Added asser_reset and deassert_reset for cortex_a8
authormlu <mlu@b42882b7-edfa-0310-969c-e2dbd0fdcd60>
Fri, 2 Oct 2009 16:36:03 +0000 (16:36 +0000)
committermlu <mlu@b42882b7-edfa-0310-969c-e2dbd0fdcd60>
Fri, 2 Oct 2009 16:36:03 +0000 (16:36 +0000)
git-svn-id: svn://svn.berlios.de/openocd/trunk@2791 b42882b7-edfa-0310-969c-e2dbd0fdcd60

src/target/cortex_a8.c

index f6f13cfc9b742ab84bd6c376631bfe7a8e7995f7..2486c94cb37b6c6f34a401209bdb7ebe2804dd7c 100644 (file)
@@ -67,6 +67,8 @@ int cortex_a8_dap_read_coreregister_u32(target_t *target,
                uint32_t *value, int regnum);
 int cortex_a8_dap_write_coreregister_u32(target_t *target,
                uint32_t value, int regnum);
+int cortex_a8_assert_reset(target_t *target);
+int cortex_a8_deassert_reset(target_t *target);
 
 target_type_t cortexa8_target =
 {
@@ -138,8 +140,13 @@ int cortex_a8_init_debug_access(target_t *target)
        /* Clear Sticky Power Down status Bit in PRSR to enable access to
           the registers in the Core Power Domain */
        retval = mem_ap_read_atomic_u32(swjdp, armv7a->debug_base + CPUDBG_PRSR, &dummy);
-       /* Enabling of instruction execution in debug mode is done in debug_entry code */
-
+       /* Enabling of instruction execution in debug mode is done in debug_entry code */ 
+       
+       /* Resync breakpoint registers */
+       
+       /* Since this is likley called from init or reset, update targtet state information*/
+       cortex_a8_poll(target);
+       
        return retval;
 }
 
@@ -303,7 +310,7 @@ int cortex_a8_dap_write_coreregister_u32(target_t *target, uint32_t value, int r
        armv4_5_common_t *armv4_5 = target->arch_info;
        armv7a_common_t *armv7a = armv4_5->arch_info;
        swjdp_common_t *swjdp = &armv7a->swjdp_info;
-
+       
        if (Rd > 16)
                return retval;
 
@@ -1188,6 +1195,33 @@ int cortex_a8_remove_breakpoint(struct target_s *target, breakpoint_t *breakpoin
  * Cortex-A8 Reset fuctions
  */
 
+int cortex_a8_assert_reset(target_t *target)
+{
+
+       LOG_DEBUG(" ");
+
+       /* registers are now invalid */
+       armv4_5_invalidate_core_regs(target);
+
+       target->state = TARGET_RESET;
+       
+       return ERROR_OK;
+}
+
+int cortex_a8_deassert_reset(target_t *target)
+{
+
+       LOG_DEBUG(" ");
+
+       if (target->reset_halt)
+       {
+               int retval;
+               if ((retval = target_halt(target)) != ERROR_OK)
+                       return retval;
+       }
+
+       return ERROR_OK;
+}
 
 /*
  * Cortex-A8 Memory access
@@ -1265,23 +1299,23 @@ int cortex_a8_write_memory(struct target_s *target, uint32_t address,
                        exit(-1);
        }
 
-       /* The Cache handling will NOT work with MMU active, the wrong addresses will be invalidated */
-       /* invalidate I-Cache */
-       if (armv7a->armv4_5_mmu.armv4_5_cache.i_cache_enabled)
-       {
-               /* Invalidate ICache single entry with MVA, repeat this for all cache
-                  lines in the address range, Cortex-A8 has fixed 64 byte line length */
-               /* Invalidate Cache single entry with MVA to PoU */
-               for (uint32_t cacheline=address; cacheline<address+size*count; cacheline+=64)
-                       armv7a->write_cp15(target, 0, 1, 7, 5, cacheline); /* I-Cache to PoU */
-       }
-       /* invalidate D-Cache */
-       if (armv7a->armv4_5_mmu.armv4_5_cache.d_u_cache_enabled)
-       {
-               /* Invalidate Cache single entry with MVA to PoC */
-               for (uint32_t cacheline=address; cacheline<address+size*count; cacheline+=64)
-                       armv7a->write_cp15(target, 0, 1, 7, 6, cacheline); /* U/D cache to PoC */
-       }
+               /* The Cache handling will NOT work with MMU active, the wrong addresses will be invalidated */
+               /* invalidate I-Cache */
+               if (armv7a->armv4_5_mmu.armv4_5_cache.i_cache_enabled)
+               {
+                       /* Invalidate ICache single entry with MVA, repeat this for all cache
+                          lines in the address range, Cortex-A8 has fixed 64 byte line length */
+                       /* Invalidate Cache single entry with MVA to PoU */
+                       for (uint32_t cacheline=address; cacheline<address+size*count; cacheline+=64)
+                               armv7a->write_cp15(target, 0, 1, 7, 5, cacheline); /* I-Cache to PoU */
+               }
+               /* invalidate D-Cache */
+               if (armv7a->armv4_5_mmu.armv4_5_cache.d_u_cache_enabled)
+               {
+                       /* Invalidate Cache single entry with MVA to PoC */
+                       for (uint32_t cacheline=address; cacheline<address+size*count; cacheline+=64)
+                               armv7a->write_cp15(target, 0, 1, 7, 6, cacheline); /* U/D cache to PoC */
+               }
 
        return retval;
 }
@@ -1374,7 +1408,7 @@ int cortex_a8_examine(struct target_s *target)
        uint32_t didr, ctypr, ttypr, cpuid;
 
        LOG_DEBUG("TODO");
-
+       
        /* Here we shall insert a proper ROM Table scan */
        armv7a->debug_base = OMAP3530_DEBUG_BASE;
 
@@ -1451,7 +1485,7 @@ int cortex_a8_examine(struct target_s *target)
 
        /* Configure core debug access */
        cortex_a8_init_debug_access(target);
-
+       
        target->type->examined = 1;
 
        return retval;

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)