- added new device to luminary flash driver
authorntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>
Wed, 30 Apr 2008 18:33:21 +0000 (18:33 +0000)
committerntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>
Wed, 30 Apr 2008 18:33:21 +0000 (18:33 +0000)
- only use SYSRESETREQ on affected luminary parts

git-svn-id: svn://svn.berlios.de/openocd/trunk@630 b42882b7-edfa-0310-969c-e2dbd0fdcd60

src/flash/stellaris.c
src/target/cortex_m3.c

index efcd7818c9b488b0cb55634aa1641ec14402525e..ecdf686d558efd5ef471cd0374a9bcb73dbb0377 100644 (file)
@@ -81,6 +81,11 @@ struct {
 {
        {0x01,"LM3S101"},
        {0x02,"LM3S102"},
+       {0x03,"LM3S1625"},
+       {0x04,"LM3S1626"},
+       {0x05,"LM3S1627"},
+       {0x06,"LM3S1607"},
+       {0x10,"LM3S1776"},
        {0x19,"LM3S300"},
        {0x11,"LM3S301"},
        {0x12,"LM3S310"},
@@ -106,10 +111,20 @@ struct {
        {0x39,"LM3S808"},
        {0x32,"LM3S811"},
        {0x33,"LM3S812"},
+       /*{0x33,"LM3S2616"},*/
        {0x34,"LM3S815"},
        {0x36,"LM3S817"},
        {0x37,"LM3S818"},
        {0x35,"LM3S828"},
+       {0x39,"LM3S2276"},
+       {0x3A,"LM3S2776"},
+       {0x43,"LM3S3651"},
+       {0x44,"LM3S3739"},
+       {0x45,"LM3S3749"},
+       {0x46,"LM3S3759"},
+       {0x48,"LM3S3768"},
+       {0x49,"LM3S3748"},
+       {0x50,"LM3S2678"},
        {0x51,"LM3S2110"},
        {0x52,"LM3S2739"},
        {0x53,"LM3S2651"},
@@ -133,6 +148,8 @@ struct {
        {0x76,"LM3S6537"},
        {0x77,"LM3S6753"},
        {0x78,"LM3S6952"},
+       {0x80,"LM3S2671"},
+       {0x81,"LM3S5632"},
        {0x82,"LM3S6422"},
        {0x83,"LM3S6633"},
        {0x84,"LM3S2139"},
@@ -140,17 +157,30 @@ struct {
        {0x86,"LM3S8738"},
        {0x88,"LM3S8938"},
        {0x89,"LM3S6938"},
+       {0x8A,"LM3S5652"},
        {0x8B,"LM3S6637"},
        {0x8C,"LM3S8933"},
        {0x8D,"LM3S8733"},
        {0x8E,"LM3S8538"},
        {0x8F,"LM3S2948"},
+       {0x91,"LM3S5662"},
+       {0x96,"LM3S5732"},
+       {0x97,"LM3S5737"},
+       {0x99,"LM3S5747"},
+       {0x9A,"LM3S5752"},
+       {0x9B,"LM3S5757"},
+       {0x9C,"LM3S5762"},
+       {0x9D,"LM3S5767"},
+       {0xA0,"LM3S5739"},
        {0xA1,"LM3S6100"},
        {0xA2,"LM3S2410"},
        {0xA3,"LM3S6730"},
        {0xA4,"LM3S2730"},
        {0xA5,"LM3S6420"},
        {0xA6,"LM3S8962"},
+       {0xA7,"LM3S5749"},
+       {0xA8,"LM3S5769"},
+       {0xA9,"LM3S5768"},
        {0xB3,"LM3S1635"},
        {0xB4,"LM3S1850"},
        {0xB5,"LM3S1960"},
@@ -200,10 +230,13 @@ struct {
        {0,"Unknown part"}
 };
 
-char * StellarisClassname[2] =
+char * StellarisClassname[5] =
 {
        "Sandstorm",
-       "Fury"
+       "Fury",
+       "Unknown",
+       "DustDevil",
+       "Tempest"
 };
 
 /***************************************************************************
index ec3851667d386a380766b89af9e11397c21e34ff..fb3b36b46a55be674f520f4571d8ab6369b0a5c6 100644 (file)
@@ -673,6 +673,7 @@ int cortex_m3_assert_reset(target_t *target)
        armv7m_common_t *armv7m = target->arch_info;
        cortex_m3_common_t *cortex_m3 = armv7m->arch_info;
        swjdp_common_t *swjdp = &cortex_m3->swjdp_info;
+       int assert_srst = TRUE;
        
        LOG_DEBUG("target->state: %s", target_state_strings[target->state]);
        
@@ -712,12 +713,33 @@ int cortex_m3_assert_reset(target_t *target)
                
        if (strcmp(cortex_m3->variant, "lm3s") == 0)
        {
-               /* this causes the luminary device to reset using the watchdog */
-               ahbap_write_system_atomic_u32(swjdp, NVIC_AIRCR, AIRCR_VECTKEY | AIRCR_SYSRESETREQ );
-               LOG_DEBUG("Using Luminary Reset: SYSRESETREQ");
+               /* get revision of lm3s target, only early silicon has this issue
+                * Fury Rev B, DustDevil Rev B, Tempest all ok */
+               
+               u32 did0;
+               
+               if (target_read_u32(target, 0x400fe000, &did0) == ERROR_OK)
+               {
+                       switch ((did0 >> 16) & 0xff)
+                       {
+                               case 0:
+                                       /* all Sandstorm suffer issue */
+                                       assert_srst = FALSE;
+                                       break;
+                               
+                               case 1:
+                               case 3:
+                                       /* only Fury/DustDevil rev A suffer reset problems */
+                                       if (((did0 >> 8) & 0xff) == 0)
+                                               assert_srst = FALSE;
+                                       break;
+                       }
+               }
        }
-       else
+       
+       if (assert_srst == TRUE)
        {
+               /* default to asserting srst */
                if (jtag_reset_config & RESET_SRST_PULLS_TRST)
                {
                        jtag_add_reset(1, 1);
@@ -727,6 +749,12 @@ int cortex_m3_assert_reset(target_t *target)
                        jtag_add_reset(0, 1);
                }
        }
+       else
+       {
+               /* this causes the luminary device to reset using the watchdog */
+               ahbap_write_system_atomic_u32(swjdp, NVIC_AIRCR, AIRCR_VECTKEY | AIRCR_SYSRESETREQ );
+               LOG_DEBUG("Using Luminary Reset: SYSRESETREQ");
+       }
        
        target->state = TARGET_RESET;
        jtag_add_sleep(50000);

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)