From: Spencer Oliver <spen@spen-soft.co.uk>
Date: Wed, 26 Sep 2012 15:04:27 +0000 (+0100)
Subject: cfg: add ti ek-lm3s9d92 config
X-Git-Tag: v0.7.0-rc1~223
X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=commitdiff_plain;h=ebece4a9817e91c92884998b33aa921c3f277193

cfg: add ti ek-lm3s9d92 config

Change-Id: Ib09ca3e57de363a24d704b184ba8546bad08f56f
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/853
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
---

diff --git a/tcl/board/ek-lm3s9d92.cfg b/tcl/board/ek-lm3s9d92.cfg
new file mode 100644
index 0000000000..ed6f77a48c
--- /dev/null
+++ b/tcl/board/ek-lm3s9d92.cfg
@@ -0,0 +1,14 @@
+#
+# TI/Luminary Stellaris LM3S9D92 Evaluation Kits
+#
+# http://www.ti.com/tool/ek-lm3s9d92
+#
+
+# NOTE:  using the bundled FT2232 JTAG/SWD/SWO interface is optional!
+# so is using in JTAG mode, as done here.
+source [find interface/luminary-icdi.cfg]
+
+# 64k working area
+set WORKAREASIZE 0x10000
+set CHIPNAME lm3s9d92
+source [find target/stellaris.cfg]