Remove vim editor commands from TCL files.

git-svn-id: svn://svn.berlios.de/openocd/trunk@2455 b42882b7-edfa-0310-969c-e2dbd0fdcd60

diff --git a/tcl/board/csb337.cfg b/tcl/board/csb337.cfg
index dd8bfa2de970ed8da7899bdf049ccbeaa65fd03b..c2c47898be642d01be912f81544c0261b9034d2c 100644 (file)
--- a/tcl/board/csb337.cfg
+++ b/tcl/board/csb337.cfg
@@ -112,5 +112,3 @@ proc csb337_reset_init { } {
 }
 
 $_TARGETNAME configure -event reset-init {csb337_reset_init}
 }
 
 $_TARGETNAME configure -event reset-init {csb337_reset_init}

-
-# vim:syntax tcl

diff --git a/tcl/board/omap2420_h4.cfg b/tcl/board/omap2420_h4.cfg
index 4a5daaf69367be6e2936f16ac414b7e166be03f7..c2190b5c18d9ed480cf020934c2b065217904b51 100644 (file)
--- a/tcl/board/omap2420_h4.cfg
+++ b/tcl/board/omap2420_h4.cfg
@@ -10,5 +10,3 @@ reset_config trst_and_srst separate
 # has 64M NAND on cs6.
 flash bank cfi 0x04000000 0x02000000 2 2 $_TARGETNAME
 flash bank cfi 0x06000000 0x02000000 2 2 $_TARGETNAME
 # has 64M NAND on cs6.
 flash bank cfi 0x04000000 0x02000000 2 2 $_TARGETNAME
 flash bank cfi 0x06000000 0x02000000 2 2 $_TARGETNAME

-
-# vim:syntax tcl

diff --git a/tcl/target/icepick.cfg b/tcl/target/icepick.cfg
index 0597a9a53a3628b8da04fed4a192b5a1ca395277..da92c9ee3233810b97d38b113ed25932fcb9203b 100644 (file)
--- a/tcl/target/icepick.cfg
+++ b/tcl/target/icepick.cfg
@@ -19,5 +19,3 @@ proc icepick_c_tapenable {jrc port} {
        irscan $jrc 0x3F -endstate RUN/IDLE
        runtest 10
 }
        irscan $jrc 0x3F -endstate RUN/IDLE
        runtest 10
 }

-
-# vim:syntax tcl

diff --git a/tcl/target/omap2420.cfg b/tcl/target/omap2420.cfg
index 9cce2e78974902e6a81a3a08175544fbd9df7f64..01557491f9f934f7a96f43a3eda0c75c6ecd6a0a 100644 (file)
--- a/tcl/target/omap2420.cfg
+++ b/tcl/target/omap2420.cfg
@@ -57,5 +57,3 @@ $_TARGETNAME configure -work-area-backup 0
 # REVISIT ... as of 12-June-2009, OpenOCD's ETM code can't talk to ARM11 cores.
 #etm config $_TARGETNAME 16 normal full etb
 #etb config $_TARGETNAME $_CHIPNAME.etb
 # REVISIT ... as of 12-June-2009, OpenOCD's ETM code can't talk to ARM11 cores.
 #etm config $_TARGETNAME 16 normal full etb
 #etb config $_TARGETNAME $_CHIPNAME.etb

-
-# vim:syntax tcl

diff --git a/tcl/target/ti_dm6446.cfg b/tcl/target/ti_dm6446.cfg
index 3905b3d65a0b7960d43445feba9f00f1c77250eb..f951a090f654a05f4d5e3aaf86c6ccdd5323c6ee 100644 (file)
--- a/tcl/target/ti_dm6446.cfg
+++ b/tcl/target/ti_dm6446.cfg
@@ -75,5 +75,3 @@ arm7_9 dcc_downloads enable
 # trace setup
 etm config $_TARGETNAME 16 normal full etb
 etb config $_TARGETNAME $_CHIPNAME.etb
 # trace setup
 etm config $_TARGETNAME 16 normal full etb
 etb config $_TARGETNAME $_CHIPNAME.etb

-
-# vim:syntax tcl