flash Kinetis: new KVx family added 35/3235/2
authorTomas Vanek <vanekt@fbl.cz>
Sat, 19 Dec 2015 11:34:31 +0000 (12:34 +0100)
committerFreddie Chopin <freddie.chopin@gmail.com>
Thu, 5 May 2016 06:35:31 +0000 (07:35 +0100)
Cortex-M0+ and M4 motor control MCUs KV10, KV11, KV30, KV31,
KV42, KV44 and KV46 added to SDID identification.
Watchdog disable code changed to work on Cortex-M0+ (KV1x)
Protection size set to 1K for 16K flash devices (KV10Z16)
- cherry picked from Andrey Smirnov's change #2051

Change-Id: Ia6f4868eaf7e2cb6ad6a736210c703a67e0027be
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/3235
Tested-by: jenkins
Reviewed-by: Kyle Manna <kyle.manna@fuel7.com>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
contrib/loaders/watchdog/Makefile [new file with mode: 0644]
contrib/loaders/watchdog/armv7m_kinetis_wdog.inc [new file with mode: 0644]
contrib/loaders/watchdog/armv7m_kinetis_wdog.s [new file with mode: 0644]
src/flash/nor/kinetis.c

diff --git a/contrib/loaders/watchdog/Makefile b/contrib/loaders/watchdog/Makefile
new file mode 100644 (file)
index 0000000..d9ef1d2
--- /dev/null
@@ -0,0 +1,19 @@
+BIN2C = ../../../src/helper/bin2char.sh
+
+ARM_CROSS_COMPILE ?= arm-none-eabi-
+ARM_AS      ?= $(ARM_CROSS_COMPILE)as
+ARM_OBJCOPY ?= $(ARM_CROSS_COMPILE)objcopy
+
+arm: armv7m_kinetis_wdog.inc
+
+armv7m_%.elf: armv7m_%.s
+       $(ARM_AS) -mthumb $< -o $@
+
+armv7m_%.bin: armv7m_%.elf
+       $(ARM_OBJCOPY) -Obinary $< $@
+
+armv7m_%.inc: armv7m_%.bin
+       $(BIN2C) < $< > $@
+
+clean:
+       -rm -f *.elf *.bin *.inc
diff --git a/contrib/loaders/watchdog/armv7m_kinetis_wdog.inc b/contrib/loaders/watchdog/armv7m_kinetis_wdog.inc
new file mode 100644 (file)
index 0000000..4b6579e
--- /dev/null
@@ -0,0 +1,4 @@
+/* Autogenerated with ../../../src/helper/bin2char.sh */
+0x04,0x4b,0x05,0x4a,0xda,0x81,0x05,0x4a,0xda,0x81,0x01,0x24,0x1a,0x88,0xa2,0x43,
+0x1a,0x80,0x06,0xe0,0x00,0x20,0x05,0x40,0x20,0xc5,0x00,0x00,0x28,0xd9,0x00,0x00,
+0x00,0x00,0x00,0xbe,
diff --git a/contrib/loaders/watchdog/armv7m_kinetis_wdog.s b/contrib/loaders/watchdog/armv7m_kinetis_wdog.s
new file mode 100644 (file)
index 0000000..bac924a
--- /dev/null
@@ -0,0 +1,64 @@
+/***************************************************************************
+ *   Copyright (C) 2015 Tomas Vanek                                        *
+ *   vanekt@fbl.cz                                                         *
+ *                                                                         *
+ *   This program is free software; you can redistribute it and/or modify  *
+ *   it under the terms of the GNU General Public License as published by  *
+ *   the Free Software Foundation; either version 2 of the License, or     *
+ *   (at your option) any later version.                                   *
+ *                                                                         *
+ *   This program is distributed in the hope that it will be useful,       *
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
+ *   GNU General Public License for more details.                          *
+ *                                                                         *
+ *   You should have received a copy of the GNU General Public License     *
+ *   along with this program; if not, write to the                         *
+ *   Free Software Foundation, Inc.                                        *
+ ***************************************************************************/
+
+/*
+       Disable watchdog for Kinetis Kx and KVx
+       Parameters: none
+       Used instruction set should work on both Cortex-M4 and M0+
+*/
+
+       .text
+       .syntax unified
+        .cpu cortex-m0
+       .thumb
+
+WDOG_ADDR      = 0x40052000
+/* WDOG registers offsets */
+WDOG_STCTRLH   = 0
+WDOG_UNLOCK    = 0x0e
+
+WDOG_KEY1      = 0xc520
+WDOG_KEY2      = 0xd928
+
+       .thumb_func
+start:
+/* WDOG_UNLOCK = 0xC520 */
+       ldr     r3, =WDOG_ADDR
+       ldr     r2, =WDOG_KEY1
+       strh    r2, [r3, WDOG_UNLOCK]
+/* WDOG_UNLOCK = 0xD928 */
+       ldr     r2, =WDOG_KEY2
+       strh    r2, [r3, WDOG_UNLOCK]
+/* WDOG_STCTRLH clear bit 0 */
+       movs    r4, #1
+       ldrh    r2, [r3, WDOG_STCTRLH]
+       bics    r2, r4
+       strh    r2, [r3, WDOG_STCTRLH]
+/* OpenOCD checks exit point address. Jump to the very end. */
+       b       done
+
+       .pool
+
+/* Avoid padding at .text segment end. Otherwise exit point check fails. */
+       .skip   ( . - start + 2) & 2, 0
+done:
+       bkpt    #0
+
+       .end
+
index 3d2fa1c643292a4d5c1f45d5ab979fe8cbd29f4c..4749c7bbd6864616960c852c86b99e99217526e6 100644 (file)
@@ -555,30 +555,11 @@ int kinetis_disable_wdog(struct target *target, uint32_t sim_sdid)
        int retval;
 
