From: Andreas Färber <afaerber@suse.de>
Date: Thu, 23 Apr 2015 12:06:46 +0000 (+0200)
Subject: tcl/board: Add Parallella-I board config
X-Git-Tag: v0.10.0-rc1~445
X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=commitdiff_plain;h=288a1f453d2c786332946f16d5610950daeb83e5;ds=sidebyside

tcl/board: Add Parallella-I board config

Tested with Porcupine-1 JTAG adapter board and Digilent JTAG-HS3 interface;
reset does not yet work, pending nSRST configuration of the interface used.

Change-Id: I0d0679e098d93ffbd1539004cdb900e2a8ae4a25
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/2730
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
---

diff --git a/tcl/board/adapteva_parallella1.cfg b/tcl/board/adapteva_parallella1.cfg
new file mode 100644
index 0000000000..83d1cd44b1
--- /dev/null
+++ b/tcl/board/adapteva_parallella1.cfg
@@ -0,0 +1,7 @@
+#
+# Adapteva Parallella-I board (via Porcupine-1 adapter board)
+#
+
+reset_config srst_only
+
+source [find target/zynq_7000.cfg]