From: Andrey Yurovsky Date: Thu, 31 Oct 2013 06:32:40 +0000 (-0700) Subject: add TI TMS570 support scripts X-Git-Tag: v0.8.0-rc1~175 X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=commitdiff_plain;h=6accbb8baab5222ea6f1e1a3bd1c571124e7425c add TI TMS570 support scripts Add support for the TMS570 Cortex-R4 MCU from TI and their USB stick development kit, TMDX570LS31USB. Tested attaching, reset/halt/run, and reading and writing memory and registers. Change-Id: I12d779cef0c2b834f9bcf722307f35677cc4bd8f Signed-off-by: Andrey Yurovsky Signed-off-by: Andrey Smirnov Reviewed-on: http://openocd.zylin.com/1788 Tested-by: jenkins Reviewed-by: Spencer Oliver --- diff --git a/tcl/board/ti_tmdx570ls31usb.cfg b/tcl/board/ti_tmdx570ls31usb.cfg new file mode 100644 index 0000000000..550244429d --- /dev/null +++ b/tcl/board/ti_tmdx570ls31usb.cfg @@ -0,0 +1,6 @@ +adapter_khz 1500 + +source [find interface/ftdi/xds100v2.cfg] +source [find target/ti_tms570.cfg] + +reset_config trst_only diff --git a/tcl/target/ti_tms570.cfg b/tcl/target/ti_tms570.cfg new file mode 100644 index 0000000000..589e9d6cfd --- /dev/null +++ b/tcl/target/ti_tms570.cfg @@ -0,0 +1,53 @@ +adapter_khz 1500 + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME tms570 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN big +} + +# TMS570 has an ICEpick-C on which we need the router commands. +source [find target/icepick.cfg] + +# Main DAP +if { [info exists DAP_TAPID] } { + set _DAP_TAPID $DAP_TAPID +} else { + set _DAP_TAPID 0x0B8A002F +} +jtag newtap $_CHIPNAME dap -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_DAP_TAPID -disable +jtag configure $_CHIPNAME.dap -event tap-enable "icepick_c_tapenable $_CHIPNAME.jrc 0" + +# ICEpick-C (JTAG route controller) +if { [info exists JRC_TAPID] } { + set _JRC_TAPID $JRC_TAPID +} else { + set _JRC_TAPID 0x0B8A002F +} +jtag newtap $_CHIPNAME jrc -irlen 6 -ircapture 0x1 -irmask 0x3f \ + -expected-id $_JRC_TAPID -ignore-version +jtag configure $_CHIPNAME.jrc -event setup "jtag tapenable $_CHIPNAME.dap" +jtag configure $_CHIPNAME.jrc -event post-reset "runtest 100" + +# Cortex R4 target +set _TARGETNAME $_CHIPNAME.cpu +target create $_TARGETNAME cortex_r4 -endian $_ENDIAN \ + -chain-position $_CHIPNAME.dap -coreid 0 -dbgbase 0x00001003 + +$_TARGETNAME configure -event gdb-attach { + cortex_r4 dbginit + halt +} + +$_TARGETNAME configure -event "reset-assert" { + global _CHIPNAME + + # assert warm system reset through ICEPick + icepick_c_wreset $_CHIPNAME.jrc +}