        static const uint8_t kinetis_unlock_wdog_code[] = {
        int retval;
 
        static const uint8_t kinetis_unlock_wdog_code[] = {
-               /* WDOG_UNLOCK = 0xC520 */
-               0x4f, 0xf4, 0x00, 0x53,    /* mov.w   r3, #8192     ; 0x2000  */
-               0xc4, 0xf2, 0x05, 0x03,    /* movt    r3, #16389    ; 0x4005  */
-               0x4c, 0xf2, 0x20, 0x52,   /* movw    r2, #50464    ; 0xc520  */
-               0xda, 0x81,               /* strh    r2, [r3, #14]  */
-
-               /* WDOG_UNLOCK = 0xD928 */
-               0x4f, 0xf4, 0x00, 0x53,   /* mov.w   r3, #8192     ; 0x2000  */
-               0xc4, 0xf2, 0x05, 0x03,   /* movt    r3, #16389    ; 0x4005  */
-               0x4d, 0xf6, 0x28, 0x12,   /* movw    r2, #55592    ; 0xd928  */
-               0xda, 0x81,               /* strh    r2, [r3, #14]  */
-
-               /* WDOG_SCR = 0x1d2 */
-               0x4f, 0xf4, 0x00, 0x53,   /* mov.w   r3, #8192     ; 0x2000  */
-               0xc4, 0xf2, 0x05, 0x03,   /* movt    r3, #16389    ; 0x4005  */
-               0x4f, 0xf4, 0xe9, 0x72,   /* mov.w   r2, #466      ; 0x1d2  */
-               0x1a, 0x80,               /* strh    r2, [r3, #0]  */
-
-               /* END */
-               0x00, 0xBE,               /* bkpt #0 */
+#include "../../../contrib/loaders/watchdog/armv7m_kinetis_wdog.inc"
        };
 
        /* Decide whether the connected device needs watchdog disabling.
        };
 
        /* Decide whether the connected device needs watchdog disabling.
-        * Disable for all Kx devices, i.e., return if it is a KLx */
+        * Disable for all Kx and KVx devices, return if it is a KLx */
 
        if ((sim_sdid & KINETIS_SDID_SERIESID_MASK) == KINETIS_SDID_SERIESID_KL)
                return ERROR_OK;
 
