From: Christopher Head Date: Fri, 14 Sep 2018 22:27:34 +0000 (-0700) Subject: target/stm32: make APCSW cacheable X-Git-Tag: v0.11.0-rc1~987 X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=commitdiff_plain;h=bdef93520a4721e1ed4ac4675476772fab064896 target/stm32: make APCSW cacheable Change-Id: I7c5c9720ded329848647f17db95f845e46c01c19 Signed-off-by: Christopher Head Reviewed-on: http://openocd.zylin.com/4674 Tested-by: jenkins Reviewed-by: Tomas Vanek --- diff --git a/tcl/target/stm32f7x.cfg b/tcl/target/stm32f7x.cfg index 562de30f6a..e06a34594f 100755 --- a/tcl/target/stm32f7x.cfg +++ b/tcl/target/stm32f7x.cfg @@ -145,3 +145,11 @@ $_TARGETNAME configure -event reset-start { # Reduce speed since CPU speed will slow down to 16MHz with the reset adapter_khz 2000 } + +# Set CSW[27], which according to ARM ADI v5 appendix E1.4 maps to AHB signal +# HPROT[3], which according to AMBA AHB/ASB/APB specification chapter 3.7.3 +# makes the data access cacheable. This allows reading and writing data in the +# CPU cache from the debugger, which is far more useful than going straight to +# RAM when operating on typical variables, and is generally no worse when +# operating on special memory locations. +$_CHIPNAME.dap apcsw 0x08000000 0x08000000 diff --git a/tcl/target/stm32h7x.cfg b/tcl/target/stm32h7x.cfg index 10477a5a70..e2ea8a84eb 100644 --- a/tcl/target/stm32h7x.cfg +++ b/tcl/target/stm32h7x.cfg @@ -92,3 +92,11 @@ $_TARGETNAME configure -event reset-init { # Clock after reset is HSI at 64 MHz, no need of PLL adapter_khz 4000 } + +# Set CSW[27], which according to ARM ADI v5 appendix E1.4 maps to AHB signal +# HPROT[3], which according to AMBA AHB/ASB/APB specification chapter 3.7.3 +# makes the data access cacheable. This allows reading and writing data in the +# CPU cache from the debugger, which is far more useful than going straight to +# RAM when operating on typical variables, and is generally no worse when +# operating on special memory locations. +$_CHIPNAME.dap apcsw 0x08000000 0x08000000