From: Paul Fertser <fercerpav@gmail.com>
Date: Wed, 23 Apr 2014 08:22:39 +0000 (+0400)
Subject: tcl/target/kl25.cfg: add maximum speed specification
X-Git-Tag: v0.9.0-rc1~388
X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=commitdiff_plain;h=c8c10f77dcbc6297f475af7e9768593a847665c2;ds=sidebyside

tcl/target/kl25.cfg: add maximum speed specification

Maximum frequency wasn't tested on hardware but the docs seem to be
quite explicit and do not mention any restrictions for that.

Change-Id: Idcf58df5358d06525e683f07c76eedad8f0b292d
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2120
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
---

diff --git a/tcl/target/kl25.cfg b/tcl/target/kl25.cfg
index 2ed6b0f17b..c2126c2c2d 100644
--- a/tcl/target/kl25.cfg
+++ b/tcl/target/kl25.cfg
@@ -51,6 +51,17 @@ $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE
 set _FLASHNAME $_CHIPNAME.flash
 flash bank $_FLASHNAME kinetis 0 0 0 0 $_TARGETNAME
 
+# Table 5-1. Clock Summary of KL25 Sub-Family Reference Manual
+# specifies up to 1MHz for VLPR mode.
+adapter_khz 1000
+
 # if srst is not fitted use SYSRESETREQ to
 # perform a soft reset
 cortex_m reset_config sysresetreq
+
+$_TARGETNAME configure -event reset-init {
+    # Table 5-1. Clock Summary of KL25 Sub-Family Reference Manual
+    # specifies up to 24MHz for run mode; Table 17 of Sub-Family Data
+    # Sheet rev4 lists 25MHz as the maximum frequency.
+    adapter_khz 24000
+}