static int aarch64_mmu(struct target *target, int *enabled);
static int aarch64_virt2phys(struct target *target,
target_addr_t virt, target_addr_t *phys);
-static int aarch64_read_apb_ap_memory(struct target *target,
+static int aarch64_read_cpu_memory(struct target *target,
uint64_t address, uint32_t size, uint32_t count, uint8_t *buffer);
#define foreach_smp_target(pos, head) \
return aarch64_init_debug_access(target);
}
-static int aarch64_write_apb_ap_memory(struct target *target,
+static int aarch64_write_cpu_memory_slow(struct target *target,
+ uint32_t size, uint32_t count, const uint8_t *buffer, uint32_t *dscr)
+{
+ struct armv8_common *armv8 = target_to_armv8(target);
+ struct arm_dpm *dpm = &armv8->dpm;
+ struct arm *arm = &armv8->arm;
+ int retval;
+
+ armv8_reg_current(arm, 1)->dirty = true;
+
+ /* change DCC to normal mode if necessary */
+ if (*dscr & DSCR_MA) {
+ *dscr &= ~DSCR_MA;
+ retval = mem_ap_write_atomic_u32(armv8->debug_ap,
+ armv8->debug_base + CPUV8_DBG_DSCR, *dscr);
+ if (retval != ERROR_OK)
+ return retval;
+ }
+
+ while (count) {
+ uint32_t data, opcode;
+
+ /* write the data to store into DTRRX */
+ if (size == 1)
+ data = *buffer;
+ else if (size == 2)
+ data = target_buffer_get_u16(target, buffer);
+ else
+ data = target_buffer_get_u32(target, buffer);
+ retval = mem_ap_write_atomic_u32(armv8->debug_ap,
+ armv8->debug_base + CPUV8_DBG_DTRRX, data);
+ if (retval != ERROR_OK)
+ return retval;
+
+ if (arm->core_state == ARM_STATE_AARCH64)
+ retval = dpm->instr_execute(dpm, ARMV8_MRS(SYSTEM_DBG_DTRRX_EL0, 1));
+ else
+ retval = dpm->instr_execute(dpm, ARMV4_5_MRC(14, 0, 1, 0, 5, 0));
+ if (retval != ERROR_OK)
+ return retval;
+
+ if (size == 1)
+ opcode = armv8_opcode(armv8, ARMV8_OPC_STRB_IP);
+ else if (size == 2)
+ opcode = armv8_opcode(armv8, ARMV8_OPC_STRH_IP);
+ else
+ opcode = armv8_opcode(armv8, ARMV8_OPC_STRW_IP);
+ retval = dpm->instr_execute(dpm, opcode);
+ if (retval != ERROR_OK)
+ return retval;
+
+ /* Advance */
+ buffer += size;
+ --count;
+ }
+
+ return ERROR_OK;
+}
+
+static int aarch64_write_cpu_memory_fast(struct target *target,
+ uint32_t count, const uint8_t *buffer, uint32_t *dscr)
+{
+ struct armv8_common *armv8 = target_to_armv8(target);
+ struct arm *arm = &armv8->arm;
+ int retval;
+
+ armv8_reg_current(arm, 1)->dirty = true;
+
+ /* Step 1.d - Change DCC to memory mode */
+ *dscr |= DSCR_MA;
+ retval = mem_ap_write_atomic_u32(armv8->debug_ap,
+ armv8->debug_base + CPUV8_DBG_DSCR, *dscr);
+ if (retval != ERROR_OK)
+ return retval;
+
+
+ /* Step 2.a - Do the write */
+ retval = mem_ap_write_buf_noincr(armv8->debug_ap,
+ buffer, 4, count, armv8->debug_base + CPUV8_DBG_DTRRX);
+ if (retval != ERROR_OK)
+ return retval;
+
+ /* Step 3.a - Switch DTR mode back to Normal mode */
+ *dscr &= ~DSCR_MA;
+ retval = mem_ap_write_atomic_u32(armv8->debug_ap,
+ armv8->debug_base + CPUV8_DBG_DSCR, *dscr);
+ if (retval != ERROR_OK)
+ return retval;
+
+ return ERROR_OK;
+}
+
+static int aarch64_write_cpu_memory(struct target *target,
uint64_t address, uint32_t size,
uint32_t count, const uint8_t *buffer)
{
struct armv8_common *armv8 = target_to_armv8(target);
struct arm_dpm *dpm = &armv8->dpm;
struct arm *arm = &armv8->arm;
- int total_bytes = count * size;
- int total_u32;
- int start_byte = address & 0x3;
- int end_byte = (address + total_bytes) & 0x3;
- struct reg *reg;
uint32_t dscr;
- uint8_t *tmp_buff = NULL;
if (target->state != TARGET_HALTED) {
LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
- total_u32 = DIV_ROUND_UP((address & 3) + total_bytes, 4);
-
- /* Mark register R0 as dirty, as it will be used
+ /* Mark register X0 as dirty, as it will be used
* for transferring the data.
