These events have been deprecated for a number of years, update any
remaining scripts to the new events.
Change-Id: Ic31ff388545ac8b3a500045699ca92c541b13f12
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/634
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Tested-by: jenkins
Reviewed-by: Bill Traynor <wmat@alphatroop.com>
@* Before the target steps, gdb is trying to start/resume the target
@item @b{halted}
@* The target has halted
@* Before the target steps, gdb is trying to start/resume the target
@item @b{halted}
@* The target has halted
-@ignore
-@item @b{old-gdb_program_config}
-@* DO NOT USE THIS: Used internally
-@item @b{old-pre_resume}
-@* DO NOT USE THIS: Used internally
-@end ignore
@item @b{reset-assert-pre}
@* Issued as part of @command{reset} processing
after @command{reset_init} was triggered
@item @b{reset-assert-pre}
@* Issued as part of @command{reset} processing
after @command{reset_init} was triggered
target_call_event_callbacks(target, TARGET_EVENT_GDB_END);
break;
case TARGET_EVENT_GDB_FLASH_ERASE_START:
target_call_event_callbacks(target, TARGET_EVENT_GDB_END);
break;
case TARGET_EVENT_GDB_FLASH_ERASE_START:
- target_handle_event(target, TARGET_EVENT_OLD_gdb_program_config);
retval = jtag_execute_queue();
if (retval != ERROR_OK)
return retval;
retval = jtag_execute_queue();
if (retval != ERROR_OK)
return retval;
if (packet[0] == 'c') {
LOG_DEBUG("continue");
if (packet[0] == 'c') {
LOG_DEBUG("continue");
- target_handle_event(target, TARGET_EVENT_OLD_pre_resume);
retval = target_resume(target, current, address, 0, 0); /* resume at current
*address, don't handle
*breakpoints, not debugging
retval = target_resume(target, current, address, 0, 0); /* resume at current
*address, don't handle
*breakpoints, not debugging
}
static const Jim_Nvp nvp_target_event[] = {
}
static const Jim_Nvp nvp_target_event[] = {
- { .value = TARGET_EVENT_OLD_gdb_program_config , .name = "old-gdb_program_config" },
- { .value = TARGET_EVENT_OLD_pre_resume , .name = "old-pre_resume" },
{ .value = TARGET_EVENT_GDB_HALT, .name = "gdb-halt" },
{ .value = TARGET_EVENT_HALTED, .name = "halted" },
{ .value = TARGET_EVENT_GDB_HALT, .name = "gdb-halt" },
{ .value = TARGET_EVENT_HALTED, .name = "halted" },
{ .name = "gdb-start", .value = TARGET_EVENT_GDB_START },
{ .name = "gdb-end", .value = TARGET_EVENT_GDB_END },
{ .name = "gdb-start", .value = TARGET_EVENT_GDB_START },
{ .name = "gdb-end", .value = TARGET_EVENT_GDB_END },
- /* historical name */
-
- { .value = TARGET_EVENT_RESET_START, .name = "reset-start" },
-
+ { .value = TARGET_EVENT_RESET_START, .name = "reset-start" },
{ .value = TARGET_EVENT_RESET_ASSERT_PRE, .name = "reset-assert-pre" },
{ .value = TARGET_EVENT_RESET_ASSERT, .name = "reset-assert" },
{ .value = TARGET_EVENT_RESET_ASSERT_POST, .name = "reset-assert-post" },
{ .value = TARGET_EVENT_RESET_ASSERT_PRE, .name = "reset-assert-pre" },
{ .value = TARGET_EVENT_RESET_ASSERT, .name = "reset-assert" },
{ .value = TARGET_EVENT_RESET_ASSERT_POST, .name = "reset-assert-post" },
return ERROR_COMMAND_SYNTAX_ERROR;
struct target *target = get_current_target(CMD_CTX);
return ERROR_COMMAND_SYNTAX_ERROR;
struct target *target = get_current_target(CMD_CTX);
- target_handle_event(target, TARGET_EVENT_OLD_pre_resume);
/* with no CMD_ARGV, resume from current pc, addr = 0,
* with one arguments, addr = CMD_ARGV[0],
/* with no CMD_ARGV, resume from current pc, addr = 0,
* with one arguments, addr = CMD_ARGV[0],
const char *debug_reason_name(struct target *t);
enum target_event {
const char *debug_reason_name(struct target *t);
enum target_event {
- /* LD historical names
- * - Prior to the great TCL change
- * - June/July/Aug 2008
- * - Duane Ellis */
- TARGET_EVENT_OLD_gdb_program_config,
- TARGET_EVENT_OLD_pre_resume,
/* allow GDB to do stuff before others handle the halted event,
* this is in lieu of defining ordering of invocation of events,
/* allow GDB to do stuff before others handle the halted event,
* this is in lieu of defining ordering of invocation of events,
}
$_TARGETNAME configure -event reset-halt-post { watchdog_service }
}
$_TARGETNAME configure -event reset-halt-post { watchdog_service }
-$_TARGETNAME configure -event old-pre_resume { global watchdog_hdl; after cancel $watchdog_hdl }
+$_TARGETNAME configure -event resume-start { global watchdog_hdl; after cancel $watchdog_hdl }
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)