# Nonstandard --prefix and/or --exec-prefix
# We have an override of some sort.
# use build specific install library dir
-
+
LDFLAGS="$LDFLAGS -L$OCDxprefix/lib"
# RPATH becomes an issue on Linux only
if test $host_os = linux-gnu || test $host_os = linux ; then
The option: --with-ftd2xx=<PATH> has been removed.
On Linux, the new option is:
-
+
--with-ftd2xx-linux-tardir=/path/to/files
Where <path> is the path the the directory where the "tar.gz" file
AC_ARG_ENABLE(verbose,
AS_HELP_STRING([--enable-verbose],
- [Enable verbose JTAG I/O messages (for debugging).]),
+ [Enable verbose JTAG I/O messages (for debugging).]),
[
debug_jtag_io=$enableval
debug_usb_io=$enableval
AC_ARG_ENABLE(verbose_jtag_io,
AS_HELP_STRING([--enable-verbose-jtag-io],
- [Enable verbose JTAG I/O messages (for debugging).]),
+ [Enable verbose JTAG I/O messages (for debugging).]),
[debug_jtag_io=$enableval], [])
AC_ARG_ENABLE(verbose_usb_io,
AS_HELP_STRING([--enable-verbose-usb-io],
- [Enable verbose USB I/O messages (for debugging)]),
+ [Enable verbose USB I/O messages (for debugging)]),
[debug_usb_io=$enableval], [])
AC_ARG_ENABLE(verbose_usb_comms,
AS_HELP_STRING([--enable-verbose-usb-comms],
- [Enable verbose USB communication messages (for debugging)]),
+ [Enable verbose USB communication messages (for debugging)]),
[debug_usb_comms=$enableval], [])
AC_MSG_CHECKING([whether to enable verbose JTAG I/O messages]);
debug_malloc=no
AC_ARG_ENABLE(malloc_logging,
AS_HELP_STRING([--enable-malloc-logging],
- [Include free space in logging messages (requires malloc.h).]),
+ [Include free space in logging messages (requires malloc.h).]),
[debug_malloc=$enableval], [])
AC_MSG_CHECKING([whether to enable malloc free space logging]);
AC_ARG_ENABLE(dummy,
- AS_HELP_STRING([--enable-dummy], [Enable building the dummy port driver]),
+ AS_HELP_STRING([--enable-dummy], [Enable building the dummy port driver]),
[build_dummy=$enableval], [build_dummy=no])
AC_ARG_ENABLE(parport,
- AS_HELP_STRING([--enable-parport], [Enable building the pc parallel port driver]),
+ AS_HELP_STRING([--enable-parport], [Enable building the pc parallel port driver]),
[build_parport=$enableval], [build_parport=no])
AC_ARG_ENABLE(parport_ppdev,
AS_HELP_STRING([--disable-parport-ppdev],
- [Disable use of ppdev (/dev/parportN) for parport (for x86 only)]),
+ [Disable use of ppdev (/dev/parportN) for parport (for x86 only)]),
[parport_use_ppdev=$enableval], [parport_use_ppdev=yes])
AC_ARG_ENABLE(parport_giveio,
AS_HELP_STRING([--enable-parport-giveio],
- [Enable use of giveio for parport (for CygWin only)]),
+ [Enable use of giveio for parport (for CygWin only)]),
[parport_use_giveio=$enableval], [parport_use_giveio=])
-
+
AC_ARG_ENABLE(ft2232_libftdi,
- AS_HELP_STRING([--enable-ft2232_libftdi], [Enable building support for FT2232 based devices using the libftdi driver, opensource alternate of FTD2XX]),
+ AS_HELP_STRING([--enable-ft2232_libftdi], [Enable building support for FT2232 based devices using the libftdi driver, opensource alternate of FTD2XX]),
[build_ft2232_libftdi=$enableval], [build_ft2232_libftdi=no])
AC_ARG_ENABLE(ft2232_ftd2xx,
- AS_HELP_STRING([--enable-ft2232_ftd2xx], [Enable building support for FT2232 based devices using the FTD2XX driver from ftdichip.com]),
+ AS_HELP_STRING([--enable-ft2232_ftd2xx], [Enable building support for FT2232 based devices using the FTD2XX driver from ftdichip.com]),
[build_ft2232_ftd2xx=$enableval], [build_ft2232_ftd2xx=no])
-AC_ARG_ENABLE(ftd2xx_highspeed,
- AS_HELP_STRING([--enable-ftd2xx-highspeed], [Enable building support for FT2232H and FT4232H-based devices (requires >=libftd2xx-0.4.16)]),
