armv4_5_info.common_magic = ARMV4_5_COMMON_MAGIC;
armv4_5_info.core_mode = ARMV4_5_MODE_SVC;
armv4_5_info.common_magic = ARMV4_5_COMMON_MAGIC;
armv4_5_info.core_mode = ARMV4_5_MODE_SVC;
- armv4_5_info.core_state = ARMV4_5_STATE_ARM;\r
- \r
+ armv4_5_info.core_state = ARMV4_5_STATE_ARM;
+
/* If we are setting up the write_algorith, we need target_code_src */
/* if not we only need target_code_size. */
/* */
/* However, we don't want to create multiple code paths, so we */
/* do the unecessary evaluation of target_code_src, which the */
/* compiler will probably nicely optimize away if not needed */
/* If we are setting up the write_algorith, we need target_code_src */
/* if not we only need target_code_size. */
/* */
/* However, we don't want to create multiple code paths, so we */
/* do the unecessary evaluation of target_code_src, which the */
/* compiler will probably nicely optimize away if not needed */
/* prepare algorithm code for target endian */
switch (bank->bus_width)
{
/* prepare algorithm code for target endian */
switch (bank->bus_width)
{
c->base = strtoul(args[1], NULL, 0);
c->size = strtoul(args[2], NULL, 0);
c->chip_width = strtoul(args[3], NULL, 0);
c->base = strtoul(args[1], NULL, 0);
c->size = strtoul(args[2], NULL, 0);
c->chip_width = strtoul(args[3], NULL, 0);
- c->bus_width = strtoul(args[4], NULL, 0);\r
- c->num_sectors = 0;\r
+ c->bus_width = strtoul(args[4], NULL, 0);
+ c->num_sectors = 0;
c->sectors = NULL;
c->next = NULL;
c->sectors = NULL;
c->next = NULL;
}
image.start_address_set = 0;
}
image.start_address_set = 0;
retval = image_open(&image, args[0], (argc == 3) ? args[2] : NULL);
if (retval != ERROR_OK)
{
retval = image_open(&image, args[0], (argc == 3) ? args[2] : NULL);
if (retval != ERROR_OK)
{
***************************************************************************/
#ifdef HAVE_CONFIG_H
#include "config.h"
***************************************************************************/
#ifdef HAVE_CONFIG_H
#include "config.h"
/* DANGER!!!! These must be defined *BEFORE* replacements.h and the malloc() macro!!!! */
#include <stdlib.h>
#include <strings.h>
/* DANGER!!!! These must be defined *BEFORE* replacements.h and the malloc() macro!!!! */
#include <stdlib.h>
#include <strings.h>
-/* \r
- * clear_malloc\r
- *\r
- * will alloc memory and clear it\r
+/*
+ * clear_malloc
+ *
+ * will alloc memory and clear it
*/
void *clear_malloc(size_t size)
{
*/
void *clear_malloc(size_t size)
{
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)