From: Tim 'mithro' Ansell <mithro@mithis.com>
Date: Sun, 27 Sep 2015 10:54:07 +0000 (+1000)
Subject: tcl: Adding the Digilent Atlys board.
X-Git-Tag: v0.10.0-rc1~433
X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=commitdiff_plain;h=9168eef15dc08937b600a8e05ba84c2adb6f4af0

tcl: Adding the Digilent Atlys board.

The board is supported via the ixo-usb-jtag firmware.

Change-Id: I1e8a5ead850c0843b8532a5b54a7e7117778278e
Signed-off-by: Tim 'mithro' Ansell <mithro@mithis.com>
Reviewed-on: http://openocd.zylin.com/2962
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
---

diff --git a/tcl/board/digilent_atlys.cfg b/tcl/board/digilent_atlys.cfg
new file mode 100644
index 0000000000..f298e3d73d
--- /dev/null
+++ b/tcl/board/digilent_atlys.cfg
@@ -0,0 +1,17 @@
+# http://digilentinc.com/atlys/
+#
+# The Digilent Atlys normally requires proprietary tools to program and will
+# enumerate as:
+#   ID 1443:0007 Digilent Development board JTAG
+#
+# However, the ixo-usb-jtag project provides an alternative open firmware for
+# the on board programmer. When using thie firmware the board will then
+# enumerate as:
+#   ID 16c0:06ad Van Ooijen Technische Informatica
+# (With SerialNumber == hw_nexys)
+#
+# See the interface/usb-jtag.cfg for more information.
+
+source [find interface/usb-jtag.cfg]
+source [find cpld/xilinx-xc6s.cfg]
+source [find cpld/jtagspi.cfg]