From: oharboe Date: Thu, 28 Feb 2008 11:52:26 +0000 (+0000) Subject: numerous fixes from Uwe Hermann X-Git-Tag: v0.1.0~911 X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=commitdiff_plain;h=e916cc840d66bffcd47af2170f64b6c84a449de9 numerous fixes from Uwe Hermann git-svn-id: svn://svn.berlios.de/openocd/trunk@378 b42882b7-edfa-0310-969c-e2dbd0fdcd60 --- diff --git a/doc/openocd.texi b/doc/openocd.texi index e31e8e0165..bccb090fb3 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -88,7 +88,7 @@ latest version (make sure there is no (non-svn) directory called "openocd" in th current directory): @smallexample - svn checkout svn://svn.berlios.de/openocd/trunk + svn checkout svn://svn.berlios.de/openocd/trunk openocd @end smallexample Building the OpenOCD requires a recent version of the GNU autotools. @@ -122,31 +122,31 @@ Bootstrap generates the configure script, and prepares building on your system. @smallexample ./configure @end smallexample -Configure generates the Makefiles used to build OpenOCD +Configure generates the Makefiles used to build OpenOCD. @smallexample make @end smallexample -Make builds the OpenOCD, and places the final executable in ./src/ +Make builds the OpenOCD, and places the final executable in ./src/. The configure script takes several options, specifying which JTAG interfaces should be included: @itemize @bullet @item ---enable-parport +@option{--enable-parport} @item ---enable-parport_ppdev +@option{--enable-parport_ppdev} @item ---enable-amtjtagaccel +@option{--enable-amtjtagaccel} @item ---enable-ft2232_ftd2xx +@option{--enable-ft2232_ftd2xx} @footnote{Using the latest D2XX drivers from FTDI and following their installation instructions, I had to use @option{--enable-ft2232_libftd2xx} for the OpenOCD to -build properly} +build properly.} @item ---enable-ft2232_libftdi +@option{--enable-ft2232_libftdi} @item ---with-ftd2xx=/path/to/d2xx/ +@option{--with-ftd2xx=/path/to/d2xx/} @end itemize If you want to access the parallel port using the PPDEV interface you have to specify @@ -1148,7 +1148,7 @@ flash probe 0 @section STR71x Script @cindex STR71x Script -The following script was used with an Amontec JTAGkey and a STR710 / STR711 cpu: +The following script was used with an Amontec JTAGkey and a STR710 / STR711 CPU: @smallexample #daemon configuration telnet_port 4444 @@ -1184,7 +1184,7 @@ flash bank str7x 0x40000000 0x00040000 0 0 0 STR71x @section STR750 Script @cindex STR750 Script -The following script was used with an Amontec JTAGkey and a STR750 cpu: +The following script was used with an Amontec JTAGkey and a STR750 CPU: @smallexample #daemon configuration telnet_port 4444 @@ -1225,7 +1225,7 @@ flash bank str7x 0x20000000 0x000040000 0 0 0 STR75x @section STR912 Script @cindex STR912 Script -The following script was used with an Amontec JTAGkey and a STR912 cpu: +The following script was used with an Amontec JTAGkey and a STR912 CPU: @smallexample #daemon configuration telnet_port 4444 @@ -1302,7 +1302,7 @@ flash bank str9x 0x00000000 0x00080000 0 0 0 @section STM32x Script @cindex STM32x Script -The following script was used with an Amontec JTAGkey and a STM32x cpu: +The following script was used with an Amontec JTAGkey and a STM32x CPU: @smallexample #daemon configuration telnet_port 4444 @@ -1381,7 +1381,7 @@ flash bank stm32x 0x08000000 0x00020000 0 0 0 @section LPC2129 Script @cindex LPC2129 Script -The following script was used with an wiggler PP and a LPC-2129 cpu: +The following script was used with an wiggler PP and a LPC-2129 CPU: @smallexample #daemon configuration telnet_port 4444 @@ -1416,7 +1416,7 @@ flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14765 calc_checksum @section LPC2148 Script @cindex LPC2148 Script -The following script was used with an Amontec JTAGkey and a LPC2148 cpu: +The following script was used with an Amontec JTAGkey and a LPC2148 CPU: @smallexample #daemon configuration telnet_port 4444 @@ -1452,7 +1452,7 @@ flash bank lpc2000 0x0 0x7d000 0 0 0 lpc2000_v1 14765 calc_checksum @section LPC2294 Script @cindex LPC2294 Script -The following script was used with an Amontec JTAGkey and a LPC2294 cpu: +The following script was used with an Amontec JTAGkey and a LPC2294 CPU: @smallexample #daemon configuration telnet_port 4444 @@ -1488,7 +1488,7 @@ flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14765 calc_checksum @section AT91R40008 Script @cindex AT91R40008 Script -The following script was used with an Amontec JTAGkey and a AT91R40008 cpu: +The following script was used with an Amontec JTAGkey and a AT91R40008 CPU: @smallexample #daemon configuration telnet_port 4444 @@ -1521,7 +1521,7 @@ run_and_halt_time 0 30 @section AT91SAM7s Script @cindex AT91SAM7s Script -The following script was used with an Olimex ARM-JTAG-OCD and a AT91SAM7S64 cpu: +The following script was used with an Olimex ARM-JTAG-OCD and a AT91SAM7S64 CPU: @smallexample #daemon configuration telnet_port 4444 @@ -1567,7 +1567,7 @@ flash bank at91sam7 0 0 0 0 0 @section