* It will be restored automatically when exiting
* debug mode
*/
- reg = armv8_reg_current(arm, 1);
- reg->dirty = true;
-
- reg = armv8_reg_current(arm, 0);
- reg->dirty = true;
+ armv8_reg_current(arm, 0)->dirty = true;
/* This algorithm comes from DDI0487A.g, chapter J9.1 */
- /* The algorithm only copies 32 bit words, so the buffer
- * should be expanded to include the words at either end.
- * The first and last words will be read first to avoid
- * corruption if needed.
- */
- tmp_buff = malloc(total_u32 * 4);
-
- if ((start_byte != 0) && (total_u32 > 1)) {
- /* First bytes not aligned - read the 32 bit word to avoid corrupting
- * the other bytes in the word.
- */
- retval = aarch64_read_apb_ap_memory(target, (address & ~0x3), 4, 1, tmp_buff);
- if (retval != ERROR_OK)
- goto error_free_buff_w;
- }
-
- /* If end of write is not aligned, or the write is less than 4 bytes */
- if ((end_byte != 0) ||
- ((total_u32 == 1) && (total_bytes != 4))) {
-
- /* Read the last word to avoid corruption during 32 bit write */
- int mem_offset = (total_u32-1) * 4;
- retval = aarch64_read_apb_ap_memory(target, (address & ~0x3) + mem_offset, 4, 1, &tmp_buff[mem_offset]);
- if (retval != ERROR_OK)
- goto error_free_buff_w;
- }
-
- /* Copy the write buffer over the top of the temporary buffer */
- memcpy(&tmp_buff[start_byte], buffer, total_bytes);
-
- /* We now have a 32 bit aligned buffer that can be written */
-
/* Read DSCR */
retval = mem_ap_read_atomic_u32(armv8->debug_ap,
armv8->debug_base + CPUV8_DBG_DSCR, &dscr);
if (retval != ERROR_OK)
- goto error_free_buff_w;
+ return retval;
/* Set Normal access mode */
dscr = (dscr & ~DSCR_MA);
/* Step 1.a+b - Write the address for read access into DBGDTR_EL0 */
/* Step 1.c - Copy value from DTR to R0 using instruction mrs DBGDTR_EL0, x0 */
retval = dpm->instr_write_data_dcc_64(dpm,
- ARMV8_MRS(SYSTEM_DBG_DBGDTR_EL0, 0), address & ~0x3ULL);
+ ARMV8_MRS(SYSTEM_DBG_DBGDTR_EL0, 0), address);
} else {
/* Write R0 with value 'address' using write procedure */
/* Step 1.a+b - Write the address for read access into DBGDTRRX */
/* Step 1.c - Copy value from DTR to R0 using instruction mrc DBGDTRTXint, r0 */
dpm->instr_write_data_dcc(dpm,
- ARMV4_5_MRC(14, 0, 0, 0, 5, 0), address & ~0x3ULL);
-
+ ARMV4_5_MRC(14, 0, 0, 0, 5, 0), address);
}
- /* Step 1.d - Change DCC to memory mode */
- dscr = dscr | DSCR_MA;
- retval += mem_ap_write_atomic_u32(armv8->debug_ap,
- armv8->debug_base + CPUV8_DBG_DSCR, dscr);
- if (retval != ERROR_OK)
- goto error_unset_dtr_w;
+ if (size == 4 && (address % 4) == 0)
+ retval = aarch64_write_cpu_memory_fast(target, count, buffer, &dscr);
+ else
+ retval = aarch64_write_cpu_memory_slow(target, size, count, buffer, &dscr);
- /* Step 2.a - Do the write */
- retval = mem_ap_write_buf_noincr(armv8->debug_ap,
- tmp_buff, 4, total_u32, armv8->debug_base + CPUV8_DBG_DTRRX);
- if (retval != ERROR_OK)
- goto error_unset_dtr_w;