- [want_ftd2xx_highspeed=$enableval], [want_ftd2xx_highspeed=no])
-
+AC_ARG_ENABLE(ft2232_highspeed,
+ AS_HELP_STRING([--enable-ft2232-highspeed], [Enable building support for FT2232H and FT4232H-based devices (requires >=libftd2xx-0.4.16 or >=libftdi-0.16)]),
+ [want_ft2232_highspeed=$enableval], [want_ft2232_highspeed=no])
+
AC_ARG_ENABLE(amtjtagaccel,
- AS_HELP_STRING([--enable-amtjtagaccel], [Enable building the Amontec JTAG-Accelerator driver]),
+ AS_HELP_STRING([--enable-amtjtagaccel], [Enable building the Amontec JTAG-Accelerator driver]),
[build_amtjtagaccel=$enableval], [build_amtjtagaccel=no])
AC_ARG_ENABLE(ecosboard,
- AS_HELP_STRING([--enable-ecosboard], [Enable building support for eCos based JTAG debugger]),
+ AS_HELP_STRING([--enable-ecosboard], [Enable building support for eCos based JTAG debugger]),
[build_ecosboard=$enableval], [build_ecosboard=no])
AC_ARG_ENABLE(zy1000,
- AS_HELP_STRING([--enable-zy1000], [Enable ZY1000 interface]),
+ AS_HELP_STRING([--enable-zy1000], [Enable ZY1000 interface]),
[build_zy1000=$enableval], [build_zy1000=no])
AC_ARG_ENABLE(ioutil,
- AS_HELP_STRING([--enable-ioutil], [Enable ioutil functions - useful for standalone OpenOCD implementations]),
+ AS_HELP_STRING([--enable-ioutil], [Enable ioutil functions - useful for standalone OpenOCD implementations]),
[build_ioutil=$enableval], [build_ioutil=no])
AC_ARG_ENABLE(httpd,
- AS_HELP_STRING([--enable-httpd], [Enable builtin httpd server - useful for standalone OpenOCD implementations]),
+ AS_HELP_STRING([--enable-httpd], [Enable builtin httpd server - useful for standalone OpenOCD implementations]),
[build_httpd=$enableval], [build_httpd=no])
-case "${host_cpu}" in
+case "${host_cpu}" in
arm*)
AC_ARG_ENABLE(ep93xx,
- AS_HELP_STRING([--enable-ep93xx], [Enable building support for EP93xx based SBCs]),
+ AS_HELP_STRING([--enable-ep93xx], [Enable building support for EP93xx based SBCs]),
[build_ep93xx=$enableval], [build_ep93xx=no])
AC_ARG_ENABLE(at91rm9200,
AS_HELP_STRING([--enable-at91rm9200], [Enable building support for AT91RM9200 based SBCs]),
[build_at91rm9200=$enableval], [build_at91rm9200=no])
;;
-
- *)
+
+ *)
build_ep93xx=no
build_at91rm9200=no
;;
AC_MSG_RESULT([yes])
fi
-case "${host_cpu}" in
+case "${host_cpu}" in
i?86|x86*)
;;
- *)
+ *)
if test x$parport_use_ppdev = xno; then
AC_MSG_WARN([--disable-parport-ppdev is not supported by the host CPU])
fi
;;
esac
-case $host in
- *-cygwin*)
+case $host in
+ *-cygwin*)
is_win32=yes
parport_use_ppdev=no
AC_CHECK_HEADERS(sys/io.h,[],AC_MSG_ERROR([Please install the cygwin ioperm package]))
fi
fi
-
+
AC_DEFINE(IS_WIN32, 1, [1 if building for Win32.])
AC_DEFINE(IS_DARWIN, 0, [0 if not building for Darwin.])
- ;;
- *-mingw*)
+ ;;
+ *-mingw*)
is_mingw=yes
is_win32=yes
parport_use_ppdev=no
AC_DEFINE(IS_MINGW, 1, [1 if building for MinGW.])
AC_DEFINE(IS_WIN32, 1, [1 if building for Win32.])
AC_DEFINE(IS_DARWIN, 0, [0 if not building for Darwin.])
- ;;
+ ;;
*darwin*)
is_darwin=yes
AC_DEFINE(IS_WIN32, 0, [0 if not building for Win32.])
AC_DEFINE(IS_DARWIN, 1, [1 if building for Darwin.])
;;
- *)
+ *)
if test x$parport_use_giveio = xyes; then
AC_MSG_WARN([--enable-parport-giveio cannot be used by ]$host[ hosts])
fi
])
AC_MSG_CHECKING([whether to build ftd2xx highspeed device support])
-AC_MSG_RESULT([$want_ftd2xx_highspeed])
-if test $want_ftd2xx_highspeed != no; then
+AC_MSG_RESULT([$want_ft2232_highspeed])
+if test $want_ft2232_highspeed != no; then
AC_MSG_CHECKING([for ftd2xx highspeed device support])
AC_COMPILE_IFELSE([
#include "confdefs.h"
#include <ftd2xx.h>
DWORD x = FT_DEVICE_4232H;
], [
- AC_DEFINE(BUILD_FTD2XX_HIGHSPEED, [1],
- [Support FT2232H/FT4232HS with FTD2XX.])
