From: Nemui Trinomius Date: Tue, 24 Feb 2015 11:37:20 +0000 (+0900) Subject: lpc2000: Add LPC407x/8x flash size auto detection X-Git-Tag: v0.9.0-rc1~106 X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=commitdiff_plain;h=199acf668e08457e972ab2cff10fd6327a33c4fb lpc2000: Add LPC407x/8x flash size auto detection This patch adds auto flash size detection for LPC407x/8x series. Tested on below listed chips. LPC4088 LPC1788(regression test) Change-Id: I82f62678a04eac9b84658bd6d1cfdf45be64c931 Signed-off-by: Nemui Trinomius Reviewed-on: http://openocd.zylin.com/2555 Tested-by: jenkins Reviewed-by: Paul Fertser Reviewed-by: Jens Bauer --- diff --git a/doc/openocd.texi b/doc/openocd.texi index 9adc80f34e..c708c20613 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -5208,7 +5208,7 @@ supported.} @deffn {Flash Driver} lpc2000 This is the driver to support internal flash of all members of the LPC11(x)00 and LPC1300 microcontroller families and most members of -the LPC800, LPC1500, LPC1700, LPC1800, LPC2000, LPC4300 and LPC54100 +the LPC800, LPC1500, LPC1700, LPC1800, LPC2000, LPC4000 and LPC54100 microcontroller families from NXP. @quotation Note @@ -5225,15 +5225,16 @@ which must appear in the following order: @item @var{variant} ... required, may be @option{lpc2000_v1} (older LPC21xx and LPC22xx) @option{lpc2000_v2} (LPC213x, LPC214x, LPC210[123], LPC23xx and LPC24xx) -@option{lpc1700} (LPC175x and LPC176x) +@option{lpc1700} (LPC175x and LPC176x and LPC177x/8x) @option{lpc4300} - available also as @option{lpc1800} alias (LPC18x[2357] and LPC43x[2357]) @option{lpc800} (LPC8xx) @option{lpc1100} (LPC11(x)xx and LPC13xx) @option{lpc1500} (LPC15xx) @option{lpc54100} (LPC541xx) +@option{lpc4000} (LPC40xx) or @option{auto} - automatically detects flash variant and size for LPC11(x)00, -LPC8xx, LPC13xx and LPC17xx +LPC8xx, LPC13xx, LPC17xx and LPC40xx @item @var{clock_kHz} ... the frequency, in kiloHertz, at which the core is running @item @option{calc_checksum} ... optional (but you probably want to provide this!), diff --git a/src/flash/nor/lpc2000.c b/src/flash/nor/lpc2000.c index 0b063d3007..c2a1fc2037 100644 --- a/src/flash/nor/lpc2000.c +++ b/src/flash/nor/lpc2000.c @@ -40,7 +40,7 @@ /** * @file - * flash programming support for NXP LPC8xx,LPC1xxx,LPC43xx,LP5410x and LPC2xxx devices. + * flash programming support for NXP LPC8xx,LPC1xxx,LPC4xxx,LP5410x and LPC2xxx devices. * * @todo Provide a way to update CCLK after declaring the flash bank. The value which is correct after chip reset will * rarely still work right after the clocks switch to use the PLL (e.g. 4MHz --> 100 MHz). @@ -65,13 +65,20 @@ * lpc1700: * - 175x * - 176x (tested with LPC1768) + * - 177x + * - 178x (tested with LPC1788) * - * lpc4300 (also available as lpc1800 - alias) + * lpc4000: (lpc1700's alias) + * - 407x + * - 408x (tested with LPC4088) + * + * lpc4300: (also available as lpc1800 - alias) * - 43x2 | 3 | 5 | 7 (tested with LPC4337/LPC4357) * - 18x2 | 3 | 5 | 7 * * lpc800: * - 810 | 1 | 2 (tested with LPC810/LPC811/LPC812) + * - 822 | 4 (tested with LPC824) * * lpc1100: * - 11xx @@ -100,6 +107,10 @@ * - 134x * - 175x * - 176x + * - 177x + * - 178x + * - 407x + * - 408x * - 81x * - 82x */ @@ -229,6 +240,12 @@ #define LPC1787 0x281D3747 #define LPC1788 0x281D3F47 +#define LPC4072 0x47011121 +#define LPC4074 0x47011132 +#define LPC4076 0x47191F43 +#define LPC4078 0x47193F47 +#define LPC4088 0x481D3F47 + #define LPC810_021 0x00008100 #define LPC811_001 0x00008110 #define LPC812_101 0x00008120 @@ -467,7 +484,7 @@ static int lpc2000_build_sector_list(struct flash_bank *bank) for (int i = 0; i < bank->num_sectors; i++) { bank->sectors[i].offset = offset; - /* sectors 0-15 are 4kB-sized, 16 and above are 32kB-sized for LPC17xx devices */ + /* sectors 0-15 are 4kB-sized, 16 and above are 32kB-sized for LPC17xx/LPC40xx devices */ bank->sectors[i].size = (i < 16) ? 