From: Paul Fertser <fercerpav@gmail.com>
Date: Thu, 30 Oct 2014 13:22:40 +0000 (+0300)
Subject: drivers/stlink: clarify "init mode failed" message
X-Git-Tag: v0.9.0-rc1~167
X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=commitdiff_plain;h=d537cfa124b74ee2bd0d6997519868df756645e3

drivers/stlink: clarify "init mode failed" message

The message as it was didn't let the user know that something was wrong
with the target or wiring.

Change-Id: Ib609c2d31959e77413e61c348d0e31d7269d5c58
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2365
Tested-by: jenkins
Reviewed-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Reviewed-by: Jens Bauer <jens@gpio.dk>
---

diff --git a/src/jtag/drivers/stlink_usb.c b/src/jtag/drivers/stlink_usb.c
index b54fc4d737..4959f97cce 100644
--- a/src/jtag/drivers/stlink_usb.c
+++ b/src/jtag/drivers/stlink_usb.c
@@ -1831,7 +1831,7 @@ static int stlink_usb_open(struct hl_interface_param_s *param, void **fd)
 	err = stlink_usb_init_mode(h, param->connect_under_reset);
 
 	if (err != ERROR_OK) {
-		LOG_ERROR("init mode failed");
+		LOG_ERROR("init mode failed (unable to connect to the target)");
 		goto error_open;
 	}