- build_ftd2xx_highspeed=yes
+ AC_DEFINE(BUILD_FT2232_HIGHSPEED, [1],
+ [Support FT2232H/FT4232HS with FTD2XX or libftdi.])
+ build_ft2232_highspeed=yes
], [
- build_ftd2xx_highspeed=no
+ build_ft2232_highspeed=no
])
- AC_MSG_RESULT([$build_ftd2xx_highspeed])
+ AC_MSG_RESULT([$build_ft2232_highspeed])
- if test $want_ftd2xx_highspeed = yes -a $build_ftd2xx_highspeed = no; then
+ if test $want_ft2232_highspeed = yes -a $build_ft2232_highspeed = no; then
AC_MSG_ERROR([You need a newer FTD2XX driver (version 0.4.16 or later).])
fi
fi
# We assume: the package is preinstalled in the proper place
# these present as 2 libraries..
LIBS="$LIBS -lftdi -lusb"
- #
+ #
# Try to build a small program.
AC_MSG_CHECKING([Build & Link with libftdi...])
AC_MSG_RESULT([Skipping as we are cross-compiling])
])
+ AC_MSG_CHECKING([whether to build libftdi highspeed device support])
+ AC_MSG_RESULT([$want_ft2232_highspeed])
+ if test $want_ft2232_highspeed != no; then
+ AC_MSG_CHECKING([for libftdi highspeed device support])
+ AC_COMPILE_IFELSE([
+#include <stdio.h>
+#include <ftdi.h>
+enum ftdi_chip_type x = TYPE_2232H;
+ ], [
+ AC_DEFINE(BUILD_FT2232_HIGHSPEED, [1],
+ [Support FT2232H/FT4232HS with FTD2XX or libftdi.])
+ build_ft2232_highspeed=yes
+ ], [
+ build_ft2232_highspeed=no
+ ])
+ AC_MSG_RESULT([$build_ft2232_highspeed])
+
+ if test $want_ft2232_highspeed = yes -a $build_ft2232_highspeed = no; then
+ AC_MSG_ERROR([You need a newer libftdi version (0.16 or later).])
+ fi
+ fi
+
# Restore the 'unexpanded ldflags'
LDFLAGS=$LDFLAGS_SAVE
CFLAGS=$CFLAGS_SAVE
# check for usb.h when a driver will require it
if test $build_jlink = yes -o $build_vsllink = yes -o $build_usbprog = yes -o \
$build_rlink = yes -o $build_armjtagew = yes
-then
+then
AC_CHECK_HEADERS([usb.h],[],
[AC_MSG_ERROR([usb.h is required to build some OpenOCD driver(s)])])
fi
])
if test "${has_environ}" != "yes" ; then
- AC_MSG_FAILURE([Could not find 'environ' in unistd.h or available libraries.])
+ AC_MSG_FAILURE([Could not find 'environ' in unistd.h or available libraries.])
fi
AC_DEFINE([_GNU_SOURCE],[1],[Use GNU C library extensions (e.g. stdndup).])
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
***************************************************************************/
-
/* This code uses information contained in the MPSSE specification which was
* found here:
* http://www.ftdichip.com/Documents/AppNotes/AN2232C-01_MPSSE_Cmnd.pdf
* http://www.ftdichip.com/Documents/DataSheets/DS_FT2232D.pdf
*/
-
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
/* max TCK for the high speed devices 30000 kHz */
#define FTDI_2232H_4232H_MAX_TCK 30000
+/* max TCK for the full speed devices 6000 kHz */
+#define FTDI_2232C_MAX_TCK 6000
+/* this speed value tells that RTCK is requested */
+#define RTCK_SPEED -1
static int ft2232_execute_queue(void);
static int ft2232_handle_vid_pid_command(struct command_context_s* cmd_ctx, char* cmd, char** args, int argc);
static int ft2232_handle_latency_command(struct command_context_s* cmd_ctx, char* cmd, char** args, int argc);
-
/**
* Send out \a num_cycles on the TCK line while the TAP(s) are in a
* stable state. Calling code must ensure that current state is stable,
*/
static int ft2232_stableclocks(int num_cycles, jtag_command_t* cmd);
-/* max TCK for the high speed devices 30000 kHz */
-#define FTDI_2232H_4232H_MAX_TCK 30000
-
static char * ft2232_device_desc_A = NULL;
static char* ft2232_device_desc = NULL;
static char* ft2232_serial = NULL;
static char* ft2232_layout = NULL;
static uint8_t ft2232_latency = 2;
-static unsigned ft2232_max_tck = 6000;
-
+static unsigned ft2232_max_tck = FTDI_2232C_MAX_TCK;
#define MAX_USB_IDS 8
/* vid = pid = 0 marks the end of the list */
static FT_DEVICE ftdi_device = 0;
#elif BUILD_FT2232_LIBFTDI == 1
static struct ftdi_context ftdic;
+static enum ftdi_chip_type ftdi_device;
#endif
-
static jtag_command_t* first_unsent; /* next command that has to be sent */
static int require_send;
-
/* http://urjtag.wiki.sourceforge.net/Cable + FT2232 says:
"There is a significant difference between libftdi and libftd2xx. The latter
return ft2232_buffer[ft2232_read_pointer++];
}
-
/**
* Clocks out \a bit_count bits on the TMS line, starting with the least
* significant bit of tms_bits and progressing to more significant bits.
