From: ntfreak Date: Wed, 11 Mar 2009 22:42:35 +0000 (+0000) Subject: - add support for standalone rlink X-Git-Tag: v0.2.0~1092 X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=commitdiff_plain;h=96413087dcf4bbe015c4e9af8dd982aa2710f29c;hp=e841dfc149110fac1ff08992fffdf823e1b94ffb - add support for standalone rlink https://lists.berlios.de/pipermail/openocd-development/2009-March/004965.html git-svn-id: svn://svn.berlios.de/openocd/trunk@1410 b42882b7-edfa-0310-969c-e2dbd0fdcd60 --- diff --git a/src/jtag/rlink/ep1_cmd.h b/src/jtag/rlink/ep1_cmd.h index 1b29f43e12..b30e1bb167 100644 --- a/src/jtag/rlink/ep1_cmd.h +++ b/src/jtag/rlink/ep1_cmd.h @@ -46,8 +46,8 @@ /* a quick way to just read back one byte */ #define EP1_CMD_DTC_GET_CACHED_STATUS (0x16) -/* Writes upper 2 bits port D with argument */ -#define EP1_CMD_SET_PORTD_UPPER (0x19) +/* Writes upper 2 bits (SHDN and SEL) of port D with argument */ +#define EP1_CMD_SET_PORTD_VPP (0x19) /* Writes lower 2 bits (BUSY and ERROR) of port D with argument */ #define EP1_CMD_SET_PORTD_LEDS (0x1a) diff --git a/src/jtag/rlink/rlink.c b/src/jtag/rlink/rlink.c index 380d451bbe..58067fbe35 100644 --- a/src/jtag/rlink/rlink.c +++ b/src/jtag/rlink/rlink.c @@ -72,25 +72,40 @@ #define DTC_STATUS_POLL_BYTE (ST7_USB_BUF_EP0OUT + 0xff) -/* Symbolic names for some pins */ -#define ST7_PA_NJTAG_TRST ST7_PA1 -#define ST7_PA_NRLINK_RST ST7_PA3 -#define ST7_PA_NLINE_DRIVER_ENABLE ST7_PA5 - -/* mask for negative-logic pins */ -#define ST7_PA_NUNASSERTED (0 \ - | ST7_PA_NJTAG_TRST \ - | ST7_PA_NRLINK_RST \ - | ST7_PA_NLINE_DRIVER_ENABLE \ -) - #define ST7_PD_NBUSY_LED ST7_PD0 -#define ST7_PD_NERROR_LED ST7_PD1 -#define ST7_PD_NRUN_LED ST7_PD7 +#define ST7_PD_NRUN_LED ST7_PD1 +/* low enables VPP at adapter header, high connects it to GND instead */ +#define ST7_PD_VPP_SEL ST7_PD6 +/* low: VPP = 12v, high: VPP <= 5v */ +#define ST7_PD_VPP_SHDN ST7_PD7 +/* These pins are connected together */ #define ST7_PE_ADAPTER_SENSE_IN ST7_PE3 #define ST7_PE_ADAPTER_SENSE_OUT ST7_PE4 +/* Symbolic mapping between port pins and numbered IO lines */ +#define ST7_PA_IO1 ST7_PA1 +#define ST7_PA_IO2 ST7_PA2 +#define ST7_PA_IO4 ST7_PA4 +#define ST7_PA_IO8 ST7_PA6 +#define ST7_PA_IO10 ST7_PA7 +#define ST7_PB_IO5 ST7_PB5 +#define ST7_PC_IO9 ST7_PC1 +#define ST7_PC_IO3 ST7_PC2 +#define ST7_PC_IO7 ST7_PC3 +#define ST7_PE_IO6 ST7_PE5 + +/* Symbolic mapping between numbered IO lines and adapter signals */ +#define ST7_PA_RTCK ST7_PA_IO0 +#define ST7_PA_NTRST ST7_PA_IO1 +#define ST7_PC_TDI ST7_PC_IO3 +#define ST7_PA_DBGRQ ST7_PA_IO4 +#define ST7_PB_NSRST ST7_PB_IO5 +#define ST7_PE_TMS ST7_PE_IO6 +#define ST7_PC_TCK ST7_PC_IO7 +#define ST7_PC_TDO ST7_PC_IO9 +#define ST7_PA_DBGACK ST7_PA_IO10 + static usb_dev_handle *pHDev; @@ -986,37 +1001,92 @@ void rlink_reset(int trst, int srst) u8 bitmap; int usb_err; - bitmap = ((~(ST7_PA_NLINE_DRIVER_ENABLE)) & ST7_PA_NUNASSERTED); + /* Read port A for bit op */ + usb_err = ep1_generic_commandl( + pHDev, 4, + EP1_CMD_MEMORY_READ, + ST7_PADR >> 8, + ST7_PADR, + 1 + ); + if(usb_err < 0) { + LOG_ERROR("%s", usb_strerror()); + exit(1); + } + + usb_err = usb_bulk_read( + pHDev, USB_EP1IN_ADDR, + (char *)&bitmap, 