From: Pushpal Sidhu <psidhu.devel@gmail.com>
Date: Tue, 5 Dec 2017 17:36:17 +0000 (-0800)
Subject: board: consolidate st_nucleo_l4 boards
X-Git-Tag: v0.11.0-rc1~1292
X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=commitdiff_plain;h=133e01d2af2a27d4f04c19285a3d561c5cfc92d6

board: consolidate st_nucleo_l4 boards

We can now use the generic stlink.cfg which allows for both ST-LINK/V2
and V2-1 debuggers.

Change-Id: I229c6fe5f6a6a4f2d3c787a49939846f102f9e24
Signed-off-by: Pushpal Sidhu <psidhu.devel@gmail.com>
Reviewed-on: http://openocd.zylin.com/4313
Tested-by: jenkins
Reviewed-by: Karl Palsson <karlp@tweak.net.au>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
---

diff --git a/tcl/board/st_nucleo_l476rg.cfg b/tcl/board/st_nucleo_l4.cfg
similarity index 51%
rename from tcl/board/st_nucleo_l476rg.cfg
rename to tcl/board/st_nucleo_l4.cfg
index 4426c3bc9e..1ab9da9b4d 100644
--- a/tcl/board/st_nucleo_l476rg.cfg
+++ b/tcl/board/st_nucleo_l4.cfg
@@ -1,5 +1,5 @@
-# This is a ST NUCLEO L476RG board with a single STM32L476RGT6 chip.
-# http://www.st.com/web/catalog/tools/FM116/SC959/SS1532/LN1847/PF261636
+# Should work with all STM32L4 Nucleo Dev Boards.
+# http://www.st.com/en/evaluation-tools/stm32-mcu-nucleo.html
 
 source [find interface/stlink.cfg]
 
@@ -9,4 +9,3 @@ source [find target/stm32l4x.cfg]
 
 # use hardware reset
 reset_config srst_only srst_nogate
-