assert(tms_count > 0);
-// LOG_DEBUG("mpsse cmd=%02x, tms_bits = 0x%08x, bit_count=%d", mpsse_cmd, tms_bits, tms_count);
+#if 0
+ LOG_DEBUG("mpsse cmd=%02x, tms_bits = 0x%08x, bit_count=%d", mpsse_cmd, tms_bits, tms_count);
+#endif
for (tms_byte = tms_ndx = i = 0; i < tms_count; ++i, tms_bits>>=1)
{
}
}
-
/**
* Function get_tms_buffer_requirements
* returns what clock_tms() will consume if called with
return ((bit_count + 6)/7) * 3;
}
-
/**
* Function move_to_state
* moves the TAP controller from the current state to a
clock_tms(0x4b, tms_bits, tms_count, 0);
}
-
jtag_interface_t ft2232_interface =
{
.name = "ft2232",
{
#if BUILD_FT2232_FTD2XX == 1
FT_STATUS status;
- DWORD dw_bytes_written;
+ DWORD dw_bytes_written;
if ((status = FT_Write(ftdih, buf, size, &dw_bytes_written)) != FT_OK)
{
*bytes_written = dw_bytes_written;
#endif
}
-
static int ft2232_read(uint8_t* buf, uint32_t size, uint32_t* bytes_read)
{
#if BUILD_FT2232_FTD2XX == 1
- DWORD dw_bytes_read;
+ DWORD dw_bytes_read;
FT_STATUS status;
- int timeout = 5;
+ int timeout = 5;
*bytes_read = 0;
while ((*bytes_read < size) && timeout--)
return ERROR_OK;
}
-#ifdef BUILD_FTD2XX_HIGHSPEED
static bool ft2232_device_is_highspeed(void)
{
+#ifdef BUILD_FT2232_HIGHSPEED
+ #if BUILD_FT2232_FTD2XX == 1
return (ftdi_device == FT_DEVICE_2232H) || (ftdi_device == FT_DEVICE_4232H);
+ #elif BUILD_FT2232_LIBFTDI == 1
+ return (ftdi_device == TYPE_2232H || ftdi_device == TYPE_4232H);
+ #endif
+#else
+ return false;
+#endif
}
-static int ft2232_adaptive_clocking(int speed)
-{
- bool use_adaptive_clocking = FALSE;
- if (0 == speed)
- {
- if (ft2232_device_is_highspeed())
- use_adaptive_clocking = TRUE;
- else
- {
- LOG_ERROR("ft2232 device %lu does not support RTCK", ftdi_device);
- return ERROR_OK;
- }
- }
+/*
+ * Commands that only apply to the FT2232H and FT4232H devices.
+ * See chapter 6 in http://www.ftdichip.com/Documents/AppNotes/
+ * AN_108_Command_Processor_for_MPSSE_and_MCU_Host_Bus_Emulation_Modes.pdf
+ */
- uint8_t buf = use_adaptive_clocking ? 0x96 : 0x97;
+static int ft2232h_ft4232h_adaptive_clocking(bool enable)
+{
+ uint8_t buf = enable ? 0x96 : 0x97;
LOG_DEBUG("%2.2x", buf);
uint32_t bytes_written;
int retval = ft2232_write(&buf, 1, &bytes_written);
- if (ERROR_OK != retval || bytes_written != 1)
+ if ((ERROR_OK != retval) || (bytes_written != 1))
{
- LOG_ERROR("unable to set adative clocking: %d", retval);
+ LOG_ERROR("couldn't write command to %s adaptive clocking"
+ , enable ? "enable" : "disable");
return retval;
}
return ERROR_OK;
}
-#else
-static int ft2232_adaptive_clocking(int speed)
+
+/**
+ * Enable/disable the clk divide by 5 of the 60MHz master clock.
+ * This result in a JTAG clock speed range of 91.553Hz-6MHz
+ * respective 457.763Hz-30MHz.
