsemi.com/eng/nordic/download_resource/41917/5/55913589
See: https://devzone.nordicsemi.com/question/30774/mapping-hwid-to-revision-information/

Change-Id: I79d842137d41342db35904867c48b06fbc6fbc70
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Angus Gratton <gus@projectgus.com>
Reviewed-on: http://openocd.zylin.com/2593
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
src/flash/nor/nrf51.c

index 351a86e49cc0543b1c72ecd905c343132bffea56..7c2fa13f55844e57bd96670ca7ff7abd3585e9f0 100644 (file)
@@ -128,6 +128,18 @@ struct nrf51_device_spec {
        unsigned int flash_size_kb;
 };
 
+/* The known devices table below is derived from the "nRF51 Series
+ * Compatibility Matrix" document, which can be found by searching for
+ * ATTN-51 on the Nordic Semi website:
+ *
+ * http://www.nordicsemi.com/eng/content/search?SearchText=ATTN-51
+ *
+ * Up to date with Matrix v2.0, plus some additional HWIDs.
+ *
+ * The additional HWIDs apply where the build code in the matrix is
+ * shown as Gx0, Bx0, etc. In these cases the HWID in the matrix is
+ * for x==0, x!=0 means different (unspecified) HWIDs.
+ */
 static const struct nrf51_device_spec nrf51_known_devices_table[] = {
        /* nRF51822 Devices (IC rev 1). */
        {
@@ -177,13 +189,13 @@ static const struct nrf51_device_spec nrf51_known_devices_table[] = {
        {
                .hwid           = 0x003C,
                .variant        = "QFAA",
-               .build_code     = "Gx0",
+               .build_code     = "G0",
                .flash_size_kb  = 256,
        },
        {
                .hwid           = 0x004C,
                .variant        = "QFAB",
-               .build_code     = "Bx0",
+               .build_code     = "B0",
                .flash_size_kb  = 128,
        },
        {
@@ -209,37 +221,37 @@ static const struct nrf51_device_spec nrf51_known_devices_table[] = {
        {
                .hwid           = 0x0072,
                .variant        = "QFAA",
-               .build_code     = "Hx0",
+               .build_code     = "H0",
                .flash_size_kb  = 256,
        },
        {
                .hwid           = 0x007B,
                .variant        = "QFAB",
-               .build_code     = "Cx0",
+               .build_code     = "C0",
                .flash_size_kb  = 128,
        },
        {
                .hwid           = 0x0083,
                .variant        = "QFAC",
-               .build_code     = "Ax0",
+               .build_code     = "A0",
                .flash_size_kb  = 256,
        },
        {
                .hwid           = 0x007D,
                .variant        = "CDAB",
-               .build_code     = "Ax0",
+               .build_code     = "A0",
                .flash_size_kb  = 128,
        },
        {
                .hwid           = 0x0079,
                .variant        = "CEAA",
-               .build_code     = "Ex0",
+               .build_code     = "E0",
                .flash_size_kb  = 256,
        },
        {
                .hwid           = 0x0087,
                .variant        = "CFAC",
-               .build_code     = "Ax0",
+               .build_code     = "A0",
                .flash_size_kb  = 256,
        },
 
@@ -273,7 +285,7 @@ static const struct nrf51_device_spec nrf51_known_devices_table[] = {
        {
                .hwid           = 0x002E,
                .variant        = "QFAA",
-               .build_code     = "Ex0",
+               .build_code     = "E0",
                .flash_size_kb  = 256,
        },
        {
@@ -285,7 +297,7 @@ static const struct nrf51_device_spec nrf51_known_devices_table[] = {
        {
                .hwid           = 0x0050,
                .variant        = "CEAA",
-               .build_code     = "Bx0",
+               .build_code     = "B0",
                .flash_size_kb  = 256,
        },
 
@@ -293,37 +305,43 @@ static const struct nrf51_device_spec nrf51_known_devices_table[] = {
        {
                .hwid           = 0x0073,
                .variant        = "QFAA",
-               .build_code     = "Fx0",
+               .build_code     = "F0",
                .flash_size_kb  = 256,
        },
        {
                .hwid           = 0x007C,
                .variant        = "QFAB",
-               .build_code     = "Bx0",
+               .build_code     = "B0",
                .flash_size_kb  = 128,
        },
        {
                .hwid           = 0x0085,
                .variant        = "QFAC",
-               .build_code     = "Ax0",
+               .build_code     = "A0",
+               .flash_size_kb  = 256,
+       },
+       {
+               .hwid           = 0x0086,
+               .variant        = "QFAC",
+               .build_code     = "A1",
                .flash_size_kb  = 256,
        },
        {
                .hwid           = 0x007E,
                .variant        = "CDAB",
-               .build_code     = "Ax0",
+               .build_code     = "A0",
                .flash_size_kb  = 128,
        },
        {
                .hwid           = 0x007A,
                .variant        = "CEAA",
-               .build_code     = "Cx0",
+               .build_code     = "C0",
                .flash_size_kb  = 256,
        },
        {
                .hwid           = 0x0088,
                .variant        = "CFAC",
-               .build_code     = "Ax0",
+               .build_code     = "A0",
                .flash_size_kb  = 256,
        },
 

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)