From: Paul Fertser Date: Sun, 17 May 2015 21:34:18 +0000 (+0300) Subject: Restore normal development cycle X-Git-Tag: v0.10.0-rc1~474 X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=commitdiff_plain;h=70a14db147eb80398bb012d72dacec7b6adc18fe Restore normal development cycle Signed-off-by: Paul Fertser --- diff --git a/NEWS b/NEWS index e920a9c69e..9df165004a 100644 --- a/NEWS +++ b/NEWS @@ -2,92 +2,16 @@ This file includes highlights of the changes made in the OpenOCD source archive release. JTAG Layer: - * SWD support with FTDI, Versaloon, J-Link, sysfsgpio - * CMSIS-DAP massive speed and stability improvements - * Versaloon driver ported to libusb-1.0 - * STLink can reestablish communication with a target that was - disconnected or rebooted - * STLink FAULT and WAIT SWD handling improved - * New hla_serial command to distinguish between several HLA - adapters attached to a single machine - * Serial number support for CMSIS-DAP and J-Link adapters - * Support for more J-Link adapters - * TAP autoprobing improvements - * Big speedup for SVF playback with USB Blaster Boundary Scan: Target Layer: - * Stability improvements for targets that get disconnected or - rebooted during a debug session - * MIPS speed and reliability improvements - * MIPS 1.5/2.0 fixes - * ARMv7-R improvements - * Cortex-A improvements, A7, A15 MPCores support - * FPU support for ARMv7-M (Cortex-M4F) - * TPIU/ITM support (including SWO/SWV tracing), can be - captured with external tools or STLink - * JTAG Serial Port (Advanced Debug System softcore) support - * Profiling support for OpenRISC - * ChibiOS/RT 3.0 support (with and without FPU) - * FreeRTOS current versions support - * Freescale MQX RTOS support - * GDB target description support for MIPS - * The last created target is auto-selected as the current Flash Layer: - * nRF51 async loader to improve flashing performance and stability - * Cypress PSoC 41xx/42xx and CCG1 families flash driver - * Silabs SiM3 family flash driver - * Marvell Wireless Microcontroller SPI flash driver - * Kinetis mass erase (part unsecuring) implemented - * lpcspifi stability fixes - * STM32 family sync with reference manuals, L0 support, bugfixes - * LPC2000 driver automatically determines part and flash size - * NXP LPC11(x)xx, LPC13xx, LPC15xx, LPC8xx, LPC5410x, LPC407x support - * Atmel SAMD, SAMR, SAML21 devices support - * Atmel SAM4E16 support - * ZeroGecko family support - * TI Tiva C Blizzard and Snowflake families support - * Nuvoton NuMicro M051 support Board, Target, and Interface Configuration Scripts: - * Normal target configs can work with HLA (STLink, ICDI) adapters - * STM32 discovery and Nucleo boards configs - * Gumstix AeroCore board config - * General Plus GP326XXXA target config - * Micrel KS869x target config - * ASUS RT-N66U board config - * Atmel SAM4E-EK board config - * Atmel AT91SAM4L proper reset handling implemented - * TI OMAP/AM 3505, 3517 target configs - * nRF51822-mKIT board config - * RC Module К1879ХБ1Я target config - * TI TMDX570LS20SUSB board config - * TI TMS570 USB Kit board config - * TI CC2538, CC26xx target configs - * TI AM437x major config improvements, DDR support - * TI AM437X IDK board config - * TI SimpleLink Wi-Fi CC3200 LaunchPad configs - * Silicon Labs EM357, EM358 target configs - * Infineon XMC1000, XMC4000 family targets and boards configs - * Atheros AR9331 target config - * TP-LINK TL-MR3020 board config - * Alphascale asm9260t target and eval kit configs - * Olimex SAM7-LA2 (AT91SAM7A2) board config - * EFM32 Gecko boards configs - * Spansion FM4 target and SK-FM4-176L-S6E2CC board configs - * LPC1xxx target configs were restructured - * IoT-LAB debug adapter config - * DP BusBlaster KT-Link compatible config Server Layer: - * Polling period can be configured - * "shutdown" command has an immediate effect - * The "program" command doesn't lead to a shutdown by - default, use optional "exit" parameter for the old behaviour - * Proper OS signal handling was implemented - * Async target notifications for the Tcl RPC Documentation: @@ -98,7 +22,7 @@ This release also contains a number of other important functional and cosmetic bugfixes. For more details about what has changed since the last release, see the git repository history: -http://sourceforge.net/p/openocd/code/ci/v0.9.0/log/?path= +http://sourceforge.net/p/openocd/code/ci/v0.x.0/log/?path= For older NEWS, see the NEWS files associated with each release diff --git a/NEWS-0.9.0 b/NEWS-0.9.0 new file mode 100644 index 0000000000..77ae4b0706 --- /dev/null +++ b/NEWS-0.9.0 @@ -0,0 +1,110 @@ +This file includes highlights of the changes made in the OpenOCD +source archive release. + +JTAG Layer: + * SWD support with FTDI, Versaloon, J-Link, sysfsgpio + * CMSIS-DAP massive speed and stability improvements + * Versaloon driver ported to libusb-1.0 + * STLink can reestablish communication with a target that was + disconnected or rebooted + * STLink FAULT and WAIT SWD handling improved + * New hla_serial command to distinguish between several HLA + adapters attached to a single machine + * Serial number support for CMSIS-DAP and J-Link adapters + * Support for more J-Link adapters + * TAP autoprobing improvements + * Big speedup for SVF playback with USB Blaster + +Boundary Scan: + +Target Layer: + * Stability improvements for targets that get disconnected or + rebooted during a debug session + * MIPS speed and reliability improvements + * MIPS 1.5/2.0 fixes + * ARMv7-R improvements + * Cortex-A improvements, A7, A15 MPCores support + * FPU support for ARMv7-M (Cortex-M4F) + * TPIU/ITM support (including SWO/SWV tracing), can be + captured with external tools or STLink + * JTAG Serial Port (Advanced Debug System softcore) support + * Profiling support for OpenRISC + * ChibiOS/RT 3.0 support (with and without FPU) + * FreeRTOS current versions support + * Freescale MQX RTOS support + * GDB target description support for MIPS + * The last created target is auto-selected as the current + +Flash Layer: + * nRF51 async loader to improve flashing performance and stability + * Cypress PSoC 41xx/42xx and CCG1 families flash driver + * Silabs SiM3 family flash driver + * Marvell Wireless Microcontroller SPI flash driver + * Kinetis mass erase (part unsecuring) implemented + * lpcspifi stability fixes + * STM32 family sync with reference manuals, L0 support, bugfixes + * LPC2000 driver automatically determines part and flash size + * NXP LPC11(x)xx, LPC13xx, LPC15xx, LPC8xx, LPC5410x, LPC407x support + * Atmel SAMD, SAMR, SAML21 devices support + * Atmel SAM4E16 support + * ZeroGecko family support + * TI Tiva C Blizzard and Snowflake families support + * Nuvoton NuMicro M051 support + * EZR32 support in EFM32 driver + +Board, Target, and Interface Configuration Scripts: + * Normal target configs can work with HLA (STLink, ICDI) adapters + * STM32 discovery and Nucleo boards configs + * Gumstix AeroCore board config + * General Plus GP326XXXA target config + * Micrel KS869x target config + * ASUS RT-N66U board config + * Atmel SAM4E-EK board config + * Atmel AT91SAM4L proper reset handling implemented + * TI OMAP/AM 3505, 3517 target configs + * nRF51822-mKIT board config + * RC Module К1879ХБ1Я target config + * TI TMDX570LS20SUSB board config + * TI TMS570 USB Kit board config + * TI CC2538, CC26xx target configs + * TI AM437x major config improvements, DDR support + * TI AM437X IDK board config + * TI SimpleLink Wi-Fi CC3200 LaunchPad configs + * Silicon Labs EM357, EM358 target configs + * Infineon XMC1000, XMC4000 family targets and boards configs + * Atheros AR9331 target config + * TP-LINK TL-MR3020 board config + * Alphascale asm9260t target and eval kit configs + * Olimex SAM7-LA2 (AT91SAM7A2) board config + * EFM32 Gecko boards configs + * Spansion FM4 target and SK-FM4-176L-S6E2CC board configs + * LPC1xxx target configs were restructured + * IoT-LAB debug adapter config + * DP BusBlaster KT-Link compatible config + +Server Layer: + * Polling period can be configured + * "shutdown" command has an immediate effect + * The "program" command doesn't lead to a shutdown by + default, use optional "exit" parameter for the old behaviour + * Proper OS signal handling was implemented + * Async target notifications for the Tcl RPC + +Documentation: + +Build and Release: + + +This release also contains a number of other important functional and +cosmetic bugfixes. For more details about what has changed since the +last release, see the git repository history: + +http://sourceforge.net/p/openocd/code/ci/v0.9.0/log/?path= + + +For older NEWS, see the NEWS files associated with each release +(i.e. NEWS-). + +For more information about contributing test reports, bug fixes, or new +features and device support, please read the new Developer Manual (or +the BUGS and PATCHES.txt files in the source archive). diff --git a/configure.ac b/configure.ac index 10228081a7..687a404fd6 100644 --- a/configure.ac +++ b/configure.ac @@ -1,5 +1,5 @@ AC_PREREQ(2.64) -AC_INIT([openocd], [0.9.0], +AC_INIT([openocd], [0.10.0-dev], [OpenOCD Mailing List ]) AC_CONFIG_SRCDIR([src/openocd.c])