+ */
+static int ft2232h_ft4232h_clk_divide_by_5(bool enable)
{
- // not implemented on low-speed devices
- return speed ? ERROR_OK : -1234;
+ uint32_t bytes_written;
+ uint8_t buf = enable ? 0x8b : 0x8a;
+ int retval = ft2232_write(&buf, 1, &bytes_written);
+ if ((ERROR_OK != retval) || (bytes_written != 1))
+ {
+ LOG_ERROR("couldn't write command to %s clk divide by 5"
+ , enable ? "enable" : "disable");
+ return ERROR_JTAG_INIT_FAILED;
+ }
+ ft2232_max_tck = enable ? FTDI_2232C_MAX_TCK : FTDI_2232H_4232H_MAX_TCK;
+ LOG_INFO("max TCK change to: %u kHz", ft2232_max_tck);
+
+ return ERROR_OK;
}
-#endif
static int ft2232_speed(int speed)
{
- uint8_t buf[3];
+ uint8_t buf[3];
int retval;
uint32_t bytes_written;
- ft2232_adaptive_clocking(speed);
+ retval = ERROR_OK;
+ bool enable_adaptive_clocking = (RTCK_SPEED == speed);
+ if (ft2232_device_is_highspeed())
+ retval = ft2232h_ft4232h_adaptive_clocking(enable_adaptive_clocking);
+ else if (enable_adaptive_clocking)
+ {
+ LOG_ERROR("ft2232 device %lu does not support RTCK"
+ , (long unsigned int)ftdi_device);
+ return ERROR_FAIL;
+ }
+
+ if ((enable_adaptive_clocking) || (ERROR_OK != retval))
+ return retval;
- buf[0] = 0x86; /* command "set divisor" */
- buf[1] = speed & 0xff; /* valueL (0 = 6MHz, 1 = 3MHz, 2 = 2.0MHz, ...*/
- buf[2] = (speed >> 8) & 0xff; /* valueH */
+ buf[0] = 0x86; /* command "set divisor" */
+ buf[1] = speed & 0xff; /* valueL (0 = 6MHz, 1 = 3MHz, 2 = 2.0MHz, ...*/
+ buf[2] = (speed >> 8) & 0xff; /* valueH */
LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
if (((retval = ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3))
return ERROR_OK;
}
-
static int ft2232_speed_div(int speed, int* khz)
{
/* Take a look in the FT2232 manual,
* AN2232C-01 Command Processor for
* MPSSE and MCU Host Bus. Chapter 3.8 */
- *khz = ft2232_max_tck / (1 + speed);
+ *khz = (RTCK_SPEED == speed) ? 0 : ft2232_max_tck / (1 + speed);
return ERROR_OK;
}
-
static int ft2232_khz(int khz, int* jtag_speed)
{
if (khz == 0)
{
-#ifdef BUILD_FTD2XX_HIGHSPEED
- *jtag_speed = 0;
- return ERROR_OK;
-#else
- LOG_DEBUG("RCLK not supported");
- LOG_DEBUG("If you have a high-speed FTDI device, then "
- "OpenOCD may be built with --enable-ftd2xx-highspeed.");
- return ERROR_FAIL;
+ if (ft2232_device_is_highspeed())
+ {
+ *jtag_speed = RTCK_SPEED;
+ return ERROR_OK;
+ }
+ else
+ {
+ LOG_DEBUG("RCLK not supported");
+#ifndef BUILD_FT2232_HIGHSPEED
+ LOG_DEBUG("If you have a high-speed FTDI device, then "
+ "OpenOCD may be built with --enable-ft2232-highspeed.");
#endif
+ return ERROR_FAIL;
+ }
}
/* Take a look in the FT2232 manual,
return ERROR_OK;
}
-
static int ft2232_register_commands(struct command_context_s* cmd_ctx)
{
register_command(cmd_ctx, NULL, "ft2232_device_desc", ft2232_handle_device_desc_command,
return ERROR_OK;
}
-
static void ft2232_end_state(tap_state_t state)
{
if (tap_is_state_stable(state))
buffer[cur_byte] = (buffer[cur_byte] | (((buffer_read()) << 1) & 0x80)) >> (8 - bits_left);
}
-
static void ft2232_debug_dump_buffer(void)
{
- int i;
- char line[256];
+ int i;
+ char line[256];
char* line_p = line;
for (i = 0; i < ft2232_buffer_size; i++)
LOG_DEBUG("%s", line);
}
-
static int ft2232_send_and_recv(jtag_command_t* first, jtag_command_t* last)
{
jtag_command_t* cmd;
- uint8_t* buffer;
- int scan_size;
+ uint8_t* buffer;
+ int scan_size;
enum scan_type type;
- int retval;
- uint32_t bytes_written = 0;
- uint32_t bytes_read = 0;
+ int retval;
+ uint32_t bytes_written = 0;
+ uint32_t bytes_read = 0;
#ifdef _DEBUG_USB_IO_
struct timeval start, inter, inter2, end;
return retval;
}
-
/**
* Function ft2232_add_pathmove
* moves the TAP controller from the current state to a new state through the
tap_set_end_state(tap_get_state());
}
-
static void ft2232_add_scan(bool ir_scan, enum scan_type type, uint8_t* buffer, int scan_size)
