From: David Brownell Date: Wed, 4 Aug 2010 01:29:05 +0000 (-0400) Subject: Luminary-icdi comment update X-Git-Tag: v0.5.0-rc1~466 X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=commitdiff_plain;h=28ddefd0659048773fd6066d0265fca76ca036d5 Luminary-icdi comment update Clarify that ICDI is the generic logic, but this config is for the JTAG-only (no-SWD) mode. Signed-off-by: David Brownell --- diff --git a/tcl/interface/luminary-icdi.cfg b/tcl/interface/luminary-icdi.cfg index ec77256243..94e00aee2f 100644 --- a/tcl/interface/luminary-icdi.cfg +++ b/tcl/interface/luminary-icdi.cfg @@ -2,6 +2,10 @@ # Luminary Micro Stellaris LM3S9B9x Evaluation Kits # In-Circuit Debug Interface (ICDI) Board # +# Essentially all Luminary debug hardware is the same, (with both +# JTAG and SWD support compatible with ICDI boards. This ICDI adapter +# configuration is JTAG-only, but the same hardware handles SWD too. +# # This is a discrete FT2232 based debug board which supports ARM's # JTAG/SWD connectors in both backwards-compatible 20-pin format and # in the new-style compact 10-pin. There's also an 8-pin connector