From: Bas Vermeulen Date: Tue, 21 Nov 2017 16:12:24 +0000 (+0100) Subject: Only call cmsis_dap_cmd_DAP_SWD_Configure when swd_mode is enabled X-Git-Tag: v0.11.0-rc1~1315 X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=commitdiff_plain;h=06aebfacda1f60052f6ea0f3d09936184e1bfab8 Only call cmsis_dap_cmd_DAP_SWD_Configure when swd_mode is enabled The CMSIS-DAP used by NXP's LS1012ARDB board only supports JTAG, and not SWD. Calling cmsis_dap_cmd_DAP_SWD_Configure returns with an error (and doesn't actually do anything in the debugger). Wrap the call to cmsis_dap_cmd_DAP_SWD_Configure in a check for swd_mode, to make sure initialisation doesn't fail needlessly. Change-Id: Id7e568cb6e36886bd7c5b3699d198a77a51c28c9 Signed-off-by: Bas Vermeulen Reviewed-on: http://openocd.zylin.com/4294 Tested-by: jenkins Reviewed-by: Tomas Vanek Reviewed-by: Matthias Welwarsky --- diff --git a/src/jtag/drivers/cmsis_dap_usb.c b/src/jtag/drivers/cmsis_dap_usb.c index 19c3b19c92..345c1fd7e8 100644 --- a/src/jtag/drivers/cmsis_dap_usb.c +++ b/src/jtag/drivers/cmsis_dap_usb.c @@ -958,11 +958,14 @@ static int cmsis_dap_init(void) retval = cmsis_dap_cmd_DAP_TFER_Configure(0, 64, 0); if (retval != ERROR_OK) return ERROR_FAIL; - /* Data Phase (bit 2) must be set to 1 if sticky overrun - * detection is enabled */ - retval = cmsis_dap_cmd_DAP_SWD_Configure(0); /* 1 TRN, no Data Phase */ - if (retval != ERROR_OK) - return ERROR_FAIL; + + if (swd_mode) { + /* Data Phase (bit 2) must be set to 1 if sticky overrun + * detection is enabled */ + retval = cmsis_dap_cmd_DAP_SWD_Configure(0); /* 1 TRN, no Data Phase */ + if (retval != ERROR_OK) + return ERROR_FAIL; + } retval = cmsis_dap_cmd_DAP_LED(0x03); /* Both LEDs on */ if (retval != ERROR_OK)