{
int num_bytes = (scan_size + 7) / 8;
}
}
-
static int ft2232_large_scan(scan_command_t* cmd, enum scan_type type, uint8_t* buffer, int scan_size)
{
int num_bytes = (scan_size + 7) / 8;
return ERROR_OK;
}
-
static int ft2232_predict_scan_out(int scan_size, enum scan_type type)
{
int predicted_size = 3;
if (tap_get_state() != TAP_DRSHIFT)
predicted_size += get_tms_buffer_requirements(tap_get_tms_path_len(tap_get_state(), TAP_DRSHIFT));
- if (type == SCAN_IN) /* only from device to host */
+ if (type == SCAN_IN) /* only from device to host */
{
/* complete bytes */
predicted_size += CEIL(num_bytes, 65536) * 3;
/* remaining bits - 1 (up to 7) */
predicted_size += ((scan_size - 1) % 8) ? 2 : 0;
}
- else /* host to device, or bidirectional */
+ else /* host to device, or bidirectional */
{
/* complete bytes */
predicted_size += num_bytes + CEIL(num_bytes, 65536) * 3;
return predicted_size;
}
-
static int ft2232_predict_scan_in(int scan_size, enum scan_type type)
{
int predicted_size = 0;
return predicted_size;
}
-
static void usbjtag_reset(int trst, int srst)
{
enum reset_types jtag_reset_config = jtag_get_reset_config();
if (trst == 1)
{
if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
- low_direction |= nTRSTnOE; /* switch to output pin (output is low) */
+ low_direction |= nTRSTnOE; /* switch to output pin (output is low) */
else
- low_output &= ~nTRST; /* switch output low */
+ low_output &= ~nTRST; /* switch output low */
}
else if (trst == 0)
{
if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
- low_direction &= ~nTRSTnOE; /* switch to input pin (high-Z + internal and external pullup) */
+ low_direction &= ~nTRSTnOE; /* switch to input pin (high-Z + internal and external pullup) */
else
- low_output |= nTRST; /* switch output high */
+ low_output |= nTRST; /* switch output high */
}
if (srst == 1)
{
if (jtag_reset_config & RESET_SRST_PUSH_PULL)
- low_output &= ~nSRST; /* switch output low */
+ low_output &= ~nSRST; /* switch output low */
else
- low_direction |= nSRSTnOE; /* switch to output pin (output is low) */
+ low_direction |= nSRSTnOE; /* switch to output pin (output is low) */
}
else if (srst == 0)
{
if (jtag_reset_config & RESET_SRST_PUSH_PULL)
- low_output |= nSRST; /* switch output high */
+ low_output |= nSRST; /* switch output high */
else
- low_direction &= ~nSRSTnOE; /* switch to input pin (high-Z) */
+ low_direction &= ~nSRSTnOE; /* switch to input pin (high-Z) */
}
/* command "set data bits low byte" */
buffer_write(low_direction);
}
-
static void jtagkey_reset(int trst, int srst)
{
enum reset_types jtag_reset_config = jtag_get_reset_config();
high_direction);
}
-
static void olimex_jtag_reset(int trst, int srst)
{
enum reset_types jtag_reset_config = jtag_get_reset_config();
high_direction);
}
-
static void axm0432_jtag_reset(int trst, int srst)
{
if (trst == 1)
high_direction);
}
-
static void flyswatter_reset(int trst, int srst)
{
if (trst == 1)
LOG_DEBUG("trst: %i, srst: %i, low_output: 0x%2.2x, low_direction: 0x%2.2x", trst, srst, low_output, low_direction);
}
-
static void turtle_reset(int trst, int srst)
{
trst = trst;
LOG_DEBUG("srst: %i, low_output: 0x%2.2x, low_direction: 0x%2.2x", srst, low_output, low_direction);
}
-
static void comstick_reset(int trst, int srst)
{
if (trst == 1)
high_direction);
}
-
static void stm32stick_reset(int trst, int srst)
{
if (trst == 1)
high_direction);
}
-
-
static void sheevaplug_reset(int trst, int srst)
{
if (trst == 1)
static int ft2232_execute_runtest(jtag_command_t *cmd)
{
- int retval;
- int i;
+ int retval;
+ int i;
int predicted_size = 0;
retval = ERROR_OK;
return retval;
}
-
static int ft2232_execute_statemove(jtag_command_t *cmd)
{
int predicted_size = 0;
DEBUG_JTAG_IO("pathmove: %i states, current: %s end: %s", num_states,
tap_state_name(tap_get_state()),