-
- /* Step 3.a - Switch DTR mode back to Normal mode */
- dscr = (dscr & ~DSCR_MA);
- retval = mem_ap_write_atomic_u32(armv8->debug_ap,
- armv8->debug_base + CPUV8_DBG_DSCR, dscr);
- if (retval != ERROR_OK)
- goto error_unset_dtr_w;
+ if (retval != ERROR_OK) {
+ /* Unset DTR mode */
+ mem_ap_read_atomic_u32(armv8->debug_ap,
+ armv8->debug_base + CPUV8_DBG_DSCR, &dscr);
+ dscr &= ~DSCR_MA;
+ mem_ap_write_atomic_u32(armv8->debug_ap,
+ armv8->debug_base + CPUV8_DBG_DSCR, dscr);
+ }
/* Check for sticky abort flags in the DSCR */
retval = mem_ap_read_atomic_u32(armv8->debug_ap,
armv8->debug_base + CPUV8_DBG_DSCR, &dscr);
if (retval != ERROR_OK)
- goto error_free_buff_w;
+ return retval;
dpm->dscr = dscr;
if (dscr & (DSCR_ERR | DSCR_SYS_ERROR_PEND)) {
/* Abort occurred - clear it and exit */
LOG_ERROR("abort occurred - dscr = 0x%08" PRIx32, dscr);
armv8_dpm_handle_exception(dpm);
- goto error_free_buff_w;
+ return ERROR_FAIL;
}
/* Done */
- free(tmp_buff);
return ERROR_OK;
+}
-error_unset_dtr_w:
- /* Unset DTR mode */
- mem_ap_read_atomic_u32(armv8->debug_ap,
- armv8->debug_base + CPUV8_DBG_DSCR, &dscr);
- dscr = (dscr & ~DSCR_MA);
- mem_ap_write_atomic_u32(armv8->debug_ap,
- armv8->debug_base + CPUV8_DBG_DSCR, dscr);
-error_free_buff_w:
- LOG_ERROR("error");
- free(tmp_buff);
- return ERROR_FAIL;
+static int aarch64_read_cpu_memory_slow(struct target *target,
+ uint32_t size, uint32_t count, uint8_t *buffer, uint32_t *dscr)
+{
+ struct armv8_common *armv8 = target_to_armv8(target);
+ struct arm_dpm *dpm = &armv8->dpm;
+ struct arm *arm = &armv8->arm;
+ int retval;
+
+ armv8_reg_current(arm, 1)->dirty = true;
+
+ /* change DCC to normal mode (if necessary) */
+ if (*dscr & DSCR_MA) {
+ *dscr &= DSCR_MA;
+ retval = mem_ap_write_atomic_u32(armv8->debug_ap,
+ armv8->debug_base + CPUV8_DBG_DSCR, *dscr);
+ if (retval != ERROR_OK)
+ return retval;
+ }
+
+ while (count) {
+ uint32_t opcode, data;
+
+ if (size == 1)
+ opcode = armv8_opcode(armv8, ARMV8_OPC_LDRB_IP);
+ else if (size == 2)
+ opcode = armv8_opcode(armv8, ARMV8_OPC_LDRH_IP);
+ else
+ opcode = armv8_opcode(armv8, ARMV8_OPC_LDRW_IP);
+ retval = dpm->instr_execute(dpm, opcode);
+ if (retval != ERROR_OK)
+ return retval;
+
+ if (arm->core_state == ARM_STATE_AARCH64)
+ retval = dpm->instr_execute(dpm, ARMV8_MSR_GP(SYSTEM_DBG_DTRTX_EL0, 1));
+ else
+ retval = dpm->instr_execute(dpm, ARMV4_5_MCR(14, 0, 1, 0, 5, 0));
+ if (retval != ERROR_OK)
+ return retval;
+
+ retval = mem_ap_read_atomic_u32(armv8->debug_ap,
+ armv8->debug_base + CPUV8_DBG_DTRTX, &data);
+ if (retval != ERROR_OK)
+ return retval;
+
+ if (size == 1)
+ *buffer = (uint8_t)data;
+ else if (size == 2)
+ target_buffer_set_u16(target, buffer, (uint16_t)data);
+ else
+ target_buffer_set_u32(target, buffer, data);
+
+ /* Advance */
+ buffer += size;
+ --count;
+ }
+
+ return ERROR_OK;
}
-static int aarch64_read_apb_ap_memory(struct target *target,