1, + USB_TIMEOUT_MS + ); + if(usb_err < 1) { + LOG_ERROR("%s", usb_strerror()); + exit(1); + } if(trst) { - bitmap &= ~ST7_PA_NJTAG_TRST; + bitmap &= ~ST7_PA_NTRST; + } else { + bitmap |= ST7_PA_NTRST; } + + /* Write port A and read port B for bit op */ + /* port B has no OR, and we want to emulate open drain on NSRST, so we initialize DR to 0 and assert NSRST by setting DDR to 1. */ + usb_err = ep1_generic_commandl( + pHDev, 9, + EP1_CMD_MEMORY_WRITE, + ST7_PADR >> 8, + ST7_PADR, + 1, + bitmap, + EP1_CMD_MEMORY_READ, + ST7_PBDDR >> 8, + ST7_PBDDR, + 1 + ); + if(usb_err < 0) { + LOG_ERROR("%s", usb_strerror()); + exit(1); + } + + usb_err = usb_bulk_read( + pHDev, USB_EP1IN_ADDR, + (char *)&bitmap, 1, + USB_TIMEOUT_MS + ); + if(usb_err < 1) { + LOG_ERROR("%s", usb_strerror()); + exit(1); + } + if(srst) { - bitmap &= ~ST7_PA_NRLINK_RST; + bitmap |= ST7_PB_NSRST; + } else { + bitmap &= ~ST7_PB_NSRST; } + /* write port B and read dummy to ensure completion before returning */ usb_err = ep1_generic_commandl( pHDev, 6, - EP1_CMD_MEMORY_WRITE, - ST7_PADR >> 8, - ST7_PADR, + ST7_PBDDR >> 8, + ST7_PBDDR, 1, bitmap, EP1_CMD_DTC_GET_CACHED_STATUS ); if(usb_err < 0) { - LOG_ERROR("%s: %s\n", __func__, usb_strerror()); + LOG_ERROR("%s", usb_strerror()); exit(1); } usb_err = usb_bulk_read( pHDev, USB_EP1IN_ADDR, - &bitmap, 1, + (char *)&bitmap, 1, USB_TIMEOUT_MS ); if(usb_err < 1) { - LOG_ERROR("%s: %s\n", __func__, usb_strerror()); + LOG_ERROR("%s", usb_strerror()); exit(1); } } @@ -1691,9 +1761,9 @@ int rlink_init(void) ST7_PEDR >> 8, ST7_PEDR, 3, - 0x00, - ST7_PE_ADAPTER_SENSE_OUT, - ST7_PE_ADAPTER_SENSE_OUT, + 0x00, /* DR */ + ST7_PE_ADAPTER_SENSE_OUT, /* DDR */ + ST7_PE_ADAPTER_SENSE_OUT, /* OR */ EP1_CMD_MEMORY_READ, /* Read back */ ST7_PEDR >> 8, ST7_PEDR, @@ -1725,9 +1795,9 @@ int rlink_init(void) ST7_PEDR >> 8, ST7_PEDR, 3, - 0x00, - 0x00, - 0x00 + 0x00, /* DR */ + 0x00, /* DDR */ + 0x00 /* OR */ ); usb_bulk_read( @@ -1741,24 +1811,40 @@ int rlink_init(void) LOG_WARNING("target not plugged in\n"); } - /* float port A, make sure DTC is stopped, set upper 2 bits of port D, and set up port A */ + /* float ports A and B */ ep1_generic_commandl( - pHDev, 15, + pHDev, 11, EP1_CMD_MEMORY_WRITE, ST7_PADDR >> 8, ST7_PADDR, 2, 0x00, 0x00, + EP1_CMD_MEMORY_WRITE, + ST7_PBDDR >> 8, + ST7_PBDDR, + 1, + 0x00 + ); + + /* make sure DTC is stopped, set VPP control, set up ports A and B */ + ep1_generic_commandl( + pHDev, 14, EP1_CMD_DTC_STOP, - EP1_CMD_SET_PORTD_UPPER, - ~(ST7_PD_NRUN_LED), + EP1_CMD_SET_PORTD_VPP, + ~(ST7_PD_VPP_SHDN), EP1_CMD_MEMORY_WRITE, ST7_PADR >> 8, ST7_PADR, 2, - ((~(ST7_PA_NLINE_DRIVER_ENABLE)) & ST7_PA_NUNASSERTED), - (ST7_PA_NLINE_DRIVER_ENABLE | ST7_PA_NRLINK_RST | ST7_PA_NJTAG_TRST) + ((~(0)) & (ST7_PA_NTRST)), + (ST7_PA_NTRST), + /* port B has no OR, and we want to emulate open drain on NSRST, so we set DR to 0 here and later assert NSRST by setting DDR bit to 1. */ + EP1_CMD_MEMORY_WRITE, + ST7_PBDR >> 8, + ST7_PBDR, + 1, + 0x00 ); /* set LED updating mode and make sure they're unlit */ @@ -1792,7 +1878,7 @@ int rlink_quit(void) EP1_CMD_LEDUE_NONE, EP1_CMD_SET_PORTD_LEDS, ~0, - EP1_CMD_SET_PORTD_UPPER, + EP1_CMD_SET_PORTD_VPP, ~0 );