4 * 1024 : 32 * 1024; offset += bank->sectors[i].size; bank->sectors[i].is_erased = -1; @@ -897,7 +914,7 @@ FLASH_BANK_COMMAND_HANDLER(lpc2000_flash_bank_command) lpc2000_info->variant = lpc2000_v1; } else if (strcmp(CMD_ARGV[6], "lpc2000_v2") == 0) { lpc2000_info->variant = lpc2000_v2; - } else if (strcmp(CMD_ARGV[6], "lpc1700") == 0) { + } else if (strcmp(CMD_ARGV[6], "lpc1700") == 0 || strcmp(CMD_ARGV[6], "lpc4000") == 0) { lpc2000_info->variant = lpc1700; } else if (strcmp(CMD_ARGV[6], "lpc1800") == 0 || strcmp(CMD_ARGV[6], "lpc4300") == 0) { lpc2000_info->variant = lpc4300; @@ -1369,6 +1386,7 @@ static int lpc2000_auto_probe_flash(struct flash_bank *bank) break; case LPC1752: + case LPC4072: lpc2000_info->variant = lpc1700; bank->size = 64 * 1024; break; @@ -1395,6 +1413,7 @@ static int lpc2000_auto_probe_flash(struct flash_bank *bank) case LPC1754: case LPC1764: case LPC1774: + case LPC4074: lpc2000_info->variant = lpc1700; bank->size = 128 * 1024; break; @@ -1412,6 +1431,7 @@ static int lpc2000_auto_probe_flash(struct flash_bank *bank) case LPC1776: case LPC1785: case LPC1786: + case LPC4076: lpc2000_info->variant = lpc1700; bank->size = 256 * 1024; break; @@ -1425,6 +1445,8 @@ static int lpc2000_auto_probe_flash(struct flash_bank *bank) case LPC1778: case LPC1787: case LPC1788: + case LPC4078: + case LPC4088: lpc2000_info->variant = lpc1700; bank->size = 512 * 1024; break; diff --git a/tcl/target/lpc1xxx.cfg b/tcl/target/lpc1xxx.cfg index 2a2db94e18..226425d41f 100644 --- a/tcl/target/lpc1xxx.cfg +++ b/tcl/target/lpc1xxx.cfg @@ -1,4 +1,4 @@ -# Main file for NXP LPC1xxx series Cortex-M0/0+/3 parts +# Main file for NXP LPC1xxx/LPC40xx series Cortex-M0/0+/3/4F parts # # !!!!!! # @@ -11,9 +11,10 @@ # LPC8xx chips support only SWD transport. # LPC11xx chips support only SWD transport. # LPC12xx chips support only SWD transport. -# LPC11Uxx chips support both JTAG and SWD transports. -# LPC13xx chips support both JTAG and SWD transports. +# LPC11Uxx chips support only SWD transports. +# LPC13xx chips support only SWD transports. # LPC17xx chips support both JTAG and SWD transports. +# LPC40xx chips support both JTAG and SWD transports. # Adapt based on what transport is active. source [find target/swj-dp.tcl] @@ -25,7 +26,7 @@ if { [info exists CHIPNAME] } { if { [info exists CHIPSERIES] } { # Validate chip series is supported - if { $CHIPSERIES != "lpc800" && $CHIPSERIES != "lpc1100" && $CHIPSERIES != "lpc1200" && $CHIPSERIES != "lpc1300" && $CHIPSERIES != "lpc1700" } { + if { $CHIPSERIES != "lpc800" && $CHIPSERIES != "lpc1100" && $CHIPSERIES != "lpc1200" && $CHIPSERIES != "lpc1300" && $CHIPSERIES != "lpc1700" && $CHIPSERIES != "lpc4000" } { error "Unsupported LPC1xxx chip series specified." } set _CHIPSERIES $CHIPSERIES @@ -43,10 +44,10 @@ if { [info exists CCLK] } { # Allow user override set _CCLK $CCLK } else { - # LPC8xx/LPC11xx/LPC12xx/LPC13xx use a 12MHz one, LPC17xx uses a 4MHz one + # LPC8xx/LPC11xx/LPC12xx/LPC13xx use a 12MHz one, LPC17xx