+static int aarch64_read_cpu_memory_fast(struct target *target,
+ uint32_t count, uint8_t *buffer, uint32_t *dscr)
+{
+ struct armv8_common *armv8 = target_to_armv8(target);
+ struct arm_dpm *dpm = &armv8->dpm;
+ struct arm *arm = &armv8->arm;
+ int retval;
+ uint32_t value;
+
+ /* Mark X1 as dirty */
+ armv8_reg_current(arm, 1)->dirty = true;
+
+ if (arm->core_state == ARM_STATE_AARCH64) {
+ /* Step 1.d - Dummy operation to ensure EDSCR.Txfull == 1 */
+ retval = dpm->instr_execute(dpm, ARMV8_MSR_GP(SYSTEM_DBG_DBGDTR_EL0, 0));
+ } else {
+ /* Step 1.d - Dummy operation to ensure EDSCR.Txfull == 1 */
+ retval = dpm->instr_execute(dpm, ARMV4_5_MCR(14, 0, 0, 0, 5, 0));
+ }
+
+ /* Step 1.e - Change DCC to memory mode */
+ *dscr |= DSCR_MA;
+ retval = mem_ap_write_atomic_u32(armv8->debug_ap,
+ armv8->debug_base + CPUV8_DBG_DSCR, *dscr);
+ /* Step 1.f - read DBGDTRTX and discard the value */
+ retval = mem_ap_read_atomic_u32(armv8->debug_ap,
+ armv8->debug_base + CPUV8_DBG_DTRTX, &value);
+
+ count--;
+ /* Read the data - Each read of the DTRTX register causes the instruction to be reissued
+ * Abort flags are sticky, so can be read at end of transactions
+ *
+ * This data is read in aligned to 32 bit boundary.
+ */
+
+ if (count) {
+ /* Step 2.a - Loop n-1 times, each read of DBGDTRTX reads the data from [X0] and
+ * increments X0 by 4. */
+ retval = mem_ap_read_buf_noincr(armv8->debug_ap, buffer, 4, count,
+ armv8->debug_base + CPUV8_DBG_DTRTX);
+ if (retval != ERROR_OK)
+ return retval;
+ }
+
+ /* Step 3.a - set DTR access mode back to Normal mode */
+ *dscr &= ~DSCR_MA;
+ retval = mem_ap_write_atomic_u32(armv8->debug_ap,
+ armv8->debug_base + CPUV8_DBG_DSCR, *dscr);
+ if (retval != ERROR_OK)
+ return retval;
+
+ /* Step 3.b - read DBGDTRTX for the final value */
+ retval = mem_ap_read_atomic_u32(armv8->debug_ap,
+ armv8->debug_base + CPUV8_DBG_DTRTX, &value);
+ if (retval != ERROR_OK)
+ return retval;
+
+ target_buffer_set_u32(target, buffer + count * 4, value);
+ return retval;
+}
+
+static int aarch64_read_cpu_memory(struct target *target,
target_addr_t address, uint32_t size,
uint32_t count, uint8_t *buffer)
{
struct armv8_common *armv8 = target_to_armv8(target);
struct arm_dpm *dpm = &armv8->dpm;
struct arm *arm = &armv8->arm;
- int total_bytes = count * size;
- int total_u32;
- int start_byte = address & 0x3;
- int end_byte = (address + total_bytes) & 0x3;
- struct reg *reg;
uint32_t dscr;
- uint8_t *tmp_buff = NULL;
- uint8_t *u8buf_ptr;
- uint32_t value;
+
+ LOG_DEBUG("Reading CPU memory address 0x%016" PRIx64 " size %" PRIu32 " count %" PRIu32,
+ address, size, count);
if (target->state != TARGET_HALTED) {
LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
- total_u32 = DIV_ROUND_UP((address & 3) + total_bytes, 4);
- /* Mark register X0, X1 as dirty, as it will be used
+ /* Mark register X0 as dirty, as it will be used
* for transferring the data.
