From: Thomas Eichinger <eicht@lepus.uberspace.de>
Date: Thu, 22 Jan 2015 16:42:52 +0000 (+0100)
Subject: tcl/board: Add ST NUCLEO L152RE configuration
X-Git-Tag: v0.9.0-rc1~185
X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=commitdiff_plain;h=0d9ecc42d16f3a8b7db44a935a777e32bdb6a482

tcl/board: Add ST NUCLEO L152RE configuration

Added support for the ST nucleo l152re board with a stm32l152ret6 MCU,
analog to st_nucleo_f* configurations.

Change-Id: Id2c61dc7a7cb2e1cc64442191b367bab4247bdeb
Signed-off-by: Thomas Eichinger <eicht@lepus.uberspace.de>
Reviewed-on: http://openocd.zylin.com/2489
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
---

diff --git a/tcl/board/st_nucleo_l1.cfg b/tcl/board/st_nucleo_l1.cfg
new file mode 100644
index 0000000000..56e275627b
--- /dev/null
+++ b/tcl/board/st_nucleo_l1.cfg
@@ -0,0 +1,10 @@
+# This is an ST NUCLEO L152RE board with a single STM32L152RET6 chip.
+# http://www.st.com/web/catalog/tools/FM116/SC959/SS1532/LN1847/PF260002
+
+source [find interface/stlink-v2-1.cfg]
+
+transport select hla_swd
+
+source [find target/stm32l1.cfg]
+
+reset_config srst_only