uses a 4MHz one(except for LPC177x/8x,LPC407x/8x) if { $_CHIPSERIES == "lpc800" || $_CHIPSERIES == "lpc1100" || $_CHIPSERIES == "lpc1200" || $_CHIPSERIES == "lpc1300" } { set _CCLK 12000 - } elseif { $_CHIPSERIES == "lpc1700" } { + } elseif { $_CHIPSERIES == "lpc1700" || $_CHIPSERIES == "lpc4000" } { set _CCLK 4000 } } @@ -55,10 +56,10 @@ if { [info exists CPUTAPID] } { # Allow user override set _CPUTAPID $CPUTAPID } else { - # LPC8xx/LPC11xx/LPC12xx use a Cortex M0/M0+ core, LPC13xx/LPC17xx use a Cortex M3 core + # LPC8xx/LPC11xx/LPC12xx use a Cortex M0/M0+ core, LPC13xx/LPC17xx use a Cortex M3 core,LPC40xx use a Cortex-M4F core. if { $_CHIPSERIES == "lpc800" || $_CHIPSERIES == "lpc1100" || $_CHIPSERIES == "lpc1200" } { set _CPUTAPID 0x0bb11477 - } elseif { $_CHIPSERIES == "lpc1300" || $_CHIPSERIES == "lpc1700" } { + } elseif { $_CHIPSERIES == "lpc1300" || $_CHIPSERIES == "lpc1700" || $_CHIPSERIES == "lpc4000" } { if { [using_jtag] } { set _CPUTAPID 0x4ba00477 } { @@ -82,7 +83,8 @@ target create $_TARGETNAME cortex_m -chain-position $_TARGETNAME # The LPC12xx devices have 4/8kB of SRAM in the ARMv7-M "Code" area (at 0x10000000) # The LPC11Uxx devices have 4/6/8kB of SRAM in the ARMv7-M "Code" area (at 0x10000000) # The LPC13xx devices have 4/8kB of SRAM in the ARMv7-M "Code" area (at 0x10000000) -# The LPC17xx devices have 8/16/32kB of SRAM in the ARMv7-M "Code" area (at 0x10000000) +# The LPC17xx devices have 8/16/32/64kB of SRAM in the ARMv7-M "Code" area (at 0x10000000) +# The LPC40xx devices have 16/32/64kB of SRAM in the ARMv7-ME "Code" area (at 0x10000000) $_TARGETNAME configure -work-area-phys 0x10000000 -work-area-size $_WORKAREASIZE # The LPC11xx devies have 8/16/24/32/48/56/64kB of flash memory (at 0x00000000) @@ -90,6 +92,7 @@ $_TARGETNAME configure -work-area-phys 0x10000000 -work-area-size $_WORKAREASIZE # The LPC11Uxx devies have 16/24/32/40/48/64/96/128kB of flash memory (at 0x00000000) # The LPC13xx devies have 8/16/32kB of flash memory (at 0x00000000) # The LPC17xx devies have 32/64/128/256/512kB of flash memory (at 0x00000000) +# The LPC40xx devies have 64/128/256/512kB of flash memory (at 0x00000000) # # All are compatible with the "lpc1700" variant of the LPC2000 flash driver # (same cmd51 destination boundary alignment, and all three support 256 byte @@ -115,7 +118,7 @@ if { $_CHIPSERIES == "lpc800" || $_CHIPSERIES == "lpc1100" || $_CHIPSERIES == "l $_TARGETNAME configure -event reset-init { mww 0x40048000 0x02 } -} elseif { $_CHIPSERIES == "lpc1700" } { +} elseif { $_CHIPSERIES == "lpc1700" || $_CHIPSERIES == "lpc4000" } { # Do not remap 0x0000-0x0020 to anything but the flash (i.e. select # "User Flash Mode" where interrupt vectors are _not_ remapped, # and reside in flash instead). @@ -148,6 +151,7 @@ if {[using_jtag]} { # LPC8xx (Cortex M0+ core) support SYSRESETREQ # LPC11xx/LPC12xx (Cortex M0 core) support SYSRESETREQ # LPC13xx/LPC17xx (Cortex M3 core) support SYSRESETREQ +# LPC40xx (Cortex M4F core) support SYSRESETREQ if {![using_hla]} { # if srst is not fitted use SYSRESETREQ to # perform a soft reset diff --git a/tcl/target/lpc40xx.cfg b/tcl/target/lpc40xx.cfg new file mode 100644 index 0000000000..606cda5c17 --- /dev/null +++ b/tcl/target/lpc40xx.cfg @@ -0,0 +1,8 @@ +# NXP LPC40xx Cortex-M4F with at least 16kB SRAM +set CHIPNAME lpc40xx +set CHIPSERIES lpc4000 +if { ![info exists WORKAREASIZE] } { + set WORKAREASIZE 0x4000 +} + +source [find target/lpc1xxx.cfg]