* It will be restored automatically when exiting
* debug mode
*/
- reg = armv8_reg_current(arm, 1);
- reg->dirty = true;
-
- reg = armv8_reg_current(arm, 0);
- reg->dirty = true;
+ armv8_reg_current(arm, 0)->dirty = true;
/* Read DSCR */
retval = mem_ap_read_atomic_u32(armv8->debug_ap,
/* This algorithm comes from DDI0487A.g, chapter J9.1 */
/* Set Normal access mode */
- dscr = (dscr & ~DSCR_MA);
+ dscr &= ~DSCR_MA;
retval += mem_ap_write_atomic_u32(armv8->debug_ap,
armv8->debug_base + CPUV8_DBG_DSCR, dscr);
/* Step 1.a+b - Write the address for read access into DBGDTR_EL0 */
/* Step 1.c - Copy value from DTR to R0 using instruction mrs DBGDTR_EL0, x0 */
retval += dpm->instr_write_data_dcc_64(dpm,
- ARMV8_MRS(SYSTEM_DBG_DBGDTR_EL0, 0), address & ~0x3ULL);
- /* Step 1.d - Dummy operation to ensure EDSCR.Txfull == 1 */
- retval += dpm->instr_execute(dpm, ARMV8_MSR_GP(SYSTEM_DBG_DBGDTR_EL0, 0));
- /* Step 1.e - Change DCC to memory mode */
- dscr = dscr | DSCR_MA;
- retval += mem_ap_write_atomic_u32(armv8->debug_ap,
- armv8->debug_base + CPUV8_DBG_DSCR, dscr);
- /* Step 1.f - read DBGDTRTX and discard the value */
- retval += mem_ap_read_atomic_u32(armv8->debug_ap,
- armv8->debug_base + CPUV8_DBG_DTRTX, &value);
+ ARMV8_MRS(SYSTEM_DBG_DBGDTR_EL0, 0), address);
} else {
/* Write R0 with value 'address' using write procedure */
/* Step 1.a+b - Write the address for read access into DBGDTRRXint */
/* Step 1.c - Copy value from DTR to R0 using instruction mrc DBGDTRTXint, r0 */
retval += dpm->instr_write_data_dcc(dpm,
- ARMV4_5_MRC(14, 0, 0, 0, 5, 0), address & ~0x3ULL);
- /* Step 1.d - Dummy operation to ensure EDSCR.Txfull == 1 */
- retval += dpm->instr_execute(dpm, ARMV4_5_MCR(14, 0, 0, 0, 5, 0));
- /* Step 1.e - Change DCC to memory mode */
- dscr = dscr | DSCR_MA;
- retval += mem_ap_write_atomic_u32(armv8->debug_ap,
- armv8->debug_base + CPUV8_DBG_DSCR, dscr);
- /* Step 1.f - read DBGDTRTX and discard the value */
- retval += mem_ap_read_atomic_u32(armv8->debug_ap,
- armv8->debug_base + CPUV8_DBG_DTRTX, &value);
-
+ ARMV4_5_MRC(14, 0, 0, 0, 5, 0), address);
}
- if (retval != ERROR_OK)
- goto error_unset_dtr_r;
-
- /* Optimize the read as much as we can, either way we read in a single pass */
- if ((start_byte) || (end_byte)) {
- /* The algorithm only copies 32 bit words, so the buffer
- * should be expanded to include the words at either end.
- * The first and last words will be read into a temp buffer
- * to avoid corruption
- */
- tmp_buff = malloc(total_u32 * 4);
- if (!tmp_buff)
- goto error_unset_dtr_r;
-
- /* use the tmp buffer to read the entire data */
- u8buf_ptr = tmp_buff;
- } else
- /* address and read length are aligned so read directly into the passed buffer */
- u8buf_ptr = buffer;
- /* Read the data - Each read of the DTRTX register causes the instruction to be reissued
- * Abort flags are sticky, so can be read at end of transactions
- *
- * This data is read in aligned to 32 bit boundary.
