optional crc for flash writing
authorRodrigo L. Rosa <rodrigorosa.LG@gmail.com>
Tue, 30 Aug 2011 21:19:09 +0000 (14:19 -0700)
committerRodrigo L. Rosa <rodrigorosa.LG@gmail.com>
Tue, 30 Aug 2011 22:09:34 +0000 (15:09 -0700)
crc check was always performed on newly flashed data, now it is optional
flash mem can be locked by writing a specific word to a specific address in flash.
to verify flash, target must be halted, and this will (when the new halt sequence is implemented) require reseting the chip. if the target is reset after writing the lock words, then it will lock, hence the CRC will fail because it is not possible to read stuff from the target.

also added a function that resets the jtag state machine.
this is not used yet, but will be soon.
it is implemented to allow strict control over JTAG state machine, necessary to implement to halt and unlocking sequences.

src/flash/nor/dsp5680xx_flash.c
src/target/dsp5680xx.c
src/target/dsp5680xx.h

index 4ed720665cc875f0f6e8e77a77fd5637cf669636..688493b3ec5acd716deb74fae618365ace3a64a5 100644 (file)
@@ -157,7 +157,7 @@ static int dsp5680xx_flash_write(struct flash_bank *bank, uint8_t *buffer, uint3
     LOG_ERROR("%s: Writing to odd addresses not supported. This chip uses word addressing, Openocd only supports byte addressing. The workaround results in disabling writing to odd byte addresses.",__FUNCTION__);
     return ERROR_FAIL;
   }
-  retval = dsp5680xx_f_wr(bank->target,  buffer, bank->base + offset/2,  count);
+  retval = dsp5680xx_f_wr(bank->target,  buffer, bank->base + offset/2,  count, 0);
   uint32_t addr_word;
   for(addr_word = bank->base + offset/2;addr_word<count/2;addr_word+=(HFM_SECTOR_SIZE/2)){
     if(retval == ERROR_OK)
index c25eabf6696a2f35f887178c7a2546846e3d7a70..4cd3ff5b08a18378c1cb7b2d7c37595580d5f5f2 100644 (file)
@@ -1341,7 +1341,7 @@ int dsp5680xx_f_erase(struct target * target, int first, int last){
 const uint16_t pgm_write_pflash[] = {0x8A46,0x0013,0x407D,0xE700,0xE700,0x8A44,0xFFFE,0x017B,0xE700,0xF514,0x8563,0x8646,0x0020,0x0014,0x8646,0x0080,0x0013,0x8A46,0x0013,0x2004,0x8246,0x0013,0x0020,0xA968,0x8A46,0x0013,0x1065,0x8246,0x0013,0x0010,0xA961};
 const uint32_t pgm_write_pflash_length = 31;
 
-int dsp5680xx_f_wr(struct target * target, uint8_t *buffer, uint32_t address, uint32_t count){
+int dsp5680xx_f_wr(struct target * target, uint8_t *buffer, uint32_t address, uint32_t count, int is_flash_lock){
   int retval = ERROR_OK;
   if (dsp5680xx_target_status(target,NULL,NULL) != TARGET_HALTED){
     retval = eonce_enter_debug_mode(target,NULL);
@@ -1351,10 +1351,12 @@ int dsp5680xx_f_wr(struct target * target, uint8_t *buffer, uint32_t address, ui
   // Download the pgm that flashes.
   // -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
   uint32_t my_favourite_ram_address = 0x8700; // This seems to be a safe address. This one is the one used by codewarrior in 56801x_flash.cfg
-  retval = dsp5680xx_write(target, my_favourite_ram_address, 1, pgm_write_pflash_length*2,(uint8_t *) pgm_write_pflash);
-  err_check_propagate(retval);
-  retval = dsp5680xx_execute_queue();
-  err_check_propagate(retval);
+  if(!is_flash_lock){
+    retval = dsp5680xx_write(target, my_favourite_ram_address, 1, pgm_write_pflash_length*2,(uint8_t *) pgm_write_pflash);
+    err_check_propagate(retval);
+    retval = dsp5680xx_execute_queue();
+    err_check_propagate(retval);
+  }
   // -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
   // Set hfmdiv
   // -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
@@ -1422,21 +1424,38 @@ int dsp5680xx_f_wr(struct target * target, uint8_t *buffer, uint32_t address, ui
        dsp5680xx_context.flush = 0;
   }
   dsp5680xx_context.flush = 1;
-  // -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
-  // Verify flash
-  // -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
-  uint16_t signature;
-  uint16_t pc_crc;
-  retval =  dsp5680xx_f_signature(target,address,i,&signature);
-  err_check_propagate(retval);
-  pc_crc = perl_crc(buffer,i);
-  if(pc_crc != signature){
-    retval = ERROR_FAIL;
-    err_check(retval,"Flashed data failed CRC check, flash again!");
+  if(!is_flash_lock){
+    // -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+    // Verify flash (skip when exec lock sequence)
+    // -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+    uint16_t signature;
+    uint16_t pc_crc;
+    retval =  dsp5680xx_f_signature(target,address,i,&signature);
+    err_check_propagate(retval);
+    pc_crc = perl_crc(buffer,i);
+    if(pc_crc != signature){
+      retval = ERROR_FAIL;
+      err_check(retval,"Flashed data failed CRC check, flash again!");
+    }
   }
   return retval;
 }
 
+// Reset state machine
+int reset_jtag(void){
+  int retval;
+  tap_state_t states[2];
+  const char *cp = "RESET";
+  states[0] = tap_state_by_name(cp);
+  retval = jtag_add_statemove(states[0]);
+  err_check_propagate(retval);
+  retval = jtag_execute_queue();
+  err_check_propagate(retval);
+  jtag_add_pathmove(0, states + 1);
+  retval = jtag_execute_queue();
+  return retval;
+}
+
 int dsp5680xx_f_unlock(struct target * target){
   int retval;
   if(target->tap->enabled){
@@ -1457,7 +1476,7 @@ int dsp5680xx_f_unlock(struct target * target){
 int dsp5680xx_f_lock(struct target * target){
   int retval;
   uint16_t lock_word[] = {HFM_LOCK_FLASH,HFM_LOCK_FLASH};
-  retval = dsp5680xx_f_wr(target,(uint8_t *)(lock_word),HFM_LOCK_ADDR_L,4);
+  retval = dsp5680xx_f_wr(target,(uint8_t *)(lock_word),HFM_LOCK_ADDR_L,4,1);
   err_check_propagate(retval);
   return retval;
 }
index 6c86ef8078fcbb1c8241b1309040138aa8966363..05b4a28ee196f652a715fbbb67e58a794cb25b0a 100644 (file)
@@ -234,10 +234,11 @@ static inline struct dsp5680xx_common *target_to_dsp5680xx(struct target *target
  * @param buffer 
  * @param address Word addressing.
  * @param count In bytes. 
+ * @param verify_flash Execute a CRC check after flashing. 
  * 
  * @return 
  */
-int dsp5680xx_f_wr(struct target * target, uint8_t *buffer, uint32_t address, uint32_t count);
+int dsp5680xx_f_wr(struct target * target, uint8_t *buffer, uint32_t address, uint32_t count, int is_flash_lock);
 
 /** 
  * The FM has the funcionality of checking if the flash array is erased. This function executes it. It does not support individual sector analysis.

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)