        if ((sim_sdid & KINETIS_SDID_SERIESID_MASK) == KINETIS_SDID_SERIESID_KL)
                return ERROR_OK;
@@ -1410,6 +1391,7 @@ static int kinetis_probe(struct flash_bank *bank)
                                LOG_ERROR("Unsupported Kinetis FAMILYID SUBFAMID");
                        }
                        break;
                                LOG_ERROR("Unsupported Kinetis FAMILYID SUBFAMID");
                        }
                        break;
+
                case KINETIS_SDID_SERIESID_KL:
                        /* KL-series */
                        pflash_sector_size_bytes = 1<<10;
                case KINETIS_SDID_SERIESID_KL:
                        /* KL-series */
                        pflash_sector_size_bytes = 1<<10;
@@ -1417,6 +1399,47 @@ static int kinetis_probe(struct flash_bank *bank)
                        /* autodetect 1 or 2 blocks */
                        kinfo->flash_support = FS_PROGRAM_LONGWORD;
                        break;
                        /* autodetect 1 or 2 blocks */
                        kinfo->flash_support = FS_PROGRAM_LONGWORD;
                        break;
+
+               case KINETIS_SDID_SERIESID_KV:
+                       /* KV-series */
+                       switch (kinfo->sim_sdid & (KINETIS_SDID_FAMILYID_MASK | KINETIS_SDID_SUBFAMID_MASK)) {
+                       case KINETIS_SDID_FAMILYID_K1X | KINETIS_SDID_SUBFAMID_KX0:
+                               /* KV10: FTFA, 1kB sectors */
+                               pflash_sector_size_bytes = 1<<10;
+                               num_blocks = 1;
+                               kinfo->flash_support = FS_PROGRAM_LONGWORD;
+                               break;
+
+                       case KINETIS_SDID_FAMILYID_K1X | KINETIS_SDID_SUBFAMID_KX1:
+                               /* KV11: FTFA, 2kB sectors */
+                               pflash_sector_size_bytes = 2<<10;
+                               num_blocks = 1;
+                               kinfo->flash_support = FS_PROGRAM_LONGWORD;
+                               break;
+
+                       case KINETIS_SDID_FAMILYID_K3X | KINETIS_SDID_SUBFAMID_KX0:
+                               /* KV30: FTFA, 2kB sectors, 1 block */
+                       case KINETIS_SDID_FAMILYID_K3X | KINETIS_SDID_SUBFAMID_KX1:
+                               /* KV31: FTFA, 2kB sectors, 2 blocks */
+                               pflash_sector_size_bytes = 2<<10;
+                               /* autodetect 1 or 2 blocks */
+                               kinfo->flash_support = FS_PROGRAM_LONGWORD | FS_INVALIDATE_CACHE;
+                               break;
+
+                       case KINETIS_SDID_FAMILYID_K4X | KINETIS_SDID_SUBFAMID_KX2:
+                       case KINETIS_SDID_FAMILYID_K4X | KINETIS_SDID_SUBFAMID_KX4:
+                       case KINETIS_SDID_FAMILYID_K4X | KINETIS_SDID_SUBFAMID_KX6:
+                               /* KV4x: FTFA, 4kB sectors */
+                               pflash_sector_size_bytes = 4<<10;
+                               num_blocks = 1;
+                               kinfo->flash_support = FS_PROGRAM_LONGWORD | FS_INVALIDATE_CACHE;
+                               break;
+
+                       default:
+                               LOG_ERROR("Unsupported KV FAMILYID SUBFAMID");
+                       }
+                       break;
+
                default:
                        LOG_ERROR("Unsupported K-series");
                }
                default:
                        LOG_ERROR("Unsupported K-series");
                }
@@ -1573,7 +1596,10 @@ static int kinetis_probe(struct flash_bank *bank)
                bank->base = 0x00000000 + bank->size * bank->bank_number;
                kinfo->prog_base = bank->base;
                kinfo->sector_size = pflash_sector_size_bytes;
                bank->base = 0x00000000 + bank->size * bank->bank_number;
                kinfo->prog_base = bank->base;
                kinfo->sector_size = pflash_sector_size_bytes;
-               kinfo->protection_size = pf_size / 32;
+               /* pflash is divided into 32 protection areas for
+                * parts with more than 32K of PFlash. For parts with
+                * less the protection unit is set to 1024 bytes */
+               kinfo->protection_size = MAX(pf_size / 32, 1024);
                kinfo->protection_block = (32 / num_pflash_blocks) * bank->bank_number;
 
        } else if ((unsigned)bank->bank_number < num_blocks) {
                kinfo->protection_block = (32 / num_pflash_blocks) * bank->bank_number;
 
        } else if ((unsigned)bank->bank_number < num_blocks) {

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)