- */
-
- /* Step 2.a - Loop n-1 times, each read of DBGDTRTX reads the data from [X0] and
- * increments X0 by 4. */
- retval = mem_ap_read_buf_noincr(armv8->debug_ap, u8buf_ptr, 4, total_u32-1,
- armv8->debug_base + CPUV8_DBG_DTRTX);
- if (retval != ERROR_OK)
- goto error_unset_dtr_r;
+ if (size == 4 && (address % 4) == 0)
+ retval = aarch64_read_cpu_memory_fast(target, count, buffer, &dscr);
+ else
+ retval = aarch64_read_cpu_memory_slow(target, size, count, buffer, &dscr);
- /* Step 3.a - set DTR access mode back to Normal mode */
- dscr = (dscr & ~DSCR_MA);
- retval = mem_ap_write_atomic_u32(armv8->debug_ap,
+ if (dscr & DSCR_MA) {
+ dscr &= ~DSCR_MA;
+ mem_ap_write_atomic_u32(armv8->debug_ap,
armv8->debug_base + CPUV8_DBG_DSCR, dscr);
- if (retval != ERROR_OK)
- goto error_free_buff_r;
+ }
- /* Step 3.b - read DBGDTRTX for the final value */
- retval = mem_ap_read_atomic_u32(armv8->debug_ap,
- armv8->debug_base + CPUV8_DBG_DTRTX, &value);
- memcpy(u8buf_ptr + (total_u32-1) * 4, &value, 4);
+ if (retval != ERROR_OK)
+ return retval;
/* Check for sticky abort flags in the DSCR */
retval = mem_ap_read_atomic_u32(armv8->debug_ap,
armv8->debug_base + CPUV8_DBG_DSCR, &dscr);
if (retval != ERROR_OK)
- goto error_free_buff_r;
+ return retval;
dpm->dscr = dscr;
/* Abort occurred - clear it and exit */
LOG_ERROR("abort occurred - dscr = 0x%08" PRIx32, dscr);
armv8_dpm_handle_exception(dpm);
- goto error_free_buff_r;
- }
-
- /* check if we need to copy aligned data by applying any shift necessary */
- if (tmp_buff) {
- memcpy(buffer, tmp_buff + start_byte, total_bytes);
- free(tmp_buff);
+ return ERROR_FAIL;
}
/* Done */
return ERROR_OK;
-
-error_unset_dtr_r:
- /* Unset DTR mode */
- mem_ap_read_atomic_u32(armv8->debug_ap,
- armv8->debug_base + CPUV8_DBG_DSCR, &dscr);
- dscr = (dscr & ~DSCR_MA);
- mem_ap_write_atomic_u32(armv8->debug_ap,
- armv8->debug_base + CPUV8_DBG_DSCR, dscr);
-error_free_buff_r:
- LOG_ERROR("error");
- free(tmp_buff);
- return ERROR_FAIL;
}
static int aarch64_read_phys_memory(struct target *target,
retval = aarch64_mmu_modify(target, 0);
if (retval != ERROR_OK)
return retval;
- retval = aarch64_read_apb_ap_memory(target, address, size, count, buffer);
+ retval = aarch64_read_cpu_memory(target, address, size, count, buffer);
}
return retval;
}
if (retval != ERROR_OK)
return retval;
}
- return aarch64_read_apb_ap_memory(target, address, size, count, buffer);
+ return aarch64_read_cpu_memory(target, address, size, count, buffer);
}
static int aarch64_write_phys_memory(struct target *target,
retval = aarch64_mmu_modify(target, 0);
if (retval != ERROR_OK)
return retval;
- return aarch64_write_apb_ap_memory(target, address, size, count, buffer);
+ return aarch64_write_cpu_memory(target, address, size, count, buffer);
}
return retval;
if (retval != ERROR_OK)
return retval;
}
- return aarch64_write_apb_ap_memory(target, address, size, count, buffer);
+ return aarch64_write_cpu_memory(target, address, size, count, buffer);
}
static int aarch64_handle_target_request(void *priv)
Code Review / openocd.git / commitdiff