- tap_state_name(path[num_states-1])
-);
+ tap_state_name(path[num_states-1]));
/* only send the maximum buffer size that FT2232C can handle */
predicted_size = 3 * CEIL(num_states, 7);
return retval;
}
-
static int ft2232_execute_scan(jtag_command_t *cmd)
{
- uint8_t* buffer;
- int scan_size; /* size of IR or DR scan */
- int predicted_size = 0;
- int retval = ERROR_OK;
+ uint8_t* buffer;
+ int scan_size; /* size of IR or DR scan */
+ int predicted_size = 0;
+ int retval = ERROR_OK;
enum scan_type type = jtag_scan_type(cmd->cmd.scan);
static int ft2232_execute_reset(jtag_command_t *cmd)
{
- int retval;
- int predicted_size = 0;
+ int retval;
+ int predicted_size = 0;
retval = ERROR_OK;
DEBUG_JTAG_IO("reset trst: %i srst %i",
static int ft2232_execute_sleep(jtag_command_t *cmd)
{
- int retval;
+ int retval;
retval = ERROR_OK;
DEBUG_JTAG_IO("sleep %i", cmd->cmd.sleep->us);
static int ft2232_execute_stableclocks(jtag_command_t *cmd)
{
- int retval;
+ int retval;
retval = ERROR_OK;
/* this is only allowed while in a stable state. A check for a stable
static int ft2232_execute_command(jtag_command_t *cmd)
{
- int retval;
+ int retval;
retval = ERROR_OK;
switch (cmd->type)
static int ft2232_execute_queue()
{
- jtag_command_t* cmd = jtag_command_queue; /* currently processed command */
- int retval;
+ jtag_command_t* cmd = jtag_command_queue; /* currently processed command */
+ int retval;
- first_unsent = cmd; /* next command that has to be sent */
+ first_unsent = cmd; /* next command that has to be sent */
require_send = 0;
/* return ERROR_OK, unless ft2232_send_and_recv reports a failed check
return retval;
}
-
#if BUILD_FT2232_FTD2XX == 1
static int ft2232_init_ftd2xx(uint16_t vid, uint16_t pid, int more, int* try_more)
{
status = FT_OpenEx(openex_string, openex_flags, &ftdih);
if (status != FT_OK) {
- // under Win32, the FTD2XX driver appends an "A" to the end
- // of the description, if we tried by the desc, then
- // try by the alternate "A" description.
+ /* under Win32, the FTD2XX driver appends an "A" to the end
+ * of the description, if we tried by the desc, then
+ * try by the alternate "A" description. */
if (openex_string == ft2232_device_desc) {
- // Try the alternate method.
+ /* Try the alternate method. */
openex_string = ft2232_device_desc_A;
status = FT_OpenEx(openex_string, openex_flags, &ftdih);
if (status == FT_OK) {
- // yea, the "alternate" method worked!
+ /* yea, the "alternate" method worked! */
} else {
- // drat, give the user a meaningfull message.
- // telling the use we tried *BOTH* methods.
+ /* drat, give the user a meaningfull message.
+ * telling the use we tried *BOTH* methods. */
LOG_WARNING("Unable to open FTDI Device tried: '%s' and '%s'\n",
ft2232_device_desc,
ft2232_device_desc_A);
}
else
{
- LOG_INFO("device: %lu", ftdi_device);
+ static const char* type_str[] =
+ {"BM", "AM", "100AX", "UNKNOWN", "2232C", "232R", "2232H", "4232H"};
+ unsigned no_of_known_types = sizeof(type_str) / sizeof(type_str[0]) - 1;
+ unsigned type_index = ((unsigned)ftdi_device < no_of_known_types)
+ ? ftdi_device : 3;
+ LOG_INFO("device: %lu \"%s\"", ftdi_device, type_str[type_index]);
LOG_INFO("deviceID: %lu", deviceID);
LOG_INFO("SerialNumber: %s", SerialNumber);
LOG_INFO("Description: %s", Description);
-
-#ifdef BUILD_FTD2XX_HIGHSPEED
- if (ft2232_device_is_highspeed())
- {
- ft2232_max_tck = FTDI_2232H_4232H_MAX_TCK;
- LOG_INFO("max TCK change to: %u kHz", ft2232_max_tck);
- }
-#endif
}
return ERROR_OK;
}
-
static int ft2232_purge_ftd2xx(void)
{
FT_STATUS status;
return ERROR_OK;
}
-
#endif /* BUILD_FT2232_FTD2XX == 1 */
#if BUILD_FT2232_LIBFTDI == 1
ftdi_set_bitmode(&ftdic, 0x0b, 2); /* ctx, JTAG I/O mask */
+ ftdi_device = ftdic.type;
+ static const char* type_str[] =
+ {"AM", "BM", "2232C", "R", "2232H", "4232H", "Unknown"};