XSCALE IXP42x Script @cindex XSCALE IXP42x Script -The following script was used with an Amontec JTAGkey-Tiny and a xscale ixp42x cpu: +The following script was used with an Amontec JTAGkey-Tiny and a xscale ixp42x CPU: @smallexample #daemon configuration telnet_port 4444 @@ -1653,7 +1653,7 @@ flash bank cfi 0x60000000 0x1000000 2 2 0 @section Hilscher netX 100 / 500 Script @cindex Hilscher netX 100 / 500 Script The following script was used with an Amontec JTAGkey and a Hilscher -netX 500 cpu: +netX 500 CPU: @smallexample #daemon configuration telnet_port 4444 @@ -1777,7 +1777,7 @@ that the openocd option @option{arm7_9 force_hw_bkpts} is not required when using a memory map. To view the configured memory map in gdb, use the gdb command @option{info mem} -All other unasigned addresses within gdb are treated as ram. +All other unasigned addresses within gdb are treated as RAM. If @option{gdb_flash_program enable} is also used, gdb will be able to program any flash memory using the vFlash interface. @@ -1798,7 +1798,7 @@ can be used. @chapter FAQ @cindex faq @enumerate -@item OpenOCD complains about a missing cygwin1.dll +@item OpenOCD complains about a missing cygwin1.dll. Make sure you have Cygwin installed, or at least a version of OpenOCD that claims to come with all the necessary dlls. When using Cygwin, try launching @@ -1811,7 +1811,7 @@ arm7_9_add_breakpoint(): sw breakpoint requested, but software breakpoints not e GDB issues software breakpoints when a normal breakpoint is requested, or to implement source-line single-stepping. On ARMv4T systems, like ARM7TDMI, ARM720t or ARM920t, software breakpoints consume one of the two available hardware breakpoints, -and are therefor disabled by default. If your code is running from RAM, you +and are therefore disabled by default. If your code is running from RAM, you can enable software breakpoints with the @option{arm7_9 sw_bkpts enable} command. If your code resides in Flash, you can't use software breakpoints, but you can force OpenOCD to use hardware breakpoints instead: @option{arm7_9 force_hw_bkpts enable}. @@ -1829,7 +1829,7 @@ I keep getting "Error: amt_jtagaccel.c:184 amt_wait_scan_busy(): amt_jtagaccel t out while waiting for end of scan, rtck was disabled". Make sure your PC's parallel port operates in EPP mode. You might have to try several -settings in your PC Bios (ECP, EPP, and different versions of those). +settings in your PC BIOS (ECP, EPP, and different versions of those). @item When debugging with the OpenOCD and GDB (plain GDB, Insight, or Eclipse), I get lots of "Error: arm7_9_common.c:1771 arm7_9_read_memory(): @@ -1855,8 +1855,8 @@ Toolchain (Eclipse, arm-elf-gcc, arm-elf-gdb), the debugging seems to be unstable. When single-stepping over large blocks of code, GDB and OpenOCD quit with an error message. Is there a stability issue with OpenOCD? -No, this is not a stability issue concering OpenOCD. Most users have solved -this issue by simply using a self-powered USB Hub, which they connect their +No, this is not a stability issue concerning OpenOCD. Most users have solved +this issue by simply using a self-powered USB hub, which they connect their Amontec JTAGkey to. Apparently, some computers do not provide a USB power supply stable enough for the Amontec JTAGkey to be operated. @@ -1868,7 +1868,7 @@ What does that mean and what might be the reason for this? First of all, the reason might be the USB power supply. Try using a self-powered hub instead of a direct connection to your computer. Secondly, the error code 4 corresponds to an FT_IO_ERROR, which means that the driver for the FTDI USB -Chip ran into some sort of error - this points us to a USB problem. +chip ran into some sort of error - this points us to a USB problem. @item When using the Amontec JTAGkey, sometimes OpenOCD crashes with the following error message: "Error: gdb_server.c:101 gdb_get_char(): read: 10054". @@ -1880,8 +1880,8 @@ has closed the connection to OpenOCD. This might be a GDB issue. @item In the configuration file in the section where flash device configurations are described, there is a parameter for specifying the clock frequency for LPC2000 internal flash devices (e.g. -@option{flash bank lpc2000 0x0 0x40000 0 0 lpc2000_v1 0 14746 calc_checksum}), -which must be sepcified in kilohertz. However, I do have a quartz crystal of a +@option{flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14746 calc_checksum}), +which must be specified in kilohertz. However, I do have a quartz crystal of a frequency that contains fractions of kilohertz (e.g. 14,745,600 Hz, i.e. 14,745.600 kHz). Is it possible to specify real numbers for the clock frequency? @@ -1903,6 +1903,8 @@ banks - a target references a jtag_device and a flash bank references a target). @item Sometimes my debugging session terminates with an error. When I look into the log file, I can see these error messages: Error: arm7_9_common.c:561 arm7_9_execute_sys_speed(): timeout waiting for SYSCOMP + +TODO. @end enumerate