From: Marek Vasut <marek.vasut@gmail.com>
Date: Fri, 29 Oct 2010 00:57:32 +0000 (+0200)
Subject: CortexA8: Introduce Freescale i.MX51 variant
X-Git-Tag: v0.5.0-rc1~359
X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=commitdiff_plain;h=d5b9c7998c43ee783c224035002cf32f062b0e2b;hp=1fa91f336ae35a0b7b127c81c46ff9b5041e088e

CortexA8: Introduce Freescale i.MX51 variant

This patch introduces support for Cortex A8 based Freescale i.MX51 CPU. This CPU
has the Debug Access Port located at a different address (0x60008000) than TI
OMAP3 series of CPUs.

i.MX51 configuration file based on OMAP3 configuration file and an email from
Alan Carvalho de Assis <acassis@gmail.com>.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
---

diff --git a/tcl/target/imx51.cfg b/tcl/target/imx51.cfg
new file mode 100644
index 0000000000..b1390ec2ef
--- /dev/null
+++ b/tcl/target/imx51.cfg
@@ -0,0 +1,51 @@
+# Freescale i.MX51
+
+if { [info exists CHIPNAME] } {
+   set  _CHIPNAME $CHIPNAME
+} else {
+   set  _CHIPNAME imx51
+}
+
+# CoreSight Debug Access Port
+if { [info exists DAP_TAPID ] } {
+   set _DAP_TAPID $DAP_TAPID
+} else {
+   set _DAP_TAPID 0x1ba00477
+}
+
+jtag newtap $_CHIPNAME DAP -irlen 4 -ircapture 0x1 -irmask 0xf \
+        -expected-id $_DAP_TAPID
+
+# SDMA / no IDCODE
+jtag newtap $_CHIPNAME SDMA -irlen 4 -ircapture 0x0 -irmask 0xf
+
+# SJC
+if { [info exists SJC_TAPID ] } {
+   set _SJC_TAPID SJC_TAPID
+} else {
+   set _SJC_TAPID 0x0190c01d
+}
+
+jtag newtap $_CHIPNAME SJC -irlen 5 -ircapture 0x1 -irmask 0x1f \
+        -expected-id $_SJC_TAPID -ignore-version
+
+# GDB target:  Cortex-A8, using DAP
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME cortex_a8 -chain-position $_CHIPNAME.DAP
+
+# some TCK tycles are required to activate the DEBUG power domain
+jtag configure $_CHIPNAME.SJC -event post-reset "runtest 100"
+
+# have the DAP "always" be active
+jtag configure $_CHIPNAME.SJC -event setup "jtag tapenable $_CHIPNAME.DAP"
+
+proc imx51_dbginit {target} {
+     # General Cortex A8 debug initialisation
+     cortex_a8 dbginit
+}
+
+# Slow speed to be sure it will work
+jtag_rclk 1000
+$_TARGETNAME configure -event "reset-start" { jtag_rclk 1000 }
+
+$_TARGETNAME configure -event reset-assert-post "imx51_dbginit $_TARGETNAME"