From: Felipe Balbi <balbi@ti.com>
Date: Sat, 14 Mar 2015 00:55:36 +0000 (-0500)
Subject: tcl: board: ti_am437x_evm: select jtag transport
X-Git-Tag: v0.9.0-rc1~64
X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=commitdiff_plain;h=03a661a52d3a48568587bcd7cb443e8f76b9c67f;hp=0baecf99437110356917430af396692fbc53a895

tcl: board: ti_am437x_evm: select jtag transport

default already is jtag, but this silences a
warning during startup.

Change-Id: I94478327bbb259649500ef74a5b5c10d51e2a517
Signed-off-by: Felipe Balbi <balbi@ti.com>
Reviewed-on: http://openocd.zylin.com/2612
Tested-by: jenkins
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
---

diff --git a/tcl/board/ti_am43xx_evm.cfg b/tcl/board/ti_am43xx_evm.cfg
index ff7ff645d1..3255e269f0 100644
--- a/tcl/board/ti_am43xx_evm.cfg
+++ b/tcl/board/ti_am43xx_evm.cfg
@@ -3,6 +3,7 @@
 # The JTAG interface is built directly on the board.
 source [find interface/ftdi/xds100v2.cfg]
 
+transport select jtag
 adapter_khz 16000
 
 source [find target/am437x.cfg]