+ unsigned no_of_known_types = sizeof(type_str) / sizeof(type_str[0]) - 1;
+ unsigned type_index = ((unsigned)ftdi_device < no_of_known_types)
+ ? ftdi_device : no_of_known_types;
+ LOG_DEBUG("FTDI chip type: %i \"%s\"", (int)ftdi_device, type_str[type_index]);
return ERROR_OK;
}
-
static int ft2232_purge_libftdi(void)
{
if (ftdi_usb_purge_buffers(&ftdic) < 0)
return ERROR_OK;
}
-
#endif /* BUILD_FT2232_LIBFTDI == 1 */
static int ft2232_init(void)
if (layout->init() != ERROR_OK)
return ERROR_JTAG_INIT_FAILED;
+ if (ft2232_device_is_highspeed())
+ {
+ if (ft2232h_ft4232h_clk_divide_by_5(false) != ERROR_OK)
+ return ERROR_JTAG_INIT_FAILED;
+ }
+
ft2232_speed(jtag_get_speed());
buf[0] = 0x85; /* Disconnect TDI/DO to TDO/DI for Loopback */
return ERROR_OK;
}
-
static int usbjtag_init(void)
{
uint8_t buf[3];
return ERROR_OK;
}
-
static int axm0432_jtag_init(void)
{
uint8_t buf[3];
return ERROR_OK;
}
-
static int jtagkey_init(void)
{
uint8_t buf[3];
return ERROR_OK;
}
-
static int olimex_jtag_init(void)
{
uint8_t buf[3];
return ERROR_OK;
}
-
static int flyswatter_init(void)
{
uint8_t buf[3];
return ERROR_OK;
}
-
static int turtle_init(void)
{
uint8_t buf[3];
return ERROR_OK;
}
-
static int comstick_init(void)
{
uint8_t buf[3];
return ERROR_OK;
}
-
static int stm32stick_init(void)
{
uint8_t buf[3];
return ERROR_OK;
}
-
static int sheevaplug_init(void)
{
uint8_t buf[3];
buffer_write(high_direction);
}
-
static void flyswatter_jtag_blink(void)
{
/*
buffer_write(high_direction);
}
-
static void turtle_jtag_blink(void)
{
/*
buffer_write(high_direction);
}
-
static int ft2232_quit(void)
{
#if BUILD_FT2232_FTD2XX == 1
return ERROR_OK;
}
-
static int ft2232_handle_device_desc_command(struct command_context_s* cmd_ctx, char* cmd, char** args, int argc)
{
char *cp;
{
ft2232_device_desc = strdup(args[0]);
cp = strchr(ft2232_device_desc, 0);
- // under Win32, the FTD2XX driver appends an "A" to the end
- // of the description, this examines the given desc
- // and creates the 'missing' _A or non_A variable.
+ /* under Win32, the FTD2XX driver appends an "A" to the end
+ * of the description, this examines the given desc
+ * and creates the 'missing' _A or non_A variable. */
if ((cp[-1] == 'A') && (cp[-2]==' ')) {
- // it was, so make this the "A" version.
+ /* it was, so make this the "A" version. */
ft2232_device_desc_A = ft2232_device_desc;
- // and *CREATE* the non-A version.
+ /* and *CREATE* the non-A version. */
strcpy(buf, ft2232_device_desc);
cp = strchr(buf, 0);
cp[-2] = 0;
ft2232_device_desc = strdup(buf);
} else {
- // <space > A not defined
- // so create it
+ /* <space > A not defined
+ * so create it */
sprintf(buf, "%s A", ft2232_device_desc);
ft2232_device_desc_A = strdup(buf);
}
return ERROR_OK;
}
-
static int ft2232_handle_serial_command(struct command_context_s* cmd_ctx, char* cmd, char** args, int argc)
{
if (argc == 1)
return ERROR_OK;
}
-
static int ft2232_handle_layout_command(struct command_context_s* cmd_ctx, char* cmd, char** args, int argc)
{
if (argc == 0)
return ERROR_OK;
}
-
static int ft2232_handle_vid_pid_command(struct command_context_s* cmd_ctx, char* cmd, char** args, int argc)
{
if (argc > MAX_USB_IDS * 2)
LOG_WARNING("incomplete ft2232_vid_pid configuration directive");
if (argc < 2)
return ERROR_COMMAND_SYNTAX_ERROR;
- // remove the incomplete trailing id
+ /* remove the incomplete trailing id */
argc -= 1;
}
return retval;
}
-
static int ft2232_handle_latency_command(struct command_context_s* cmd_ctx, char* cmd, char** args, int argc)
{
if (argc == 1)
return ERROR_OK;
}
-
static int ft2232_stableclocks(int num_cycles, jtag_command_t* cmd)
{
int retval = 0;
return retval;
}
-
/* ---------------------------------------------------------------------
* Support for IceBear JTAG adapter from Section5:
* http://section5.ch/icebear
Code Review / openocd.git / commitdiff