if (control_tt != AP_AC_TT_DISABLE) {
if (arc->actionpoints_num_avail < 1) {
- LOG_ERROR("No free actionpoints, maximim amount is %u",
+ LOG_ERROR("No free actionpoints, maximum amount is %u",
arc->actionpoints_num);
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
bool dcache_invalidated;
bool l2cache_invalidated;
- /* Indicate if cach was built (for deinit function) */
+ /* Indicate if cache was built (for deinit function) */
bool core_aux_cache_built;
bool bcr_cache_built;
/* Closely Coupled memory(CCM) regions for performance-critical
* This file implements support for the ARM Debug Interface version 5 (ADIv5)
* debugging architecture. Compared with previous versions, this includes
* a low pin-count Serial Wire Debug (SWD) alternative to JTAG for message
- * transport, and focusses on memory mapped resources as defined by the
+ * transport, and focuses on memory mapped resources as defined by the
* CoreSight architecture.
*
* A key concept in ADIv5 is the Debug Access Port, or DAP. A DAP has two
*/
if (addr & 3) {
/*
- * mwa_read will read whole world, no nead to fiddle
+ * mwa_read will read whole world, no need to fiddle
* with address. It will be truncated in set_addr
*/
retval = avr32_jtag_mwa_read(jtag_info, SLAVE_HSB_UNCACHED,
*/
if (addr & 3) {
/*
- * mwa_read will read whole world, no nead to fiddle
+ * mwa_read will read whole world, no need to fiddle
* with address. It will be truncated in set_addr
*/
retval = avr32_jtag_mwa_read(jtag_info, SLAVE_HSB_UNCACHED,
int embeddedice_handshake(struct arm_jtag *jtag_info, int hsbit, uint32_t timeout);
-/* If many embeddedice_write_reg() follow eachother, then the >1 invocations can be
+/* If many embeddedice_write_reg() follow each other, then the >1 invocations can be
* this faster version of embeddedice_write_reg
*/
static inline void embeddedice_write_reg_inner(struct jtag_tap *tap, int reg_addr, uint32_t value)
if (goi->isconfigure) {
struct command_context *cmd_ctx = current_command_context(goi->interp);
if (cmd_ctx->mode != COMMAND_CONFIG) {
- Jim_SetResultString(goi->interp, "-gdb-max-conenctions must be configured before 'init'", -1);
+ Jim_SetResultString(goi->interp, "-gdb-max-connections must be configured before 'init'", -1);
return JIM_ERR;
}
* state correctly.
*
* Otherwise the following would fail, as there will not
- * be any "poll" invoked inbetween the "reset run" and
+ * be any "poll" invoked between the "reset run" and
* "halt".
*
* reset run; halt